5,529 research outputs found
A catch-free stock assessment model with application to goliath grouper (Epinephelus itajara) off southern Florida
Many modern stock assessment methods provide the machinery for determining the status of a stock in relation to certain reference points and for estimating how quickly a stock can be rebuilt. However, these methods typically require catch data, which are not always available. We introduce a model-based framework for estimating reference points, stock status, and recovery times in situations where catch data and other measures of absolute abundance are unavailable. The specif ic estimator developed is essentially an age-structured production model recast in terms relative to pre-exploitation levels. A Bayesian estimation scheme is adopted to allow the incorporation of pertinent auxiliary information such as might be obtained from meta-analyses of similar stocks or anecdotal observations. The approach is applied to the population of goliath grouper (Epinephelus itajara) off southern Florida, for which there are three indices of relative abundance but no reliable catch data. The results confirm anecdotal accounts of a marked decline in abundance during the 1980s followed by a substantial increase after the harvest of goliath grouper was banned in 1990. The ban appears to have reduced fishing pressure to between 10% and 50% of the levels observed during the 1980s. Nevertheless, the predicted fishing mortality rate under the ban appears to remain substantial, perhaps owing to illegal harvest and depth-related release mortality. As a result, the base model predicts that there is less than a 40% chance that the spawning biomass will recover to a level that would produce a 50% spawning potential ratio
The real time mass evaluation system as a tool for detection of undeclared cascade operation at GCEPs
Given the flexibility of current cascade designs a real time mass monitoring system is preferred for safeguarding Gas Centrifuge Enrichment Plants. However, if such a system is to be installed in a GCEP it must not impinge on plant operation or be intrusive. Since load cells are already part of the operational process and located outside the cascade hall their exploitation for safeguards purposes is an obvious development. The paper describes, through dynamic simulations, how transients would be observed in real-time mass balances when undeclared cascade operation takes place in a declared facility
Cable compliance
The object of the investigation was to solve mechanical problems using cable-in-bending and cable-in-torsion. These problems included robotic contacts, targets, and controls using cable compliance. Studies continued in the use of cable compliance for the handicapped and the elderly. These included work stations, walkers, prosthetic knee joints, elbow joints, and wrist joints. More than half of these objects were met, and models were made and studies completed on most of the others. It was concluded that the many different and versatile solutions obtained only opened the door to many future challenges
Ti3SiC2-formation during Ti–C–Si multilayer deposition by magnetron sputtering at 650 °C
Titanium Silicon Carbide films were deposited from three separate magnetrons with elemental targets onto Si wafer substrates. The substrate was moved in a circular motion such that the substrate faces each magnetron in turn and only one atomic species (Ti, Si or C) is deposited at a time. This allows layer-by-layer film deposition. Material average composition was determined to Ti0.47Si0.14C0.39 by energy-dispersive X-ray spectroscopy. High-resolution transmission electron microscopy and Raman spectroscopy were used to gain insights into thin film atomic structure arrangements. Using this new deposition technique formation of Ti3SiC2 MAX phase was obtained at a deposition temperature of 650 °C, while at lower temperatures only silicides and carbides are formed. Significant sharpening of Raman E2g and Ag peaks associated with Ti3SiC2 formation was observed
Dirac points with giant spin-orbit splitting in the electronic structure of two-dimensional transition-metal carbides
Two-dimensional (2D) materials, especially their most prominent member,
graphene, have greatly influenced many scientific areas. Moreover, they have
become a base for investigating the relativistic properties of condensed matter
within the emerging field of Dirac physics. This has ignited an intense search
for new materials where charge carriers behave as massless or massive Dirac
fermions. Here, we theoretically show the existence of Dirac electrons in a
series of 2D transition-metal carbides, known as MXenes. They possess twelve
conical crossings in the 1st Brillouin zone with giant spin-orbit splitting.
Our findings indicate that the 2D band structure of MXenes is protected against
external perturbations and preserved even in multilayer phases. These results,
together with the broad possibilities to engineer the properties of these
materials phases, make Dirac MXenes a potential candidate for studying and
developing novel Dirac-physics-based technologies.Comment: 4 figures and supplementar
Phase composition and transformations in magnetron-sputtered (Al,V)2O3 coatings
Coatings of (Al1-xVx)2O3, with x ranging from 0 to 1, were deposited by
pulsed DC reactive sputter deposition on Si(100) at a temperature of 550
{\deg}C. XRD showed three different crystal structures depending on V-metal
fraction in the coating: {\alpha}-V2O3 rhombohedral structure for 100 at.% V, a
defect spinel structure for the intermediate region, 63 - 42 at.% V. At lower
V-content, 18 and 7 at.%, a gamma-alumina-like solid solution was observed,
shifted to larger d-spacing compared to pure {\gamma}-Al2O3. The microstructure
changes from large columnar faceted grains for {\alpha}-V2O3 to smaller
equiaxed grains when lowering the vanadium content toward pure {\gamma}-Al2O3.
Annealing in air resulted in formation of V2O5 crystals on the surface of the
coating after annealing to 500 {\deg}C for 42 at.% V and 700 {\deg}C for 18
at.% V metal fraction respectively. The highest thermal stability was shown for
pure {\gamma}-Al2O3-coating, which transformed to {\alpha}-Al2O3 after
annealing to 1100{\deg} C. Highest hardness was observed for the Al-rich
oxides, ~24 GPa. The latter decreased with increasing V-content, larger than 7
at.% V metal fraction. The measured hardness after annealing in air decreased
in conjunction with the onset of further oxidation of the coatings
Raman scattering from high frequency phonons in supported n-graphene layer films
Results of room temperature Raman scattering studies of ultrathin graphitic
films supported on Si (111)/SiO2 substrates are reported. The results are
significantly different from those known for graphite. Spectra were collected
using 514 nm radiation on films containing from n=1 to 20 graphene layers, as
determined by atomic force microscopy. Both the 1st and 2nd order Raman spectra
show unique signatures of the number of layers in the film. The nGL film analog
of the Raman G-band in graphite exhibits a Lorentzian lineshape whose center
frequency shifts linearly relative to graphite as ~1/n (for n=1 G-band
frequency ~1588 cm-1). Three weak bands, identified with disorder-induced 1st
order scattering, are observed at ~ 1350, 1450 and 1500 cm-1. The 1500 cm-1
band is weak but relatively sharp and exhibits an interesting n-dependence. In
general, the intensity of these D-bands decreases dramatically with increasing
n. Three 2nd order bands are also observed (~2450, ~2700 and 3248 cm-1). They
are analogs to those observed in graphite. However, the ~2700 cm-1 band
exhibits an interesting and dramatic change of shape with n. Interestingly, for
n<5 this 2nd order band is more intense than the G-band.Comment: 10 pages, 7 fig'
- …