Experimental Modeling of Combined and Sequential Use of Transosseous and Intramedullary Blocking Osteosynthesis

Background. The introduction of the combined and sequential application of transosseous and intramedullary blocked osteosynthesis in limb lengthening requires an experimental study of the features of distraction regenerate. For small animals (in particular rabbits), special models are required.Aims. To develop experimental models of sequential and combined use of transosseous and intramedullary osteosynthesis in limb lengthening and substantiate their effectiveness.Materials and methods. A comparative study was carried out on 30 rabbits of the Soviet Chinchilla breed. Experimental models of sequential (EM-1) and combined (EM-2) application of transosseous and intramedullary osteosynthesis with preservation of the apparatus during the fixation period to simulate blockage were studied in the main groups. For comparison, sequential (comparison model 1 – CM-1) and combined (comparison model 2 – CM-2) use of transosseous and intramedullary osteosynthesis with dismantling of the apparatus at the end of distraction were modeled. The control was a regenerate formed according to the classical Ilizarov method. Radiographs were performed in dynamics, CT and morphological studies – at the end of the fixation period.Results. It was noted that regenerates of the same type in structure were formed in the EM-1 and CM-1 groups, as in the EM-2 and CM-2 groups. With successive methods, the spindle-shaped form of the regenerate prevailed, the formation of a pronounced periosteal component was noted. Powerful cortical plates, according to morphological studies, are formed from the periosteal and intermediate zones. With combined techniques, the cortical plates are formed thinner and predominantly from the periosteal component, the shape of the regenerate is closer to fusiform. In the comparison groups, the total time of surgical interventions was 25–50 % longer, in 50 % of cases there was a loss of length or deformation of the regenerate.Conclusions. The developed models of sequential and combined use of transosseous and intramedullary osteosynthesis for limb lengthening with preservation of fixation with an apparatus to simulate blocking have proven to be reliable in terms of fixation and easy to use on small laboratory animals.

Measurement of inclusive D*+- and associated dijet cross sections in photoproduction at HERA

Inclusive photoproduction of D*+- mesons has been measured for photon-proton centre-of-mass energies in the range 130 < W < 280 GeV and a photon virtuality Q^2 < 1 GeV^2. The data sample used corresponds to an integrated luminosity of 37 pb^-1. Total and differential cross sections as functions of the D* transverse momentum and pseudorapidity are presented in restricted kinematical regions and the data are compared with next-to-leading order (NLO) perturbative QCD calculations using the "massive charm" and "massless charm" schemes. The measured cross sections are generally above the NLO calculations, in particular in the forward (proton) direction. The large data sample also allows the study of dijet production associated with charm. A significant resolved as well as a direct photon component contribute to the cross section. Leading order QCD Monte Carlo calculations indicate that the resolved contribution arises from a significant charm component in the photon. A massive charm NLO parton level calculation yields lower cross sections compared to the measured results in a kinematic region where the resolved photon contribution is significant.Comment: 32 pages including 6 figure

Measurement of the ratio of branching fractions BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma)

The ratio of branching fractions of the radiative B decays B0 -> K*0 gamma and Bs0 -> phi gamma has been measured using 0.37 fb-1 of pp collisions at a centre of mass energy of sqrt(s) = 7 TeV, collected by the LHCb experiment. The value obtained is BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma) = 1.12 +/- 0.08 ^{+0.06}_{-0.04} ^{+0.09}_{-0.08}, where the first uncertainty is statistical, the second systematic and the third is associated to the ratio of fragmentation fractions fs/fd. Using the world average for BR(B0 -> K*0 gamma) = (4.33 +/- 0.15) x 10^{-5}, the branching fraction BR(Bs0 -> phi gamma) is measured to be (3.9 +/- 0.5) x 10^{-5}, which is the most precise measurement to date.Comment: 15 pages, 1 figure, 2 table

Measurement of Jet Shapes in Photoproduction at HERA

The shape of jets produced in quasi-real photon-proton collisions at centre-of-mass energies in the range $134-277$ GeV has been measured using the hadronic energy flow. The measurement was done with the ZEUS detector at HERA. Jets are identified using a cone algorithm in the $\eta - \phi$ plane with a cone radius of one unit. Measured jet shapes both in inclusive jet and dijet production with transverse energies $E^{jet}_T>14$ GeV are presented. The jet shape broadens as the jet pseudorapidity ($\eta^{jet}$) increases and narrows as $E^{jet}_T$ increases. In dijet photoproduction, the jet shapes have been measured separately for samples dominated by resolved and by direct processes. Leading-logarithm parton-shower Monte Carlo calculations of resolved and direct processes describe well the measured jet shapes except for the inclusive production of jets with high $\eta^{jet}$ and low $E^{jet}_T$. The observed broadening of the jet shape as $\eta^{jet}$ increases is consistent with the predicted increase in the fraction of final state gluon jets.Comment: 29 pages including 9 figure

Measurement of the diffractive structure function in deep inelastic scattering at HERA

This paper presents an analysis of the inclusive properties of diffractive deep inelastic scattering events produced in $ep$ interactions at HERA. The events are characterised by a rapidity gap between the outgoing proton system and the remaining hadronic system. Inclusive distributions are presented and compared with Monte Carlo models for diffractive processes. The data are consistent with models where the pomeron structure function has a hard and a soft contribution. The diffractive structure function is measured as a function of \xpom, the momentum fraction lost by the proton, of $\beta$, the momentum fraction of the struck quark with respect to \xpom, and of $Q^2$. The \xpom dependence is consistent with the form \xpoma where $a~=~1.30~\pm~0.08~(stat)~^{+~0.08}_{-~0.14}~(sys)$ in all bins of $\beta$ and $Q^2$. In the measured $Q^2$ range, the diffractive structure function approximately scales with $Q^2$ at fixed $\beta$. In an Ingelman-Schlein type model, where commonly used pomeron flux factor normalisations are assumed, it is found that the quarks within the pomeron do not saturate the momentum sum rule.Comment: 36 pages, latex, 11 figures appended as uuencoded fil

Opposite-side flavour tagging of B mesons at the LHCb experiment

The calibration and performance of the oppositeside flavour tagging algorithms used for the measurements of time-dependent asymmetries at the LHCb experiment are described. The algorithms have been developed using simulated events and optimized and calibrated with B + →J/ψK +, B0 →J/ψK ∗0 and B0 →D ∗− μ + νμ decay modes with 0.37 fb−1 of data collected in pp collisions at √ s = 7 TeV during the 2011 physics run. The oppositeside tagging power is determined in the B + → J/ψK + channel to be (2.10 ± 0.08 ± 0.24) %, where the first uncertainty is statistical and the second is systematic

Search for CP violation in D+→K−K+π+D^{+} \to K^{-}K^{+}\pi^{+} decays

A model-independent search for direct CP violation in the Cabibbo suppressed decay $D^+ \to K^- K^+\pi^+$ in a sample of approximately 370,000 decays is carried out. The data were collected by the LHCb experiment in 2010 and correspond to an integrated luminosity of 35 pb$^{-1}$. The normalized Dalitz plot distributions for $D^+$ and $D^-$ are compared using four different binning schemes that are sensitive to different manifestations of CP violation. No evidence for CP asymmetry is found.Comment: 13 pages, 8 figures, submitted to Phys. Rev.

Observation of excited Lambda_b0 baryons

Using pp collision data corresponding to 1.0 fb-1 integrated luminosity collected by the LHCb detector, two narrow states are observed in the Lambda_b0pi+pi- spectrum with masses 5911.97 +- 0.12(stat) +- 0.02(syst) +- 0.66(Lambda_b0 mass) MeV/c^2 and 5919.77 +- 0.08(stat) +- 0.02(syst) +- 0.66(Lambda_b0 mass) MeV/c^2. The significances of the observations are 5.2 and 10.2 standard deviations, respectively. These states are interpreted as the orbitally-excited Lambda_b0 baryons, Lambda_b*0(5912) and Lambda_b*0(5920).Comment: Replaced by version published in Phys. Rev. Lett, modified fit with better mass resolution treatmen

Measurements of the branching fractions of the decays B°s → D∓s K± and B°s → D¯sπ+

The decay mode B°s → D∓s K± allows for one of the theoretically cleanest measurements of the CKM angle γ through the study of time-dependent CP violation. This paper reports a measurement of its branching fraction relative to the Cabibbo-favoured mode B°s → D¯sπ+ based on a data sample corresponding to 0.37 fb¯¹ of proton-proton collisions at √s = 7TeV collected in 2011 with the LHCb detector. In addition, the ratio of B meson production fractions fs/fd, determined from semileptonic decays, together with the known branching fraction of the control channel B°s → D¯sπ+ is used to perform an absolute measurement of the branching fractions: B(B°s → D¯sπ+) = (2.95 ± 0.05 ± 0.17 -0.22 +0.18) × 10¯³ ; B(B°s → D∓s K±) = (1.90 ± 0.12 ± 0.13 -0.14 +0.12) × 10¯4 ; where the first uncertainty is statistical, the second the experimental systematic uncertainty, and the third the uncertainty due to f s/f