Disputed Paraphilia Diagnoses and Legal Decision Making: A Case Law Survey of Paraphilia NOS, Nonconsent

Paraphilia diagnoses applied in forensic settings are an ongoing subject of debate among psycholegal professionals and scholars. Disagreements pertain to both means-related issues having to do with issues of diagnostic reliability and validity, and ends-related issues regarding the consequences inherent to the legal contexts in which the diagnoses arise. To provide a fresh outlook on some of the issues, the present study entailed a systematic survey of U.S. case law to investigate the history, extent, and nature of forensic uses of a controversial paraphilia diagnosis, paraphilia not otherwise specified, nonconsent. Descriptive analyses revealed that use of the diagnosis, which occurred almost exclusively in adult sexually violent predator cases, increased substantially over the past decade, with cases in 3 states accounting for over 2/3 of the total observed prevalence rate. In the majority of cases examined in detail, the support that evaluators relied upon in making the diagnosis was either not clearly described or behaviorally inferential in nature, and the diagnosis was often accompanied by other mental and personality disorder diagnoses. An opposing expert was observed in more than half of the cases, approximately 1/3 of whom noted the debate surrounding the diagnosis and nearly 2/3 of whom opined that there was insufficient evidentiary support for the diagnosis in the case at bar. Finally, all courts that reached the issue of the admissibility of the diagnosis between 2008 and 2011 admitted it, and most courts also found it sufficient to support classifying an individual as a sexually violent predator

Low Mass Printable Devices for Energy Capture, Storage, and Use for Space Exploration Missions

The energy-efficient, environmentally friendly technology that will be presented is the result of a Space Act Agreement between -Technologies Worldwide, Inc., and the National Aeronautics and Space Administration s (NASA s) Marshall Space Flight Center (MSFC). This work combines semiconductor and printing technologies to advance lightweight electronic and photonic devices having excellent potential for commercial and exploration applications, and is an example of industry and government cooperation that leads to novel inventions. Device development involves three energy generation and consumption projects: 1) a low mass efficient (low power, low heat emission) micro light-emitting diode (LED) area lighting device; 2) a low-mass omni-directional efficient photovoltaic (PV) device with significantly improved energy capture; and 3) a new approach to building supercapacitors. These three technologies - energy capture, storage, and usage (e.g., lighting) - represent a systematic approach for building efficient local micro-grids that are commercially feasible; furthermore, these same technologies will be useful for lightweight power generation that enables inner planetary missions using smaller launch vehicles and facilitates surface operations. The PV device model is a two-sphere, light-trapped sheet approximately 2-mm thick. The model suggests a significant improvement over current thin film systems. All three components may be printed in line by printing sequential layers on a standard screen or flexographic direct impact press using the threedimensional printing technique (3DFM) patented by NthDegree. MSFC is testing the robustness of prototype devices in the harsh space and lunar surface environments, and available results will be reported. Unlike many traditional light sources, this device does not contain toxic compounds, and the LED component has passed stringent off-gassing tests required for potential manifesting on spacecraft such as the International Space Station. Future exploration missions will benefit from "green" technology lighting devices such as this, which show great promise for both terrestrial use and space missions

The effect of prolonged exposure to 750 C air on the tribological performance of PM212

The effect of prolonged exposure to 750 C air on the tribological performance and dimensional stability of PM212, a high temperature, self-lubricating composite, is studied. PM212, by weight, contains 70 percent metal-bonded Cr3C2, 15 percent BaF2/CaF2 eutectic, and 15 percent silver. Rub blocks were fabricated from PM212 by cold isostatic pressing followed by sintering. Prior to tribo-testing, the rub blocks were exposed to 750 C air for periods ranging from 100 to 1000 hours. Then, the rub blocks were slid against nickel-based superalloy disks in a double-rub-block tribometer in air under a 66 N load at temperatures from 25 to 750 C with a sliding velocity of 0.36 m/s. Unexposed rub blocks were tested for baseline comparison. Friction coefficients ranged from 0.24 to 0.37 for the unexposed rub blocks and from 0.32 to 0.56 for the exposed ones. Wear for both the composite blocks and superalloy disks was typically in the moderate to low range of 10(exp -5) to 10(exp -6) mm(exp 3)/N-m. Friction and wear data were similar for the rub blocks exposed for 100, 500, and 1000 hours. Prolonged exposure to 750 C air increased friction and wear of the PM212 rub blocks at room temperature, but their triboperformance remained unaffected at higher temperatures, probably due to the formation of lubricious metal oxides. Dimensional stability of the composite was studied by exposing specimens of varying thicknesses for 500 hours in air at 750 C. Block thicknesses were found to increase with increased exposure time until steady state was reached after 100 hours of exposure, probably due to oxidation

Contemplating Mindfulness at Work: An Integrative Review

Mindfulness research activity is surging within organizational science. Emerging evidence across multiple fields suggests that mindfulness is fundamentally connected to many aspects of workplace functioning, but this knowledge base has not been systematically integrated to date. This review coalesces the burgeoning body of mindfulness scholarship into a framework to guide mainstream management research investigating a broad range of constructs. The framework identifies how mindfulness influences attention, with downstream effects on functional domains of cognition, emotion, behavior, and physiology. Ultimately, these domains impact key workplace outcomes, including performance, relationships, and well-being. Consideration of the evidence on mindfulness at work stimulates important questions and challenges key assumptions within management science, generating an agenda for future research

Geochronology of the middle Eocene Purple Bench locality (Devil’s Graveyard Formation), Trans-Pecos Texas, USA

Purple Bench is a middle Eocene fossil locality in the Devil’s Graveyard Formation of the Trans-Pecos region of West Texas. In addition to yielding a range of taxa characteristic of the Uintan North American Land Mammal Age, the Purple Bench locality is noteworthy in documenting a number of endemic species that are known only from the site. Despite the Uintan character of the mammalian fauna, the absolute age of Purple Bench is a matter of debate. This uncertainty stems from the wide interval of time encompassed by current radiometric dates bracketing the Purple Bench locality and from conflicting magnetostratigraphic correlations in the Devil’s Graveyard Formation. This study constrains the absolute age of the Purple Bench locality through detrital zircon U-Pb geochronological analyses. For these analyses, 147 new detrital zircon U-Pb ages were collected from five tuffaceous sandstones and reworked tuff horizons and analyzed via Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICPMS). These new detrital zircon U-Pb geochronological analyses suggest a maximum depositional age of 43.7 +0.8 / -0.2 Ma for the Purple Bench tuff, a significant marker horizon immediately below the Purple Bench locality. These new maximum depositional age dates presented here provide constraints on the true depositional age of the lower and middle members of the Devil’s Graveyard Formation, bringing clarity to the previously ambiguous age of the fossil-bearing Purple Bench locality. The age constraints presented here also aid the characterization of the temporally and spatially variable Uintan North American Land Mammal Age

Low Mass Printable Devices for Energy Capture, Storage, and Use

The energy-efficient, environmentally friendly technology that will be presented is the result of a Space Act Agreement between NthDegree Technologies Worldwide, Inc., and the National Aeronautics and Space Administration's (NASA's) Marshall Space Flight Center (MSFC). The work combines semiconductor and printing technologies to advance lightweight electronic and photonic devices having excellent potential for commercial and exploration applications. Device development involves three projects that relate to energy generation and consumption: (1) a low-mass efficient (low power, low heat emission) micro light-emitting diode (LED) area lighting device; (2) a low-mass omni-directional efficient photovoltaic (PV) device with significantly improved energy capture; and (3) a new approach to building super-capacitors. These three technologies, energy capture, storage, and usage (e.g., lighting), represent a systematic approach for building efficient local micro-grids that are commercially feasible; furthermore, these same technologies, appropriately replacing lighting with lightweight power generation, will be useful for enabling inner planetary missions using smaller launch vehicles and to facilitate surface operations during lunar and planetary surface missions. The PV device model is a two sphere, light trapped sheet approximately 2-mm thick. The model suggests a significant improvement over current thin film systems. For lighting applications, all three technology components are printable in-line by printing sequential layers on a standard screen or flexographic direct impact press using the three-dimensional printing technique (3DFM) patented by NthDegree. One primary contribution to this work in the near term by the MSFC is to test the robustness of prototype devices in the harsh environments that prevail in space and on the lunar surface. It is anticipated that this composite device, of which the lighting component has passed off-gassing testing, will function appropriately in such environments consistent with NASA s exploration missions. Advanced technologies such as this show promise for both space flight and terrestrial applications

Comparative Brain Morphology of the Greenland and Pacific Sleeper Sharks and its Functional Implications

In cartilaginous fishes, variability in the size of the brain and its major regions is often associated with primary habitat and/or specific behavior patterns, which may allow for predictions on the relative importance of different sensory modalities. The Greenland (Somniosus microcephalus) and Pacific sleeper (S. pacificus) sharks are the only non-lamnid shark species found in the Arctic and are among the longest living vertebrates ever described. Despite a presumed visual impairment caused by the regular presence of parasitic ocular lesions, coupled with the fact that locomotory muscle power is often depressed at cold temperatures, these sharks remain capable of capturing active prey, including pinnipeds. Using magnetic resonance imaging (MRI), brain organization of S. microcephalus and S. pacificus was assessed in the context of up to 117 other cartilaginous fish species, using phylogenetic comparative techniques. Notably, the region of the brain responsible for motor control (cerebellum) is small and lacking foliation, a characteristic not yet described for any other large-bodied (\u3e3 m) shark. Further, the development of the optic tectum is relatively reduced, while olfactory brain regions are among the largest of any shark species described to date, suggestive of an olfactory-mediated rather than a visually-mediated lifestyle

Genomic Underpinnings of Population Persistence in Isle Royale Moose

Island ecosystems provide natural laboratories to assess the impacts of isolation on population persistence. However, most studies of persistence have focused on a single species, without comparisons to other organisms they interact with in the ecosystem. The case study of moose and gray wolves on Isle Royale allows for a direct contrast of genetic variation in isolated populations that have experienced dramatically differing population trajectories over the past decade. Whereas the Isle Royale wolf population recently declined nearly to extinction due to severe inbreeding depression, the moose population has thrived and continues to persist, despite having low genetic diversity and being isolated for ∼120 years. Here, we examine the patterns of genomic variation underlying the continued persistence of the Isle Royale moose population. We document high levels of inbreeding in the population, roughly as high as the wolf population at the time of its decline. However, inbreeding in the moose population manifests in the form of intermediate-length runs of homozygosity suggestive of historical inbreeding and purging, contrasting with the long runs of homozygosity observed in the smaller wolf population. Using simulations, we confirm that substantial purging has likely occurred in the moose population. However, we also document notable increases in genetic load, which could eventually threaten population viability over the long term. Overall, our results demonstrate a complex relationship between inbreeding, genetic diversity, and population viability that highlights the use of genomic datasets and computational simulation tools for understanding the factors enabling persistence in isolated populations

Retrospective Cohort Evaluating the Comparative Effectiveness of Ceftaroline and Daptomycin as First-Line Therapies for Inpatient Treatment of Diabetic Foot Infection in the United States Veterans Health Care System

Background Both ceftaroline and daptomycin are possible therapeutic options for diabetic foot infection (DFI) and both are active against methicillin-resistant Staphylococcus aureus (MRSA) infection; however, no previous studies have evaluated their efectiveness head-to-head. Objective This study compared hospital readmission and mortality proportions among patients receiving ceftaroline fosamil or daptomycin for DFI. Patients and Methods This was a retrospective cohort, comparative efectiveness study of adults (aged ≥ 18 years) admitted to United States Veterans Health Care System hospitals with a diagnosis code for DFI between 1 October 2010 and 30 September 2014 with an electronic order for ceftaroline or daptomycin as frst-line therapy within 14 days of admission. Baseline characteristics were compared using Chi-square, Fisher\u27s exact, and Wilcoxon rank-sum tests. Hospital readmission and patient mortality proportions were compared through multivariable logistic regression models with Hispanic ethnicity, prior hospitalization, dyslipidemia, and Charlson comorbidity score as covariates. Results In total, 223 patients were included (ceftaroline, n = 71; daptomycin n = 152). At baseline, ceftaroline patients were more likely to be Hispanic (18 vs. 6%, p \u3c 0.01) and have been hospitalized in the past 90 days (34 vs. 19%, p = 0.02). Unadjusted 90-day hospital readmission proportions for ceftaroline versus daptomycin were 34 vs. 49%, and unadjusted 90-day mortality proportions were 1% vs. 8%. In multivariable models, ceftaroline patients were less likely to experience 90-day hospital readmission (odds ratio [OR] 0.46, 95% confdence interval [CI] 0.25–0.85) and 90-day mortality (OR 0.14, 95% CI 0.01–0.77). Conclusions In this population, ceftaroline was associated with lower 90-day hospital readmission and 90-day mortality compared with daptomycin when used as frst-line therapy for DFI

Why do models overestimate surface ozone in the Southeast United States

Ozone pollution in the Southeast US involves complex chemistry driven by emissions of anthropogenic nitrogen oxide radicals (NOx  ≡  NO + NO2) and biogenic isoprene. Model estimates of surface ozone concentrations tend to be biased high in the region and this is of concern for designing effective emission control strategies to meet air quality standards. We use detailed chemical observations from the SEAC4RS aircraft campaign in August and September 2013, interpreted with the GEOS-Chem chemical transport model at 0.25°  ×  0.3125° horizontal resolution, to better understand the factors controlling surface ozone in the Southeast US. We find that the National Emission Inventory (NEI) for NOx from the US Environmental Protection Agency (EPA) is too high. This finding is based on SEAC4RS observations of NOx and its oxidation products, surface network observations of nitrate wet deposition fluxes, and OMI satellite observations of tropospheric NO2 columns. Our results indicate that NEI NOx emissions from mobile and industrial sources must be reduced by 30–60 %, dependent on the assumption of the contribution by soil NOx emissions. Upper-tropospheric NO2 from lightning makes a large contribution to satellite observations of tropospheric NO2 that must be accounted for when using these data to estimate surface NOx emissions. We find that only half of isoprene oxidation proceeds by the high-NOx pathway to produce ozone; this fraction is only moderately sensitive to changes in NOx emissions because isoprene and NOx emissions are spatially segregated. GEOS-Chem with reduced NOx emissions provides an unbiased simulation of ozone observations from the aircraft and reproduces the observed ozone production efficiency in the boundary layer as derived from a regression of ozone and NOx oxidation products. However, the model is still biased high by 6 ± 14 ppb relative to observed surface ozone in the Southeast US. Ozonesondes launched during midday hours show a 7 ppb ozone decrease from 1.5 km to the surface that GEOS-Chem does not capture. This bias may reflect a combination of excessive vertical mixing and net ozone production in the model boundary layer