Brewster-angle measurements of sea-surface reflectance using a high resolution spectroradiometer

This paper describes the design, construction and testing of a ship-borne spectroradiometer based on an imaging spectrograph and cooled CCD array with a wavelength range of 350-800 nm and 4 nm spectral sampling. The instrument had a minimum spectral acquisition time of 0.1 s, but in practice data were collected over periods of 10 s to allow averaging of wave effects. It was mounted on a ship's superstructure so that it viewed the sea surface from a height of several metres at the Brewster angle (53 degrees) through a linear polarizing filter. Comparison of sea-leaving spectra acquired with the polarizer oriented horizontally and vertically enabled estimation of the spectral composition of sky light reflected directly from the sea surface. A semi-empirical correction procedure was devised for retrieving water-leaving radiance spectra from these measurements while minimizing the influence of reflected sky light. Sea trials indicated that reflectance spectra obtained by this method were consistent with the results of radiance transfer modelling of case 2 waters with similar concentrations of chlorophyll and coloured dissolved organic matter. Surface reflectance signatures measured at three locations containing blooms of different phytoplankton species were easily discriminated and the instrument was sufficiently sensitive to detect solar-stimulated fluorescence from surface chlorophyll concentrations down to 1 mg m−3

FU Orionis resolved by infrared long baseline interferometry at a 2-AU scale

We present the first infrared interferometric observations of a young stellar object with a spatial projected resolution better than 2 AU. The observations were obtained with the Palomar Testbed Interferometer. FU Ori exhibits a visibility of V^2 =0.72 +/- 0.07 for a 103 +/- 5 m projected baseline at lambda = 2.2 microns. The data are consistent on the spatial scale probed by PTI both with a binary system scenario (maximum magnitude difference of 2.7 +/- 0.5 mag and smallest separation of 0.35 +/- 0.05 AU) and a standard luminous accretion disk model (approx. accretion rate of 6e-5 Mo/yr) where the thermal emission dominates the stellar scattering, and inconsistent with a single stellar photosphere.Comment: 13 pages, 4 figures, accepted for publication in ApJ

Low Density Supersonic Decelerator (LDSD) Supersonic Flight Dynamics Test (SFDT) Plume Induced Environment Modelling

Provide plume induced heating (radiation & convection) predictions in support of the LDSD thermal design (pre-flight SFDT-1) Predict plume induced aerodynamics in support of flight dynamics, to achieve targeted freestream conditions to test supersonic deceleration technologies (post-flight SFDT-1, pre-flight SFDT-2

Average seasonal changes in chlorophyll a in Icelandic waters

The standard algorithms used to derive sea surface chlorophyll a concentration from remotely sensed ocean colour data are based almost entirely on the measurements of surface water samples collected in open sea (case 1) waters which cover ~60% of the worlds oceans, where strong correlations between reflectance and chlorophyll concentration have been found. However, satellite chlorophyll data for waters outside the defined case 1 areas, but derived using standard calibrations, are frequently used without reference to local in situ measurements and despite well-known factors likely to lead to inaccuracy. In Icelandic waters, multiannual averages of 8-d composites of SeaWiFS chlorophyll concentration accounted for just 20% of the variance in a multiannual dataset of in situ chlorophyll a measurements. Nevertheless, applying penalized regression spline methodology to model the spatial and temporal patterns of in situ measurements, using satellite chlorophyll as one of the predictor variables, improved the correlation considerably. Day number, representing seasonal variation, accounted for substantial deviation between SeaWiFS and in situ estimates of surface chlorophyll. The final model, using bottom depth and bearing to the sampling location as well as the two variables mentioned above, explained 49% of the variance in the fitting dataset

Performance and Radiation Testing of a Low-Noise Switched Capacitor Array for the CMS Endcap Muon System.

The 16-channel, 96-cell per channel switched capacitor array ( SCA) ASIC developed at UC Davis for the cathode readout of the cathode strip chambers ( CSC) in the CMS endcap muon system is ready for production. For the final full-sized prototype, the Address Decoder was re-designed and LVDS receivers were incorporated into the chip package. Under precision testing, the chip exhibits excellent linearity within the 1V design range and very low cell-to-cell pedestal variation. Monitored samples of the production design were subjected to exposure to a 63.3 MeV proton beam. The performance of chips after exposures up to 100 krad was within tolerances of an unexposed part

Hysteresis loops of Co-Pt perpendicular magnetic multilayers

We develop a phenomenological model to study magnetic hysteresis in two samples designed as possible perpendicular recording media. A stochastic cellular automata model captures cooperative behavior in the nucleation of magnetic domains. We show how this simple model turns broad hysteresis loops into loops with sharp drops like those observed in these samples, and explains their unusual features. We also present, and experimentally verify, predictions of this model, and suggest how insights from this model may apply more generally.Comment: 4.5 pages, 5 figure

The Palomar Testbed Interferometer

The Palomar Testbed Interferometer (PTI) is a long-baseline infrared interferometer located at Palomar Observatory, California. It was built as a testbed for interferometric techniques applicable to the Keck Interferometer. First fringes were obtained in July 1995. PTI implements a dual-star architecture, tracking two stars simultaneously for phase referencing and narrow-angle astrometry. The three fixed 40-cm apertures can be combined pair-wise to provide baselines to 110 m. The interferometer actively tracks the white-light fringe using an array detector at 2.2 um and active delay lines with a range of +/- 38 m. Laser metrology of the delay lines allows for servo control, and laser metrology of the complete optical path enables narrow-angle astrometric measurements. The instrument is highly automated, using a multiprocessing computer system for instrument control and sequencing.Comment: ApJ in Press (Jan 99) Fig 1 available from http://huey.jpl.nasa.gov/~bode/ptiPicture.html, revised duging copy edi

Актуальність впровадження систем газового обліку в сучасних умовах

Free energy calculation has long been an important goal for molecular dynamics simulation and force field development, but historically it has been challenged by limited performance, accuracy, and creation of topologies for arbitrary small molecules. This has made it difficult to systematically compare different sets of parameters to improve existing force fields, but in the past few years several authors have developed increasingly automated procedures to generate parameters for force fields such as Amber, CHARMM, and OPLS. Here, we present a new framework that enables fully automated generation of GROMACS topologies for any of these force fields and an automated setup for parallel adaptive optimization of high-throughput free energy calculation by adjusting lambda point placement on the fly. As a small example of this automated pipeline, we have calculated solvation free energies of 50 different small molecules using the GAFF, OPLS-AA, and CGenFF force fields and four different water models, and by including the often neglected polarization costs, we show that the common charge models are somewhat underpolarized.QC 20150505</p

A quasi-experimental study to mobilize rural low-income communities to assess and improve the ecological environment to prevent childhood obesity

Citation: Peters, P., Gold, A., Abbott, A., Contreras, D., Keim, A., Oscarson, R., . . . Mobley, A. R. (2016). A quasi-experimental study to mobilize rural low-income communities to assess and improve the ecological environment to prevent childhood obesity. Bmc Public Health, 16, 7. doi:10.1186/s12889-016-3047-4Background: The Ecological Model of Childhood Overweight focuses on characteristics that could affect a child's weight status in relation to the multiple environments surrounding that child. A community coaching approach allows community groups to identify their own strengths, priorities and identity. Little to no research currently exists related to community-based efforts inclusive of community coaching in creating environmental change to prevent childhood obesity particularly in rural communities. Methods: A quasi-experimental study will be conducted with low-income, rural communities (n = 14) in the North Central region of the United States to mobilize capacity in communities to create and sustain an environment of healthy eating and physical activity to prevent childhood obesity. Two rural communities within seven Midwestern states (IN, KS, MI, OH, ND, SD, WI) will be randomly assigned to serve as an intervention or comparison community. Coalitions will complete assessments of their communities, choose from evidence-based approaches, and implement nutrition and physical activity interventions each year to prevent childhood obesity with emphasis on policy, system or environmental changes over four years. Only intervention coalitions will receive community coaching from a trained coach. Outcomes will be assessed at baseline, annually and project end using previously validated instruments and include coalition self-assessments, parental perceptions regarding the built environment, community, neighborhood, and early childhood environments, self-reflections from coaches and project staff, ripple effect mapping with coalitions and, final interviews of key stakeholders and coaches. A mixed-methods analysis approach will be used to evaluate if Community Coaching enhances community capacity to create and sustain an environment to support healthy eating and physical activity for young children. ANOVA or corresponding non-parametric tests will be used to analyze quantitative data relating to environmental change with significance set at P < .05. Dominant emergent themes from the qualitative data will be weaved together with quantitative data to develop a theoretical model representing how communities were impacted by the project. Discussion: This project will yield data and best practices that could become a model for community development based approaches to preventing childhood obesity in rural communities

Satellite estimates of wide-range suspended sediment concentrations in Changjiang (Yangtze) estuary using MERIS data

The Changjiang (Yangtze) estuarine and coastal waters are characterized by suspended sediments over a wide range of concentrations from 20 to 2,500 mg l-1. Suspended sediment plays important roles in the estuarine and coastal system and environment. Previous algorithms for satellite estimates of suspended sediment concentration (SSC) showed a great limitation in that only low to moderate concentrations (up to 50 mg l-1) could be reliably estimated. In this study, we developed a semi-empirical radiative transfer (SERT) model with physically based empirical coefficients to estimate SSC from MERIS data over turbid waters with a much wider range of SSC. The model was based on the Kubelka–Munk two-stream approximation of radiative transfer theory and calibrated using datasets from in situ measurements and outdoor controlled tank experiments. The results show that the sensitivity and saturation level of remote-sensing reflectance to SSC are dependent on wavelengths and SSC levels. Therefore, the SERT model, coupled with a multi-conditional algorithm scheme adapted to satellite retrieval of wide-range SSC, was proposed. Results suggest that this method is more effective and accurate in the estimation of SSC over turbid water