950 research outputs found
Stability of Relativistic Matter with Magnetic Fields for Nuclear Charges up to the Critical Value
We give a proof of stability of relativistic matter with magnetic fields all
the way up to the critical value of the nuclear charge .Comment: LaTeX2e, 12 page
Spatio-temporal variability of the North Sea cod recruitment in relation to temperature and zooplankton
The North Sea cod (Gadus morhua, L.) stock has continuously declined over the past four decades linked with overfishing
and climate change. Changes in stock structure due to overfishing have made the stock largely dependent on its
recruitment success, which greatly relies on environmental conditions. Here we focus on the spatio-temporal variability of
cod recruitment in an effort to detect changes during the critical early life stages. Using International Bottom Trawl Survey
(IBTS) data from 1974 to 2011, a major spatio-temporal change in the distribution of cod recruits was identified in the late
1990s, characterized by a pronounced decrease in the central and southeastern North Sea stock. Other minor spatial
changes were also recorded in the mid-1980s and early 1990s. We tested whether the observed changes in recruits
distribution could be related with direct (i.e. temperature) and/or indirect (i.e. changes in the quantity and quality of
zooplankton prey) effects of climate variability. The analyses were based on spatially-resolved time series, i.e. sea surface
temperature (SST) from the Hadley Center and zooplankton records from the Continuous Plankton Recorder Survey. We
showed that spring SST increase was the main driver for the most recent decrease in cod recruitment. The late 1990s were
also characterized by relatively low total zooplankton biomass, particularly of energy-rich zooplankton such as the copepod
Calanus finmarchicus
, which have further contributed to the decline of North Sea cod recruitment. Long-term spatially-
resolved observations were used to produce regional distribution models that could further be used to predict the
abundance of North Sea cod recruits based on temperature and zooplankton food availability.Publicado
SIMULATIONS AND MEASUREMENTS OF THE PRE-ARCING TIMES IN HBC FUSES UNDER TYPICAL ELECTRIC FAULTS
International audienceThis work deals with the comparison between calculations and measurements of pre-arcing times in High Breaking Capacity fuses under typical fault current conditions. This paper also describes the temperature evolution and the Joule energy dissipated in a fuse element during the pre-arcing time. By varying typical electrical parameters, namely the closing angle and the power factor, we show that various prospective currents such as those observed in industrial case can be fairly simulated. The pre-arcing time and then the clearing of the fault current are shown to be deeply dependent on these electrical characteristics. We exhibit simulated results of prospective current and supply voltage waves for given closing angles under two typical power factors which are compared with the experimental ones. A comparison between simulated pre-arcing times with experimental ones shows some discrepancies and a discussion on the numerical assumptions is made
Recommended from our members
Cold desert weathering effects on magnetic properties of L6 chondrites
Antarctic weathering of ordinary chondrites primarily affects Fe-Ni metals which are the main magnetic minerals of the meteorites. The magnetic properties of meteorites can thus be used as proxies to weathering state. The alteration products resulting from oxidation and weathering of the metals can also have magnetic properties of their own. However, the mode of weathering that operates in different environments varies, as do the products. As such, understanding how the magnetic properties are affected in Antarctica is important to recognize and understand
Global Research Alliance N2O chamber methodology guidelines: Recommendations for deployment and accounting for sources of variability
Adequately estimating soil nitrous oxide (N2O) emissions using static chambers is challenging due to the high spatial variability and episodic nature of these fluxes. This paper discusses how static chamber N2O experiments can be designed, and protocols implemented, to better account for this variability and reduce the uncertainty of N2O emission estimates. It is part of a series of papers in this special issue, each discussing a particular aspect of N2O chamber methodology. Aspects of experimental design and sampling affected by spatial variability include site selection, and chamber layout, size and areal coverage. Where used, treatment application adds a further level of spatial variability. Time of day, frequency and duration of sampling (both in terms of individual chamber closures and overall experiment duration) affect the temporal variability captured. In addition, we present best practice recommendations for experimental chamber installation and sampling protocols to minimise the introduction of further uncertainty. To obtain the best N2O emission estimates, resources should be allocated to minimise the overall uncertainty in line with experiment objectives. In some cases, this will mean prioritising individual flux measurements and increasing their accuracy and precision by, for example, collecting ≥4 headspace samples during each chamber closure. However, where N2O fluxes are exceptionally spatially variable, for example, in heterogeneous agricultural landscapes, such as uneven and woody grazed pastures, using available resources to deploy more chambers with fewer headspace samples per chamber may be beneficial. Similarly, for particularly episodic N2O fluxes, generated for example by irrigation or freeze-thaw cycles, increasing chamber sampling frequency will improve the accuracy and reduce the uncertainty of temporally interpolated N2O fluxe
Self-phase modulation-based integrated optical regeneration in chalcogenide waveguides
Copyright © 2006 IEEEWe demonstrate integrated all-optical 2R regenerators based on Kerr optical nonlinearities (subpicosecond response) in chalcogenide glass waveguides with integrated Bragg grating filters. By combining a low loss As₂S₃ rib waveguide with an in-waveguide photo-written Bragg grating filter, we realize an integrated all-optical 2R signal regenerator with the potential to process bit rates in excess of 1 Tb/s. The device operates using a combination of self phase modulation induced spectral broadening followed by a linear filter offset from the input centerwavelength.A nonlinear power transfer curve is demonstrated using 1.4 ps pulses, sufficient for suppressing noise in an amplified transmission link. We investigate the role of dispersion on the device transfer characteristics, and discuss future avenues to realizing a device capable of operation at subwatt peak power levels.Vahid G. Ta’eed, Mehrdad Shokooh-Saremi, Libin Fu, Ian C. M. Littler, David J. Moss, Martin Rochette, Benjamin J. Eggleton, Yinlan Ruan, and Barry Luther-Davie
Novel synchronous DPSK optical regenerator based on a feed-forward based carrier extraction scheme
We experimentally demonstrate a novel synchronous 10.66Gbit/s DPSK OEO regenerator which uses a feed-forward carrier extraction scheme with an injection-locked laser to synchronize the regenerated signal wavelength to the incoming signal wavelength. After injection-locking, a low-cost DFB laser used at the regenerator exhibited the same linewidth characteristics as the narrow line-width transmitter laser. The phase regeneration properties of the regenerator were evaluated by emulating random Gaussian phase noise applied to the DPSK signal before the regenerator using a phase modulator driven by an arbitrary waveform generator. The overall performance was evaluated in terms of electrical eye-diagrams, BER measurements, and constellation diagrams
Global Research Alliance N2O chamber methodology guidelines: Design considerations
Terrestrial ecosystems, both natural ecosystems and agroecosystems, generate greenhouse gases (GHGs). The chamber method is the most common method to quantify GHG fluxes from soil–plant systems and to better understand factors affecting their generation and mitigation. The objective of this study was to review and synthesize literature on chamber designs (non‐flow‐through, non‐steady‐state chamber) and associated factors that affect GHG nitrous oxide (N2O) flux measurement when using chamber methods. Chamber design requires consideration of many facets that include materials, insulation, sealing, venting, depth of placement, and the need to maintain plant growth and activity. Final designs should be tailored, and bench tested, in order to meet the nuances of the experimental objectives and the ecosystem under study while reducing potential artifacts. Good insulation, to prevent temperature fluctuations and pressure changes, and a high‐quality seal between base and chamber are essential. Elimination of pressure differentials between headspace and atmosphere through venting should be performed, and designs now exist to eliminate Venturi effects of earlier tube‐type vent designs. The use of fans within the chamber headspace increases measurement precision but may alter the flux. To establish best practice recommendations when using fans, further data are required, particularly in systems containing tall plants, to systematically evaluate the effects that fan speed, position, and mixing rate have on soil gas flux.Peer reviewe
- …