The RMS Survey: Resolving kinematic distance ambiguities towards a sample of compact HII regions using HI absorption

We present high-resolution HI data obtained using the Australia Telescope Compact Array to resolve the near/far distance ambiguities towards a sample of compact HII regions from the Red MSX Source (RMS) survey. The high resolution data are complemented with lower resolution archival HI data extracted from the Southern and VLA Galactic Plane surveys. We resolve the distance ambiguity for nearly all of the 105 sources where the continuum was strong enough to allow analysis of the HI absorption line structure. This represents another step in the determination of distances to the total RMS sample, which with over 1,000 massive young stellar objects and compact HII regions, is the largest and most complete sample of its kind. The full sample will allow the distribution of massive star formation in the Galaxy to be examined.Comment: Accepted by MNRAS. This paper consists of 15 pages and contains 10 figures and 5 table

RISE: a fast-readout imager for exoplanet transit timing

By the precise timing of the low amplitude (0.005 - 0.02 magnitude) transits of exoplanets around their parent star it should be possible to infer the presence of other planetary bodies in the system down to Earth-like masses. We describe the design and construction of RISE, a fast-readout frame transfer camera for the Liverpool Telescope designed to carry out this experiment. The results of our commissioning tests are described as well as the data reduction procedure necessary. We present light curves of two objects, showing that the desired timing and photometric accuracy can be obtained providing that autoguiding is used to keep the target on the same detector pixel for the entire (typically 4 hour) observing run.Comment: Published in PROC SPIE, vol 7014, 70416

Progress on reducing acrylamide levels in potato crisps in Europe, 2002 to 2019

European Snacks Association (ESA) data on acrylamide in potato crisps from 2002 to 2019 (99704 observations) were analysed. Acrylamide levels have plateaued since 2011, although the lowest mean so far was attained in 2018 at 353 ± 2.7 ng g-1: a 54% reduction since 2002. The 85th, 90th and 95th quantiles did show evidence of continued downward progress, the 90th quantile being lower than the 750 ng g-1 European Benchmark Level from 2017 to 2019. A smaller dataset from the European Food Safety Authority (2124 observations) for 2011-2018, was also analysed. The yearly means were higher than those of the ESA data, but showed a fall in average acrylamide from 715 ± 40.5 ng g-1 in 2015 to 505 ±28.5 ng g-1 in 2018, as well as steep falls in the 85th, 90th and 95th quantiles. Nevertheless, even the 85th quantile remained above the 750 ng g-1 Benchmark Level. The ESA data showed a reduction in the proportion of samples with acrylamide exceeding 750 ng g-1, from over 40 % in 2002 to 7.75 % in 2019. Seasonality was evident, with highest acrylamide levels from November to May. Crisp type had little effect except that thicker types had a higher proportion of samples containing >750 ng g-1 acrylamide. Analysis of the region of origin in Europe of the final product revealed improvements in the east and north. Geographical factors combined with seasonality continued to be problematic but was also an aspect in which progress was most evident. The findings show that improvements have been made in reducing the number of samples with very high levels of acrylamide, but do not suggest that mean acrylamide levels could be reduced substantially below where they have been since 2011, or that levels could be kept consistently below the current Benchmark Level

The RMS Survey: Far-Infrared Photometry of Young Massive Stars

Context: The Red MSX Source (RMS) survey is a multi-wavelength campaign of follow-up observations of a colour-selected sample of candidate massive young stellar objects (MYSOs) in the galactic plane. This survey is returning the largest well-selected sample of MYSOs to date, while identifying other dust contaminant sources with similar mid-infrared colours including a large number of new ultra-compact (UC)HII regions. Aims:To measure the far-infrared (IR) flux, which lies near the peak of the spectral energy distribution (SED) of MYSOs and UCHII regions, so that, together with distance information, the luminosity of these sources can be obtained. Methods:Less than 50% of RMS sources are associated with IRAS point sources with detections at 60 micron and 100 micron, though the vast majority are visible in Spitzer MIPSGAL or IRAS Galaxy Atlas (IGA) images. However, standard aperture photometry is not appropriate for these data due to crowding of sources and strong spatially variable far-IR background emission in the galactic plane. A new technique using a 2-dimensional fit to the background in an annulus around each source is therefore used to obtain far-IR photometry for young RMS sources. Results:Far-IR fluxes are obtained for a total of 1113 RMS candidates identified as young sources. Of these 734 have flux measurements using IGA 60 micron and 100 micron images and 724 using MIPSGAL 70 micron images, with 345 having measurements in both data sets.Comment: 10 pages, 10 figures, 2 Tables, accepted to A&A. A full version of table 1 is available from the lead author or at the CDS upon publicatio

The RMS Survey: The Bolometric Fluxes and Luminosity Distributions of Young Massive Stars

Context: The Red MSX Source (RMS) survey is returning a large sample of massive young stellar objects (MYSOs) and ultra-compact (UC) \HII{} regions using follow-up observations of colour-selected candidates from the MSX point source catalogue. Aims: To obtain the bolometric fluxes and, using kinematic distance information, the luminosities for young RMS sources with far-infrared fluxes. Methods: We use a model spectral energy distribution (SED) fitter to obtain the bolometric flux for our sources, given flux data from our work and the literature. The inputs to the model fitter were optimised by a series of investigations designed to reveal the effect varying these inputs had on the resulting bolometric flux. Kinematic distances derived from molecular line observations were then used to calculate the luminosity of each source. Results: Bolometric fluxes are obtained for 1173 young RMS sources, of which 1069 have uniquely constrained kinematic distances and good SED fits. A comparison of the bolometric fluxes obtained using SED fitting with trapezium rule integration and two component greybody fits was also undertaken, and showed that both produce considerable scatter compared to the method used here. Conclusions: The bolometric flux results allowed us to obtain the luminosity distributions of YSOs and UC\HII{} regions in the RMS sample, which we find to be different. We also find that there are few MYSOs with L $\geq$ 10$^{5}$\lsol{}, despite finding many MYSOs with 10$^{4}$\lsol{} $\geq$ L $\geq$ 10$^{5}$\lsol{}.Comment: 12 pages, 12 figures, 3 tables, accepted to A&A. The full versions of tables 1 and 2 will be available via the CDS upon publicatio

The RMS Survey: Ammonia and water maser analysis of massive star forming regions

The Red MSX Source (RMS) survey has identified a sample of ~1200 massive young stellar objects (MYSOs), compact and ultra compact HII regions from a sample of ~2000 MSX and 2MASS colour selected sources. We have used the 100 m Green Bank telescope to search for 22-24 GHz water maser and ammonia (1,1), (2,2) and (3,3) emission towards ~600 RMS sources located within the northern Galactic plane. We have identified 308 H2O masers which corresponds to an overall detection rate of ~50%. Abridged: We detect ammonia emission towards 479 of these massive young stars, which corresponds to ~80%. Ammonia is an excellent probe of high density gas allowing us to measure key parameters such as gas temperatures, opacities, and column densities, as well as providing an insight into the gas kinematics. The average kinetic temperature, FWHM line width and total NH3 column density for the sample are approximately 22 K, 2 km/s and 2x10^{15} cm^{-2}, respectively. We find that the NH3 (1,1) line width and kinetic temperature are correlated with luminosity and finding no underlying dependence of these parameters on the evolutionary phase of the embedded sources, we conclude that the observed trends in the derived parameters are more likely to be due to the energy output of the central source and/or the line width-clump mass relationship. The velocities of the peak H2O masers and the NH3 emission are in excellent agreement with each other, which would strongly suggest an association between the dense gas and the maser emission. Moreover, we find the bolometric luminosity of the embedded source and the isotropic luminosity of the H2O maser are also correlated. We conclude from the correlations of the cloud and water maser velocities and the bolometric and maser luminosity that there is a strong dynamical relationship between the embedded young massive star and the H2O maser.Comment: 17 pages and 17 figures and 8 tables. Tables\,2 and 5 and full versions of Figs. 3 and 7 are only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.125.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A

Transient flow-driven distortion of a nematic liquid crystal in channel flow with dissipative weak planar anchoring

Motivated by the one-drop-filling (ODF) method for the industrial manufacturing of liquid crystal displays, we analyze the pressure-driven flow of a nematic in a channel with dissipative weak planar anchoring at the boundaries of the channel. We obtain quasisteady asymptotic solutions for the director angle and the velocity in the limit of small Leslie angle, in which case the key parameters are the Ericksen number and the anchoring strength parameter. In the limit of large Ericksen number, the solution for the director angle has narrow reorientational boundary layers and a narrow reorientational internal layer separated by two outer regions in which the director is aligned at the positive Leslie angle in the lower half of the channel and the negative Leslie angle in the upper half of the channel. On the other hand, in the limit of small Ericksen number, the solution for the director angle is dominated by splay elastic effects with viscous effects appearing at first order. As the Ericksen number varies, there is a continuous transition between these asymptotic behaviors, and in fact the two asymptotic solutions capture the behavior rather well for all values of the Ericksen number. The steady-state value of the director angle at the boundaries and the timescale of the evolution toward this steady-state value in the asymptotic limits of large and small Ericksen number are determined. In particular, using estimated parameter values for the ODF method, it is found that the boundary director rotation timescale is substantially shorter than the timescale of the ODF method, suggesting that there is sufficient time for significant transient flow-driven distortion of the nematic molecules at the substrates from their required orientation to occur

The JCMT Gould Belt Survey: a quantitative comparison between SCUBA-2 data reduction methods

Performing ground-based submillimetre observations is a difficult task as the measurements are subject to absorption and emission from water vapour in the Earth's atmosphere and time variation in weather and instrument stability. Removing these features and other artefacts from the data is a vital process which affects the characteristics of the recovered astronomical structure we seek to study. In this paper, we explore two data reduction methods for data taken with the Submillimetre Common-User Bolometer Array-2 (SCUBA-2) at the James Clerk Maxwell Telescope (JCMT). The JCMT Legacy Reduction 1 (JCMT LR1) and The Gould Belt Legacy Survey Legacy Release 1 (GBS LR1) reduction both use the same software (starlink) but differ in their choice of data reduction parameters. We find that the JCMT LR1 reduction is suitable for determining whether or not compact emission is present in a given region and the GBS LR1 reduction is tuned in a robust way to uncover more extended emission, which better serves more in-depth physical analyses of star-forming regions. Using the GBS LR1 method, we find that compact sources are recovered well, even at a peak brightness of only three times the noise, whereas the reconstruction of larger objects requires much care when drawing boundaries around the expected astronomical signal in the data reduction process. Incorrect boundaries can lead to false structure identification or it can cause structure to be missed. In the JCMT LR1 reduction, the extent of the true structure of objects larger than a point source is never fully recovered