133 research outputs found
Validation of Bioluminescent Escherichia Coli O157:H7 for Use as a Pre-Harvest Food Safety Model
Cattle are naturally colonized by enterohemorrhagic Escherichia coli within the gastrointestinal tract. The most notorious of the enterohemorrhagic E. coli is E. coli O157:H7, which can cause serious illness to humans if ingested. To ensure that the United States has a safe food supply, research is ongoing in pre-harvest food safety and pathogen intervention strategies. While advances in pre-harvest intervention strategies are encouraging, no method has proven to completely eliminate and/or control O157:H7. A key limitation to successful pathogen intervention strategies is the inability to track and monitor pathogens in a real-time fashion. Through the use of bioluminescent plasmids harboring the luxCDABE cassette, pathogen tracking could be a viable solution. Bioluminescent plasmids are capable of facilitating the tracking, pathogenesis and physical locations of pathogens, thus enabling researchers to have a better understanding of the pathogenic process
Additive manufacturing of cellular materials with tailored properties
The ability to pattern complex materials with high-speed and low-cost three-dimensional (3D) printing techniques is highly desirable. Here, we present progress on developing siloxane-based feedstock formulations, known as “inks,” for a unique 3D printing approach called Direct Ink Writing (DIW). DIW is a low-cost, mask-less printing route that enables rapid design and patterning of planar and three-dimensional (3D) microstructures. In this filamentary printing approach, a concentrated ink with tailored viscoelastic properties is deposited through a micro-nozzle that is translated using a multi-axis positioning stage. The ink rapidly solidifies as it is extruded so that 3D structures with fine features may be built up in a layer-by-layer fashion. We introduce the concept of tailoring the macro-scale mechanical properties by designing the 3D micro-architecture of the printed cellular silicone materials. We show the ability to obtain highly uniform or graded properties by simply adjusting the pattern design. Moreover, by understanding the materials-structure-processing property relationships, we have created a modeling-design-fabrication approach to achieve tailored mechanical properties. For example, we have created porous architectures that, in one case, are well suited for pure compression and, in a separate case, are better suited for shear environments. We expect that the ability to deterministically program mechanical performance from part-to-part and within a part will prove useful for many applications
Additively manufactured bio-based composites
The development of new materials solutions for advanced manufacturing and fabrication technologies is an increasing focus of many research and development efforts in applied materials science today. Advances in these areas are resulting in the development of novel, geometrically complex parts and functional devices in a multitude of arenas, such as the biomedical and aerospace industries. Recent progress in materials research includes; the development of polymer systems that are less reliant on petroleum-based products, and are instead based on renewable, bio-derived sources. Concurrently, new additive manufacturing (AM) technologies are allowing the production of complex parts with structures and physical response not typically achievable through conventional manufacturing means. AM has become a leader in manufacturing complex and previously difficult to fabricate structures with fine features, by employing three-dimensional printing methods such as direct ink write (DIW) and stereolithography (SL). Our materials based approach has been to develop tailored and functional polymer based feedstocks for such AM processes to expand the range of these versatile fabrication technologies and explore new design space for AM. Here we present stimuli responsive, tailorable and robust class of, printable bio-based polymer composite that has been three dimensionally printed via additive manufacturing methods to have micro and macro scale complexity in features and exhibit a strong, tunable shape memory response. The development, characterization and potential applications of these novel shape memory polymer composite AM structures will be discussed
Recommended from our members
Field responsive mechanical metamaterials.
Typically, mechanical metamaterial properties are programmed and set when the architecture is designed and constructed, and do not change in response to shifting environmental conditions or application requirements. We present a new class of architected materials called field responsive mechanical metamaterials (FRMMs) that exhibit dynamic control and on-the-fly tunability enabled by careful design and selection of both material composition and architecture. To demonstrate the FRMM concept, we print complex structures composed of polymeric tubes infilled with magnetorheological fluid suspensions. Modulating remotely applied magnetic fields results in rapid, reversible, and sizable changes of the effective stiffness of our metamaterial motifs
Recommended from our members
Nanocone‐Modified Surface Facilitates Gas Bubble Detachment for High‐Rate Alkaline Water Splitting
Abstract:
The significant amount of gas bubbles generated during high‐rate alkaline water splitting (AWS) can be detrimental to the process. The accumulation of bubbles will block the active catalytic sites and hinder the ion and electrolyte diffusion, limiting the maximum current density. Furthermore, the detachment of large bubbles can also damage the electrode's surface layer. Here, a general strategy for facilitating bubble detachment is demonstrated by modifying the nickel electrode surface with nickel nanocone nanostructures, which turns the surface into underwater superaerophobic. Simulation and experimental data show that bubbles take a considerably shorter time to detach from the nanocone‐modified nickel foil than the unmodified foil. As a result, these bubbles also have a smaller detachment size and less chance for bubble coalescence. The nanocone‐modified electrodes, including nickel foil, nickel foam, and 3D‐printed nickel lattice, all show substantially reduced overpotentials at 1000 mA cm−2 compared to their pristine counterpart. The electrolyzer assembled with two nanocone‐modified nickel lattice electrodes retains >95% of the performance after testing at ≈900 mA cm−2 for 100 h. The surface NC structure is also well preserved. The findings offer an exciting and simple strategy for enhancing the bubble detachment and, thus, the electrode activity for high‐rate AWS
Effect of Citrus Byproducts on Survival of O157:H7 and Non-O157 \u3ci\u3eEscherichia coli\u3c/i\u3e Serogroups within \u3ci\u3eIn Vitro\u3c/i\u3e Bovine Ruminal Microbial Fermentations
Citrus byproducts (CBPs) are utilized as a low cost nutritional supplement to the diets of cattle and have been suggested to inhibit the growth of both Escherichia coli O157:H7 and Salmonella. The objective of this study was to examine the effects in vitro that varying concentrations of CBP in the powdered or pelleted variety have on the survival of Shiga-toxin Escherichia coli (STEC) serotypes O26:H11, O103:H8, O111:H8, O145:H28, and O157:H7 in bovine ruminal microorganism media. The O26:H11, O111:H8, O145:H28, and O157:H7 serotypes did not exhibit a change in populations in media supplemented with CBP with either variety. The O103:H8 serotype displayed a general trend for an approximate 1 log10 reduction in 5% powdered CBP and 20% pelleted CBP over 6 h. There was a trend for reductions in populations of a variant form of O157:H7 mutated in the stx1 and stx2 genes in higher concentrations of CBP. These results suggest that variations exist in the survival of these serotypes of STEC within mixed ruminal microorganism fluid media when supplemented with CBP. Further research is needed to determine why CBPs affect STEC serotypes differently
Planar and Three-Dimensional Printing of Conductive Inks
Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical devices1-3. In this paper, we focus on one- (1D), two- (2D), and three-dimensional (3D) printing of conductive metallic inks in the form of flexible, stretchable, and spanning microelectrodes
Additive manufacturing: unlocking the evolution of energy materials
The global energy infrastructure is undergoing a drastic transformation towards renewable energy, posing huge challenges on the energy materials research, development and manufacturing. Additive manufacturing has shown its promise to change the way how future energy system can be designed and delivered. It offers capability in manufacturing complex 3D structures, with near-complete design freedom and high sustainability due to minimal use of materials and toxic chemicals. Recent literatures have reported that additive manufacturing could unlock the evolution of energy materials and chemistries with unprecedented performance in the way that could never be achieved by conventional manufacturing techniques. This comprehensive review will fill the gap in communicating on recent breakthroughs in additive manufacturing for energy material and device applications. It will underpin the discoveries on what 3D functional energy structures can be created without design constraints, which bespoke energy materials could be additively manufactured with customised solutions, and how the additively manufactured devices could be integrated into energy systems. This review will also highlight emerging and important applications in energy additive manufacturing, including fuel cells, batteries, hydrogen, solar cell as well as carbon capture and storage
- …