1,140 research outputs found
Cyclodextrin- grafted electrospun cellulose acetate nanofibers via "Click" reaction for removal of phenanthrene
Cataloged from PDF version of article.Beta-cyclodextrin (p-CD) functionalized cellulose acetate (CA) nanofibers have been successfully prepared by combining electrospinning and "click" reaction. Initially, p-CD and electrospun CA nanofibers were modified so as to be azide-p-CD and propargyl-terminated CA nanofibers, respectively. Then, "click" reaction was performed between modified CD molecules and CA nanofibers to obtain permanent grafting of CDs onto nanofibers surface. It was observed from the SEM image that, while CA nanofibers have smooth surface, there were some irregularities and roughness at nanofibers morphology after the modification. Yet, the fibrous structure was still protected. ATR-FTIR and XPS revealed that, CD molecules were successfully grafted onto surface of CA nanofibers. The adsorption capacity of p-CD-functionalized CA (CA-CD) nanofibers was also determined by removing phenanthrene (polycyclic aromatic hydrocarbons, PAH) from its aqueous solution. Our results indicate that CA-CD nanofibers have potential to be used as molecular filters for the purpose of water purification and waste water treatment by integrating the high surface area of nanofibers with inclusion complexation property of CD molecules. (C) 2014 Elsevier B.V. A
Nisin Production by Immobilized Microbial Cell Culture during Batch and Fed-Batch Fermentations with Various pH Profiles
In this study, nisin production has been enhanced by using batch and fed-batch fermentation with calcium-alginate immobilized cell culture. Due to the inhibitory effects of original phosphate rich growth medium on the immobilizing beads, an altered complex growth medium for nisin production was used. Various pH profiles were evaluated for both batch and fed-batch fermentations. For batch fermentations, a 2.1 fold higher nisin activity was obtained by allowing the pH to drop freely after 4 hrs of fermentation at constant pH. A periodic pH profile exhibited a detrimental effect on nisin production during batch fermentations. For fed-batch fermentations, a 2.9 fold higher nisin activity was obtained by allowing the pH to remain at pH of 6.8. Approximately the same maximum concentration, 3300 IU/ml, of nisin was observed when the best pH profile for batch and fed batch experiments were compared. The results also showed that immobilized cell culture can be used in order to improve nisin fermentation for both batch and fed-batch fermentation
Proton hot spots and exclusive vector meson production
We explore consequences of the existence of gluonic hot spots inside the proton for coherent and incoherent exclusive vector meson production cross sections in deep inelastic scattering. By working in the dilute limit of the Color Glass Condensate framework to compute the cross sections for Gaussian hot spots of fluctuating color charges and employing a nonrelativistic vector meson wave function, we are able to perform large parts of the calculation analytically. We find that the coherent cross section is sensitive to both the size of the target and the structure of the probe. The incoherent cross section is dominated by color fluctuations at small transverse momentum transfer (t), by proton and hot spot sizes as well as the structure of the probe at medium t and again by color fluctuations at large t. While the t-dependence of the cross section is well reproduced in our model, the relative normalization between the coherent and the incoherent cross sections points to the need for additional fluctuations in the proton.Peer reviewe
pH-responsive nanofibers with controlled drug release properties
Cataloged from PDF version of article.Smart polymers and nanofibers are potentially intriguing materials for controlled release of bioactive agents. This work describes a new class of pH responsive nanofibers for drug delivery systems with controlled release properties. Initially, poly(4-vinylbenzoic acid-co-(ar-vinylbenzyl) trimethylammonium chloride) [poly(VBA-co-VBTAC)] was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Then, ciprofloxacin was chosen as the model drug for the release study and encapsulated into pH-responsive polymeric carriers of poly(VBA-co-VBTAC) nanofibers via electrospinning. The morphology of the electrospun nanofibers was examined by scanning electron microscopy (SEM). The structural characteristics of the pH responsive nanofibers were investigated by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The release measurements of ciprofloxacin from pH responsive nanofibers were also performed by high-performance liquid chromatography (HPLC) analysis. To show the pH sensitivity of these nanofibers, the release profile of ciprofloxacin was examined under acidic, neutral and basic conditions. The results indicate that pH responsive nanofibers can serve as effective drug carriers since the release of ciprofloxacin could be controlled by changing the pH of the environment, and therefore these drug loaded pH-responsive nanofibers might have potential applications in the biomedical field. This journal is © The Royal Society of Chemistry
Bioactive surface design based on functional composite electrospun nanofibers for biomolecule immobilization and biosensor applications
Cataloged from PDF version of article.The combination of nanomaterials and conducting polymers attracted remarkable attention for development of new immobilization matrices for enzymes. Hereby, an efficient surface design was investigated by modifying the graphite rod electrode surfaces with one-step electrospun nylon 6,6 nanofibers or 4% (w/w) multiwalled carbon nanotubes (MWCNTs) incorporating nylon 6,6 nanofibers (nylon 6,6/4MWCNT). High-resolution transmission electron microscopy study confirmed the successful incorporation of the MWCNTs into the nanofiber matrix for nylon 6,6/4MWCNT sample. Then, these nanofibrous surfaces were coated with a conducting polymer, (poly-4-(4,7-di(thiophen-2-yl)-1H-benzo[d]imidazol-2-yl) benzaldehyde) (PBIBA) to obtain a high electroactive surface area as new functional immobilization matrices. Due to the free aldehyde groups of the polymeric structures, a model enzyme, glucose oxidase was efficiently immobilized to the modified surfaces via covalent binding. Scanning electron microscope images confirmed that the nanofibrous structures were protected after the electrodeposition step of PBIBA and a high amount of protein attachment was successfully achieved by the help of high surface to volume ratio of electroactive nanofiber matrices. The biosensors were characterized in terms of their operational and storage stabilities and kinetic parameters (K mapp and Imax). The resulting novel glucose biosensors revealed good stability and promising Imax values (10.03 and 16.67 μA for nylon 6,6/PBIBA and nylon 6,6/4MWCNT/PBIBA modified biosensors, respectively) and long shelf life (32 and 44 days for nylon 6,6/PBIBA and nylon 6,6/4MWCNT/PBIBA modified biosensors, respectively). Finally, the biosensor was tested on beverages for glucose detection. © 2014 American Chemical Society
Guided and magnetic self-assembly of tunable magnetoceptive gels
Self-assembly of components into complex functional patterns at microscale is common in nature, and used increasingly in numerous disciplines such as optoelectronics, microfabrication, sensors, tissue engineering and computation. Here, we describe the use of stable radicals to guide the self-assembly of magnetically tunable gels, which we call ‘magnetoceptive’ materials at the scale of hundreds of microns to a millimeter, each can be programmed by shape and composition, into heterogeneous complex structures. Using paramagnetism of free radicals as a driving mechanism, complex heterogeneous structures are built in the magnetic field generated by permanent magnets. The overall magnetic signature of final structure is erased via an antioxidant vitamin E, subsequent to guided self-assembly. We demonstrate unique capabilities of radicals and antioxidants in fabrication of soft systems with heterogeneity in material properties, such as porosity, elastic modulus and mass density; then in bottom-up tissue engineering and finally, levitational and selective assembly of microcomponents
YOUNG ADOLESCENT EFL LEARNERS’ PERSPECTIVES ON CRITICAL THINKING SKILLS
Critical Thinking Skills (CTs) are among the 21st century learning skills, and schools are expected to equip the students with these skills. Turkey has been restructuring the educational system in order to improve the quality of education which enables students to acquire such learning skills as critical and creative thinking, problem solving, and collaboration. The present study based on the perspectives of Young Adolescent EFF learners presents findings on the students’ awareness of CTs, and whether or not they apply them to a given task, and if there is any conflict between knowledge and application of CTs. The findings showed that the students, despite their quiet well awareness, they did not effectively apply CTs. The problems they encountered were assumed to be resulted from lacking in metacognitive knowledge
CMOS Realization of a Scalable High-Performance Binary Sorting Engine Suitable for Embedded Applications
Methods of cognitive status research in patients with glioblastoma
Introduction: Glioblastoma is a high-grade, aggressive central nervous system tumor with predominantly astrocytic differentiation, characterized by fast invasive growth into the surrounding brain parenchyma and aggressive clinical course. The short life expectancy of patients diagnosed with glioblastoma necessitates the need to maximize their quality of remaining life. One of the most common reasons for quality of life impairment in these patients is the cognitive deficit accompanying the disease. There is a lack of a unified and standardized method for the assessment of cognitive functions in these patients, which meets all the necessary criteria to be convenient and usable in the wide clinical practice.Aim: The aim of the present study is to compare the Montreal cognitive assessment (MoCA) brief screening test with an extended neuropsychological examination to determine its applicability in patients diagnosed with glioblastoma. Material and methods: The study includes 27 patients undergoing neurosurgical intervention for histologically proven IDH-wildtype glioblastoma in the Department of Neurosurgery, “St. Marina” University Hospital – a tertiary healthcare center, for the period January 2019 to December 2022. Preoperatively, patients were examined with the short MoCA screening test and an extended neuropsychological examination including the following subtests: Issac set test, Trail making test A and B, Luria test, Raven‘s color matrices, Stroop test and Bender test.Results: Of all the patients studied, those with a MoCA score below 26 points present at least one negative test of the extended neuropsychological examination. MoCA patients with scores of 26 or more do not demonstrate cognitive impairment in the extended neuropsychological impairment.Conclusion: The obtained results support the claim that the MoCA short screening test is applicable for preoperative diagnosis of cognitive disorders in patients with glioblastoma. Due to the study‘s small sample size, further research is needed to definitively prove this claim
Use of commercial off-the-shelf digital cameras for scientific data acquisition and scene-specific color calibration
Author Posting. © Optical Society of America, 2014. This article is posted here by permission of Optical Society of America for personal use, not for redistribution. The definitive version was published in Journal of the Optical Society of America A: Optics, Image Science, and Vision 31 (2014): 312-321, doi:10.1364/JOSAA.31.000312.Commercial off-the-shelf digital cameras are inexpensive and easy-to-use instruments that can be used for quantitative scientific data acquisition if images are captured in raw format and processed so that they maintain a linear relationship with scene radiance. Here we describe the image-processing steps required for consistent data acquisition with color cameras. In addition, we present a method for scene-specific color calibration that increases the accuracy of color capture when a scene contains colors that are not well represented in the gamut of a standard color-calibration target. We demonstrate applications of the proposed methodology in the fields of biomedical engineering, artwork photography, perception science, marine biology, and underwater imaging.T. Treibitz is an
Awardee of the Weizmann Institute of Science—National
Postdoctoral Award Program for Advancing Women in
Science and was supported by NSF grant ATM-0941760.
D. Akkaynak, J. Allen, and R. Hanlon were supported by
NSF grant 1129897 and ONR grants N0001406-1-0202 and N00014-10-1-0989 and U. Demirci by grants R01AI093282,
R01AI081534, and NIH U54EB15408. J. Allen is grateful for
support from a National Defense Science and Engineering
Graduate Fellowship
- …