Large deformations in oriented polymer glasses: experimental study and a new glass-melt constitutive model

An experimental study was made of the effects of prior molecular orientation on large tensile deformations of polystyrene in the glassy state. A new hybrid glass-melt constitutive model is proposed for describing and understanding the results, achieved by parallel coupling of the ROLIEPOLY molecularly-based melt model with a model previously proposed for polymer glasses. Monodisperse and polydisperse grades of polystyrene are considered. Comparisons between experimental results and simulations illustrate that the model captures characteristic features of both the melt and glassy states. Polystyrene was stretched in the melt state and quenched to below Tg, and then tensile tested parallel to the orientation direction near the glass transition. The degree of strain-hardening was observed to increase with increasing prior stretch of molecules within their entanglement tubes, as predicted by the constitutive model. This was explored for varying temperature of stretching, degree of stretching, and dwell time before quenching. The model in its current form, however, lacks awareness of processes of subentanglement chain orientation. Therefore, it under-predicts the orientation-direction strain hardening and yield stress increase, when stretching occurs at the lowest temperatures and shortest times, where it is dominated by subentanglement orientation

Using Solar Thermal Collectors for Plastic Recycling in Additive Manufacturing

Solar thermal applications vary widely across many different fields. This research aims to introduce the concept of using solar thermal energy in a new application for recycling waste plastic for use in 3D printing. In some countries or regions, waste plastic is not collected for recycling and thrown into landfills. This leads to serious local and global environmental pollution. In additive manufacturing, plastic is one of the main materials used to build 3D models. In this work we suggest a novel way to produce extruded filament for 3D printing from waste plastic using solar energy. The concept relies on using a Scheffler fixed focus solar collector to heat the barrel of a filament extruder rather than using electrical heaters. The barrel of the filament extruder is heated by a receiver in the focal point of the solar collector. The molten plastic is then extruded through a nozzle to produce filament. This concept of using solar power for extruding 3D printing filament is an environmentally friendly way to turn waste plastic into useful 3D printing material especially in areas where recycling of plastics does not exist and electrical power is limited

Solvent effects in permeation assessed in vivo by skin surface biopsy

BACKGROUND: Transdermal drug delivery has become an important means of drug administration. It presents numerous advantages but it is still limited by the small number of drugs with a suitable profile. The use of solvents that affect the skin barrier function is one of the classic strategies of penetration enhancement. Some of these solvents have well characterised actions on the stratum corneum, but the majority are still selected using empirical criteria. The objective of this work was to conduct a systematic study on the ability to affect skin permeation of solvents commonly used in transdermal formulations. An innovative methodology in this area was employed, consisting of the combination of skin surface biopsy with colorimetry. METHODS: The study compared in vivo differences in the permeation of a hydrophilic (methylene blue) and a lipophilic (Sudan III) dye, after treatment of the skin with different vehicles. Consecutive skin surface biopsies of each site were taken and the cumulative amounts of the dyes in the stripped stratum corneum were measured by reflectance colourimetry. RESULTS: Results indicate that the amount of methylene blue present in the stratum corneum varied significantly with different skin pre-treatments. Some solvents provided a 1.5 fold penetration enhancement but others decreased by almost half the permeation of the dye. The permeation of Sudan III was less significantly affected by solvent pre-treatment. CONCLUSIONS: This study has only superficially explored the potential of the combination of skin surface biopsy and colourimetry, but the encouraging results obtained confirm that the methodology can be extended to the study of more complex formulations

Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid

Gaining a molecular understanding of material extrusion (MatEx) 3D printing is crucial to predicting and controlling part properties. Here we report the direct observation of distinct birefringence localised to the weld regions between the printed filaments, indicating the presence of molecular orientation that is absent from the bulk of the filament. The value of birefringence at the weld increases at higher prints speeds and lower nozzle temperatures, and is found to be detrimental to the weld strength measured by tensile testing perpendicular to the print direction. We employ a molecularly-aware non-isothermal model of the MatEx flow and cooling process to predict the degree of alignment trapped in the weld at the glass transition. We find that the predicted residual alignment factor is linearly related to the extent of birefringence. Thus, by combining experiments and molecular modelling, we show that weld strength is not limited by inter-diffusion, as commonly expected, but instead by the configuration of the entangled polymer network. We adapt the classic molecular interpretation of glassy polymer fracture to explain how the measured weld strength decreases with increasing print speed and decreasing nozzle temperature

The Porphyromonas gingivalis/host interactome shows enrichment in GWASdb genes related to Alzheimer’s disease, diabetes and cardiovascular diseases

Periodontal disease is of established aetiology in which polymicrobial synergistic ecology has become dysbiotic under the influence of Porphyromonas gingivalis. Following breakdown of the host’s protective oral tissue barriers, P. gingivalis migrates to developing inflammatory pathologies that associate with Alzheimer’s disease (AD). Periodontal disease is a risk factor for cardiovascular disorders (CVD), type II diabetes mellitus (T2DM), AD and other chronic diseases, whilst T2DM exacerbates periodontitis. This study analysed the relationship between the P. gingivalis/host interactome and the genes identified in genome-wide association studies (GWAS) for the aforementioned conditions using data from GWASdb (P<1E-03) and, in some cases, from the NCBI/EBI GWAS database (P< 1E-05). Gene expression data from periodontitis or P. gingivalis microarray was compared to microarray datasets from the AD hippocampus and/or from carotid artery plaques. The results demonstrated that the host genes of the P. gingivalis interactome were significantly enriched in genes deposited in GWASdb genes related to cognitive disorders, AD and dementia, and its co-morbid conditions T2DM, obesity, and CVD. The P. gingivalis/host interactome was also enriched in GWAS genes from the more stringent NCBI-EBI database for AD, atherosclerosis and T2DM. The misregulated genes in periodontitis tissue or P. gingivalis infected macrophages also matched those in the AD hippocampus or atherosclerotic plaques. Together, these data suggest important gene/environment interactions between P. gingivalis and susceptibility genes or gene expression changes in conditions where periodontal disease is a contributory factor

The identification of proteoglycans and glycosaminoglycans in archaeological human bones and teeth

Bone tissue is mineralized dense connective tissue consisting mainly of a mineral component (hydroxyapatite) and an organic matrix comprised of collagens, non-collagenous proteins and proteoglycans (PGs). Extracellular matrix proteins and PGs bind tightly to hydroxyapatite which would protect these molecules from the destructive effects of temperature and chemical agents after death. DNA and proteins have been successfully extracted from archaeological skeletons from which valuable information has been obtained; however, to date neither PGs nor glycosaminoglycan (GAG) chains have been studied in archaeological skeletons. PGs and GAGs play a major role in bone morphogenesis, homeostasis and degenerative bone disease. The ability to isolate and characterize PG and GAG content from archaeological skeletons would unveil valuable paleontological information. We therefore optimized methods for the extraction of both PGs and GAGs from archaeological human skeleto ns. PGs and GAGs were successfully extracted from both archaeological human bones and teeth, and characterized by their electrophoretic mobility in agarose gel, degradation by specific enzymes and HPLC. The GAG populations isolated were chondroitin sulfate (CS) and hyaluronic acid (HA). In addition, a CSPG was detected. The localization of CS, HA, three small leucine rich PGs (biglycan, decorin and fibromodulin) and glypican was analyzed in archaeological human bone slices. Staining patterns were different for juvenile and adult bones, whilst adolescent bones had a similar staining pattern to adult bones. The finding that significant quantities of PGs and GAGs persist in archaeological bones and teeth opens novel venues for the field of Paleontology

Empirical Evaluation of Bone Extraction Protocols

The application of high-resolution analytical techniques to characterize ancient bone proteins requires clean, efficient extraction to obtain high quality data. Here, we evaluated many different protocols from the literature on ostrich cortical bone and moa cortical bone to evaluate their yield and relative purity using the identification of antibody-antigen complexes on enzyme-linked immunosorbent assay and gel electrophoresis. Moa bone provided an ancient comparison for the effectiveness of bone extraction protocols tested on ostrich bone. For the immunological part of this study, we focused on collagen I, osteocalcin, and hemoglobin because collagen and osteocalcin are the most abundant proteins in the mineralized extracellular matrix and hemoglobin is common in the vasculature. Most of these procedures demineralize the bone first, and then the remaining organics are chemically extracted. We found that the use of hydrochloric acid, rather than ethylenediaminetetraacetic acid, for demineralization resulted in the cleanest extractions because the acid was easily removed. In contrast, the use of ethylenediaminetetraacetic acid resulted in smearing upon electrophoretic separation, possibly indicating these samples were not as pure. The denaturing agents sodium dodecyl sulfate, urea, and guanidine HCl have been used extensively for the solubilization of proteins in non-biomineralized tissue, but only the latter has been used on bone. We show that all three denaturing agents are effective for extracting bone proteins. One additional method tested uses ammonium bicarbonate as a solubilizing buffer that is more appropriate for post-extraction analyses (e.g., proteomics) by removing the need for desalting. We found that both guanidine HCl and ammonium bicarbonate were effective for extracting many bone proteins, resulting in similar electrophoretic patterns. With the increasing use of proteomics, a new generation of scientists are now interested in the study of proteins from not only extant bone but also from ancient bone