Pinching Dynamics of Thin Films of Binary Mixtures

In binary mixtures, the lifetimes of surface bubbles can be five orders of magnitude longer than those in pure liquids because of slightly different compositions of the bulk and the surfaces, leading to a thickness-dependent surface tension of thin films. Taking profit of the resulting simple surface rheology, we derive the equations describing the thickness, flow velocity and surface tension of a single liquid film. Numerical resolution shows that, after a first step of tension equilibration, a parabolic flow with mobile interfaces is associated with film pinching in a further drainage step. Our model paves the way for a better understanding of the rupture dynamics of liquid films.Comment: 21 pages, 6 figure

Self-similar impulsive capillary waves on a ligament

We study the short-time dynamics of a liquid ligament, held between two solid cylinders, when one is impulsively accelerated along its axis. A set of one-dimensional equations in the slender-slope approximation is used to describe the dynamics, including surface tension and viscous effects. An exact self-similar solution to the linearized equations is successfully compared to experiments made with millimetric ligaments. Another non-linear self-similar solution of the full set of equations is found numerically. Both the linear and non-linear solutions show that the axial depth at which the liquid is affected by the motion of the cylinder scales like $\sqrt{t}$. The non-linear solution presents the peculiar feature that there exists a maximum driving velocity $U^\star$ above which the solution disappears, a phenomenon probably related to the de-pinning of the contact line observed in experiments for large pulling velocities

Parametrically excited helicopter ground resonance dynamics with high blade asymmetries

The present work is aimed at verifying the influence of high asymmetries in the variation of in-plane lead-lag stiffness of one blade on the ground resonance phenomenon in helicopters. The periodical equations of motions are analyzed by using Floquet's Theory (FM) and the boundaries of instabilities predicted. The stability chart obtained as a function of asymmetry parameters and rotor speed reveals a complex evolution of critical zones and the existence of bifurcation points at low rotor speed values. Additionally, it is known that when treated as parametric excitations; periodic terms may cause parametric resonances in dynamic systems, some of which can become unstable. Therefore, the helicopter is later considered as a parametrically excited system and the equations are treated analytically by applying the Method of Multiple Scales (MMS). A stability analysis is used to verify the existence of unstable parametric resonances with first and second-order sets of equations. The results are compared and validated with those obtained by Floquet's Theory. Moreover, an explanation is given for the presence of unstable motion at low rotor speeds due to parametric instabilities of the second order

Calibration and validation of the STICS crop model for managing wheat irrigation in the semi-arid Marrakech/Al Haouz Plain

In the first part of this work, the shoot growth module and grain yield of the STICS crop model were calibrated and validated by using field data which was collected from irrigated winter wheat fields in the Haouz plain near Marrakech. The calibration was performed on the thermal units between the four phenological stages that control the dynamics of leaf area index and the thermal unit between emergence and the beginning of grain filling. The plant phenology was calibrated for three fields monitored during the 2002/03 season. Evaluation of the grain yields and the temporal evolution of leaf area index were done for six validation fields during 2003/04. The results showed the significant accuracy of the model in simulating these variables, and also indicated that the plants mainly suffered from lack of nitrogen. The results in the second part show the potential of crop modeling to schedule irrigation water, on the assumption that the plants were growing under optimal conditions of fertilization. In this case, the model was used to manage the time of irrigation according to a threshold for water deficit. Various simulations displayed logical trends in the relationship between the grain yield and both the amount and timing of irrigation water. These results were finally compared with those obtained from real irrigation practices. For the particular climate of 2003/04, the comparison showed that 70 mm and 40 mm of water could be saved in case of early and late sowing, respectively

Mechanically activated piezo channels modulate outflow tract valve development through the Yap1 and Klf2-Notch signaling axis

Mechanical forces are well known for modulating heart valve developmental programs. Yet, it is still unclear how genetic programs and mechanosensation interact during heart valve development. Here, we assessed the mechanosensitive pathways involved during zebrafish outflow tract (OFT) valve development in vivo. Our results show that the hippo effector Yap1, Klf2, and the Notch signaling pathway are all essential for OFT valve morphogenesis in response to mechanical forces, albeit active in different cell layers. Furthermore, we show that Piezo and TRP mechanosensitive channels are important factors modulating these pathways. In addition, live reporters reveal that Piezo controls Klf2 and Notch activity in the endothelium and Yap1 localization in the smooth muscle progenitors to coordinate OFT valve morphogenesis. Together, this work identifies a unique morphogenetic program during OFT valve formation and places Piezo as a central modulator of the cell response to forces in this process

Water use efficiency and yield of winter wheat under different irrigation regimes in a semi-arid region

In irrigation schemes under rotational water supply in semi-arid region, the water allocation and irrigation scheduling are often based on a fixed-area proportionate water depth with every irrigation cycle irrespective of crops and their growth stages, for an equitable water supply. An experiment was conducted during the 2004- 2005 season in Haouz irrigated area in Morocco, which objective was 1) to evaluate the effects of the surface irrigation scheduling method (ex-isting rule) adopted by the irrigation agency on winter wheat production compared to a full ir-rigation method and 2) to evaluate drip irrigation versus surface irrigation impacts on water sav-ing and yield of winter wheat. The methodology was based on the FAO-56 dual approach for the surface irrigation scheduling. Ground measure- ments of the Normalized Difference Vegetation Index (NDVI) were used to derive the basal crop coefficient and the vegetation fraction cover. The simple FAO-56 approach was used for drip irrigation scheduling. For surface irrigation, the existing rule approach resulted in yield and WUE reductions of 22% and 15%, respectively, compared with the optimized irrigation sched-uling proposed by the FAO-56 for full irrigation treatment. This revealed the negative effects of the irrigation schedules adopted in irrigation schemes under rotational water supply on crops productivity. It was also demonstrated that drip irrigation applied to wheat was more efficient with 20% of water saving in comparison with surface irrigation (full irrigation treatment). Drip irrigation gives also higher wheat yield com-pared to surface irrigation (+28% and +52% for full irrigation and existing rule treatments re-spectively). The same improvement was ob-served for water use efficiency (+24% and +59% respectively)

Accurate strain measurements in highly strained Ge microbridges

Ge under high strain is predicted to become a direct bandgap semiconductor. Very large deformations can be introduced using microbridge devices. However, at the microscale, strain values are commonly deduced from Raman spectroscopy using empirical linear models only established up to 1.2% for uniaxial stress. In this work, we calibrate the Raman-strain relation at higher strain using synchrotron based microdiffraction. The Ge microbridges show unprecedented high tensile strain up to 4.9 % corresponding to an unexpected 9.9 cm-1 Raman shift. We demonstrate experimentally and theoretically that the Raman strain relation is not linear and we provide a more accurate expression.Comment: 10 pages, 4 figure

Multi-insecticide resistant malaria vectors in the field remain susceptible to malathion, despite the presence of Ace1 point mutations

Insecticide resistance in Anopheles mosquitoes is seriously threatening the success of insecticide-based malaria vector control. Surveillance of insecticide resistance in mosquito populations and identifying the underlying mechanisms enables optimisation of vector control strategies. Here, we investigated the molecular mechanisms of insecticide resistance in three Anopheles coluzzii field populations from southern Cote d'Ivoire, including Agboville, Dabou and Tiassale. All three populations were resistant to bendiocarb, deltamethrin and DDT, but not or only very weakly resistant to malathion. The absence of malathion resistance is an unexpected result because we found the acetylcholinesterase mutation Ace1-G280S at high frequencies, which would typically confer cross-resistance to carbamates and organophosphates, including malathion. Notably, Tiassale was the most susceptible population to malathion while being the most resistant one to the pyrethroid deltamethrin. The resistance ratio to deltamethrin between Tiassale and the laboratory reference colony was 1,800 fold. By sequencing the transcriptome of individual mosquitoes, we found numerous cytochrome P450-dependent monooxygenases - including CYP6M2, CYP6P2, CYP6P3, CYP6P4 and CYP6P5 - overexpressed in all three field populations. This could be an indication for negative cross-resistance caused by overexpression of pyrethroid-detoxifying cytochrome P450s that may activate pro-insecticides, thereby increasing malathion susceptibility. In addition to the P450s, we found several overexpressed carboxylesterases, glutathione S-transferases and other candidates putatively involved in insecticide resistance

Simulation of dimensionality effects in thermal transport

The discovery of nanostructures and the development of growth and fabrication techniques of one- and two-dimensional materials provide the possibility to probe experimentally heat transport in low-dimensional systems. Nevertheless measuring the thermal conductivity of these systems is extremely challenging and subject to large uncertainties, thus hindering the chance for a direct comparison between experiments and statistical physics models. Atomistic simulations of realistic nanostructures provide the ideal bridge between abstract models and experiments. After briefly introducing the state of the art of heat transport measurement in nanostructures, and numerical techniques to simulate realistic systems at atomistic level, we review the contribution of lattice dynamics and molecular dynamics simulation to understanding nanoscale thermal transport in systems with reduced dimensionality. We focus on the effect of dimensionality in determining the phononic properties of carbon and semiconducting nanostructures, specifically considering the cases of carbon nanotubes, graphene and of silicon nanowires and ultra-thin membranes, underlying analogies and differences with abstract lattice models.Comment: 30 pages, 21 figures. Review paper, to appear in the Springer Lecture Notes in Physics volume "Thermal transport in low dimensions: from statistical physics to nanoscale heat transfer" (S. Lepri ed.