System for Centering a Turbofan in a Nacelle During Tests

A feedback position-control system has been developed for maintaining the concentricity of a turbofan with respect to a nacelle during acoustic and flow tests in a wind tunnel. The system is needed for the following reasons: Thermal and thrust loads can displace the fan relative to the nacelle; In the particular test apparatus (see Figure 1), denoted as a rotor-only nacelle (RAN), the struts, vanes, and other stator components of a turbofan engine that ordinarily maintain the required concentricity in the face of thermal and thrust loads are not present; and The struts and stator components are not present because it is necessary to provide a flow path that is acoustically clean in the sense that the measured noise can be attributed to the fan alone. The system is depicted schematically in Figure 2. The nacelle is supported by two struts attached to a two-axis traverse table located outside the wind-tunnel wall. Two servomotors acting through 100:1 gearboxes drive the table along the Y and Z axes, which are perpendicular to the axis of rotation. The Y and Z components of the deviation from concentricity are measured by four laser displacement sensors mounted on the nacelle and aimed at reflective targets on the center body, which is part of the fan assembly. The outputs of the laser displacement sensors are digitized and processed through a personal computer programmed with control software. The control output of the computer commands the servomotors to move the table as needed to restore concentricity. Numerous software and hardware travel limits and alarms are provided to maximize safety. A highly ablative rub strip in the nacelle minimizes the probability of damage in the event that a deviation from concentricity exceeds the radial clearance [<0.004 in. (<0.1 mm)] between the inner surface of the nacelle and the tips of the fan blades. To be able to prevent an excursion in excess of the tip clearance, the system must be accurate enough to control X and Y displacements to within 0.001 in. (.0.025 mm). One characteristic essential to such accuracy is sufficient rigidity in the mechanical components of the system to prevent excitation of vibrations in the strut/ nacelle subsystem. The need for such a high degree of accuracy prompted a comprehensive analysis of sources of measurement and control errors, followed by rigorous design efforts to minimize these errors. As a result, the design of the system incorporates numerous improvements in hardware, software, and operational procedures

Transcriptomes of parents identify parenting strategies and sexual conflict in a subsocial beetle

This work was funded by UK NERC grants to M.G.R. and A.J.M. an NERC studentship to D.J.P. the University of Georgia and a US NSF grant to A.J.M. and M.G.R.Parenting in the burying beetle Nicrophorus vespilloides is complex and, unusually, the sex and number of parents that can be present is flexible. Such flexibility is expected to involve specialized behaviour by the two sexes under biparental conditions. Here, we show that offspring fare equally well regardless of the sex or number of parents present. Comparing transcriptomes, we find a largely overlapping set of differentially expressed genes in both uniparental and biparental females and in uniparental males including vitellogenin, associated with reproduction, and takeout, influencing sex-specific mating and feeding behaviour. Gene expression in biparental males is similar to that in non-caring states. Thus, being ‘biparental’ in N. vespilloides describes the family social organization rather than the number of directly parenting individuals. There was no specialization; instead, in biparental families, direct male parental care appears to be limited with female behaviour unchanged. This should lead to strong sexual conflict.Publisher PDFPeer reviewe

Uptake, Distribution and Diffusivity of Reactive Fluorophores in Cells: Implications Toward Target Identification

There is much recent interest in the application of copper-free click chemistry to study a wide range of biological events in vivo and in vitro. Specifically, azide-conjugated fluorescent probes can be used to identify targets which have been modified with bioorthogonal reactive groups. For intracellular applications of this chemistry, the structural and physicochemical properties of the fluorescent azide become increasingly important. Ideal fluorophores should extensively accumulate within cells, have even intracellular distribution, and be free (unbound), allowing them to efficiently participate in bimolecular reactions. We report here on the synthesis and evaluation a set of structurally diverse fluorescent probes to examine their potential usefulness in intracellular click reactions. Total cellular uptake and intracellular distribution profiles were comparatively assessed using both quantitative and qualitative approaches. The intracellular diffusion coefficients were measured using a fluorescence recovery after photobleaching (FRAP)-based method. Many reactive fluorophores exhibited suboptimal properties for intracellular reactions. BODIPY- and TAMRA-based azides had superior cellular accumulation, whereas TAMRA-based probes had the most uniform intracellular distribution and best cytosolic diffusivity. Collectively, these results provide an unbiased comparative evaluation regarding the suitability of azide-linked fluorophores for intracellular click reactions

Two-sided combinatorial volume bounds for non-obtuse hyperbolic polyhedra

We give a method for computing upper and lower bounds for the volume of a non-obtuse hyperbolic polyhedron in terms of the combinatorics of the 1-skeleton. We introduce an algorithm that detects the geometric decomposition of good 3-orbifolds with planar singular locus and underlying manifold the 3-sphere. The volume bounds follow from techniques related to the proof of Thurston's Orbifold Theorem, Schl\"afli's formula, and previous results of the author giving volume bounds for right-angled hyperbolic polyhedra.Comment: 36 pages, 19 figure

Performance on Indirect Measures of Race Evaluation Predicts Amygdala Activation

We used fMRI to explore the neural substrates involved in the unconscious evaluation of Black and White social groups. Specifically, we focused on the amygdala, a subcortical structure known to play a role in emotional learning and evaluation. In Experiment 1, White American subjects observed faces of unfamiliar Black and White males. The strength of amygdala activation to Black-versus-White faces was correlated with two indirect (unconscious) measures of race evaluation (Implicit Association Test [IAT] and potentiated startle), but not with the direct (conscious) expression of race attitudes. In Experiment 2, these patterns were not obtained when the stimulus faces belonged to familiar and positively regarded Black and White individuals. Together, these results suggest that amygdala and behavioral responses to Black-versus-White faces in White subjects reflect cultural evaluations of social groups modified by individual experience.Psycholog

Opioid Receptor Probes Derived from Cycloaddition of the Hallucinogen Natural Product Salvinorin A

As part of our continuing efforts toward more fully understanding the structure−activity relationships of the neoclerodane diterpene salvinorin A, we report the synthesis and biological characterization of unique cycloadducts through [4+2] Diels−Alder cycloaddition. Microwave-assisted methods were developed and successfully employed, aiding in functionalizing the chemically sensitive salvinorin A scaffold. This demonstrates the first reported results for both cycloaddition of the furan ring and functionalization via microwave-assisted methodology of the salvinorin A skeleton. The cycloadducts yielded herein introduce electron-withdrawing substituents and bulky aromatic groups into the C-12 position. Kappa opioid (KOP) receptor space was explored through aromatization of the bent oxanorbornadiene system possessed by the cycloadducts to a planar phenyl ring system. Although dimethyl- and diethylcarboxylate analogues 5 and 6 retain some affinity and selectivity for KOP receptors and are full agonists, their aromatized counterparts 13 and 14 have reduced affinity for KOP receptors. The methods developed herein signify a novel approach toward rapidly probing the structure−activity relationships of furan-containing natural products

Zika virus tropism and interactions in myelinating neural cell cultures: CNS cells and myelin are preferentially affected

The recent global outbreak of Zika virus (ZIKV) infection has been linked to severe neurological disorders affecting the peripheral and central nervous systems (PNS and CNS, respectively). The pathobiology underlying these diverse clinical phenotypes are the subject of intense research; however, even the principal neural cell types vulnerable to productive Zika infection remain poorly characterised. Here we used CNS and PNS myelinating cultures from wild type and Ifnar1 knockout mice to examine neuronal and glial tropism and short-term consequences of direct infection with a Brazilian variant of ZIKV. Cell cultures were infected pre- or post-myelination for various intervals, then stained with cell-type and ZIKV-specific antibodies. In bypassing systemic immunity using ex vivo culture, and the type I interferon response in Ifnar1 deficient cells, we were able to evaluate the intrinsic infectivity of neural cells. Through systematic quantification of ZIKV infected cells in myelinating cultures, we found that ZIKV infection is enhanced in the absence of the type I interferon responses and that CNS cells are considerably more susceptible to infection than PNS cells. In particular, we demonstrate that CNS axons and myelinating oligodendrocytes are especially vulnerable to injury. These results have implications for understanding the pathobiology of neurological symptoms associated with ZIKV infection. Furthermore, we provide a quantifiable ex vivo infection model that can be used for fundamental and therapeutic studies on viral neuroinvasion and its consequences

The role of leadership in implementing lean manufacturing

It is widely accepted that for the successful implementation of lean manufacturing, the senior management commitment is of great importance. However, the lean journey is usually a long one, and eventually management commitment creeps. Furthermore, the involvement of employees in daily improvements is also critical for the success of implementation. Lean leadership can be considered as a way of sustaining and improving the employee performance in lean production systems. In the present study, a thorough literature review is presented focusing in reviewing the principles of lean leadership and the practices that can lead in improving the employee performance. Furthermore, the characteristics and qualities of lean leader are discussed Paper originally presented at Manufacturing Systems 4.0 – Proceedings of the 50th CIRP Conference on Manufacturing Systems, held 3 – 5 May, 2017, Taichung City, Taiwan