28 research outputs found

    Study of CuI thin films properties for application as anode buffer layer in organic solar cells

    Get PDF
    After chemico-physical characterization of CuI thin films, the structures indium tin oxide (ITO) /CuI are systematically studied. We show that the morphology of the 3 nm thick CuI film depends on its deposition rate. To obtain smooth homogeneous CuI film, it is necessary to depose it at 0.005 nm/s. After optimization of the deposition conditions of CuI, it is shown that it behaves like a template for the organic layer. For instance, when the organic film is copper-phthalocyanine, the molecules which are usually perpendicular to the plane of the substrate lie parallel to it when deposited onto CuI. In a same way, when the electron donor is a prophyrin derivative, CuI allows to double the power conversion efficiency of the cells based on the heterojunction porphyrin/C-60. When CuI is used as anode buffer layer, it increases systematically the short circuit current, the open circuit voltage, thus the efficiency of the organic solar cell. These effects are related, not only to the improvement of the band matching between the ITO and the electron donor, but also to the templating effect of the CuI. Moreover, we show that the beneficial effect of CuI. is effective, not only with ITO, but also with fluorine doped tin oxide

    Terrestrial exposure of a fresh Martian meteorite causes rapid changes in hydrogen isotopes and water concentrations

    Get PDF
    Determining the hydrogen isotopic compositions and H2O contents of meteorites and their components is important for addressing key cosmochemical questions about the abundance and source(s) of water in planetary bodies. However, deconvolving the effects of terrestrial contamination from the indigenous hydrogen isotopic compositions of these extraterrestrial materials is not trivial, because chondrites and some achondrites show only small deviations from terrestrial values such that even minor contamination can mask the indigenous values. Here we assess the effects of terrestrial weathering and contamination on the hydrogen isotope ratios and H2O contents of meteoritic minerals through monitored terrestrial weathering of Tissint, a recent Martian fall. Our findings reveal the rapidity with which this weathering affects nominally anhydrous phases in extraterrestrial materials, which illustrates the necessity of sampling the interiors of even relatively fresh meteorite falls and underlines the importance of sample return missions

    Cor triatriatum and lipomatous hypertrophy of the interatrial septum in the elderly: a case report

    Get PDF
    Cor triatriatum is a rare congenital heart defect characterized by the presence of a fibromuscular membrane dividing the left atrium into two distinct chambers. Lipomatous hypertrophy of the atrial septum is an infrequently observed benign abnormality caused by large fatty tissue deposits in the interatrial septum. An increased incidence of atrial arrhythmias is described in both pathologies, while a significant obstruction of blood flow mimicking mitral stenosis is typically manifested in cor triatriatum. We report the case of a 75-year-old woman with a previously undescribed association of the above stated abnormalities detected by both transthoracic and transeosophageal echocardiography. Diagnosis was confirmed by means of computed tomography. The singular physiologic and anatomic factors underlying survival until such a late age are described. The diagnostic, therapeutic and surgical management is discussed and a short review of the literature performed

    An ancient reservoir of volatiles in the Moon sampled by lunar meteorite Northwest Africa 10989

    Get PDF
    Northwest Africa (NWA) 10989 is a recently found lunar meteorite we used to elucidate the history of volatiles (H and Cl) in the Moon through analysis of its phosphates. The petrology, bulk geochemistry and mineralogy of NWA 10989 are consistent with it being a lunar meteorite with intermediate-iron bulk composition, composed of 40% of mare basaltic material and ~ 60% non-mare material, but with no obvious KREEP-rich basaltic components. It is probable that the source region for this meteorite resides near a mare–highlands boundary, possibly on the farside of the Moon. Analyses of chlorine and hydrogen abundances and isotopic composition in apatite and merrillite grains from NWA 10989 indicate sampling of at least two distinct reservoirs of volatiles, one being similar to those for known mare basalts from the Apollo collections, while the other potentially represents a yet unrecognized reservoir. In situ Th-U-Pb dating of phosphates reveal two distinct age clusters with one ranging from 3.98 ± 0.04 to 4.20 ± 0.02 Ga, similar to the ages of cryptomare material, and the other ranging from 3.32 ± 0.01 to 3.96 ± 0.03 Ga, closer to the ages of mare basalts known from the Apollo collections. This lunar breccia features mixing of material, among which a basaltic D-poor volatile reservoir which doesn’t appear to have been recorded by Apollo samples

    What is the Oxygen Isotope Composition of Venus? The Scientific Case for Sample Return from Earth’s “Sister” Planet

    Get PDF
    Venus is Earth’s closest planetary neighbour and both bodies are of similar size and mass. As a consequence, Venus is often described as Earth’s sister planet. But the two worlds have followed very different evolutionary paths, with Earth having benign surface conditions, whereas Venus has a surface temperature of 464 °C and a surface pressure of 92 bar. These inhospitable surface conditions may partially explain why there has been such a dearth of space missions to Venus in recent years.The oxygen isotope composition of Venus is currently unknown. However, this single measurement (Δ17O) would have first order implications for our understanding of how large terrestrial planets are built. Recent isotopic studies indicate that the Solar System is bimodal in composition, divided into a carbonaceous chondrite (CC) group and a non-carbonaceous (NC) group. The CC group probably originated in the outer Solar System and the NC group in the inner Solar System. Venus comprises 41% by mass of the inner Solar System compared to 50% for Earth and only 5% for Mars. Models for building large terrestrial planets, such as Earth and Venus, would be significantly improved by a determination of the Δ17O composition of a returned sample from Venus. This measurement would help constrain the extent of early inner Solar System isotopic homogenisation and help to identify whether the feeding zones of the terrestrial planets were narrow or wide.Determining the Δ17O composition of Venus would also have significant implications for our understanding of how the Moon formed. Recent lunar formation models invoke a high energy impact between the proto-Earth and an inner Solar System-derived impactor body, Theia. The close isotopic similarity between the Earth and Moon is explained by these models as being a consequence of high-temperature, post-impact mixing. However, if Earth and Venus proved to be isotopic clones with respect to Δ17O, this would favour the classic, lower energy, giant impact scenario.We review the surface geology of Venus with the aim of identifying potential terrains that could be targeted by a robotic sample return mission. While the potentially ancient tessera terrains would be of great scientific interest, the need to minimise the influence of venusian weathering favours the sampling of young basaltic plains. In terms of a nominal sample mass, 10 g would be sufficient to undertake a full range of geochemical, isotopic and dating studies. However, it is important that additional material is collected as a legacy sample. As a consequence, a returned sample mass of at least 100 g should be recovered.Two scenarios for robotic sample return missions from Venus are presented, based on previous mission proposals. The most cost effective approach involves a “Grab and Go” strategy, either using a lander and separate orbiter, or possibly just a stand-alone lander. Sample return could also be achieved as part of a more ambitious, extended mission to study the venusian atmosphere. In both scenarios it is critical to obtain a surface atmospheric sample to define the extent of atmosphere-lithosphere oxygen isotopic disequilibrium. Surface sampling would be carried out by multiple techniques (drill, scoop, “vacuum-cleaner” device) to ensure success. Surface operations would take no longer than one hour.Analysis of returned samples would provide a firm basis for assessing similarities and differences between the evolution of Venus, Earth, Mars and smaller bodies such as Vesta. The Solar System provides an important case study in how two almost identical bodies, Earth and Venus, could have had such a divergent evolution. Finally, Venus, with its runaway greenhouse atmosphere, may provide data relevant to the understanding of similar less extreme processes on Earth. Venus is Earth’s planetary twin and deserves to be better studied and understood. In a wider context, analysis of returned samples from Venus would provide data relevant to the study of exoplanetary systems

    Aluminium diboride-type structure in Ethiopian opal-CT revealed by fast Fourier transform

    No full text
    International audienc
    corecore