709 research outputs found

    Comparison of forest attributes derived from two terrestrial lidar systems.

    Get PDF
    Abstract Terrestrial lidar (TLS) is an emerging technology for deriving forest attributes, including conventional inventory and canopy characterizations. However, little is known about the influence of scanner specifications on derived forest parameters. We compared two TLS systems at two sites in British Columbia. Common scanning benchmarks and identical algorithms were used to obtain estimates of tree diameter, position, and canopy characteristics. Visualization of range images and point clouds showed clear differences, even though both scanners were relatively high-resolution instruments. These translated into quantifiable differences in impulse penetration, characterization of stems and crowns far from the scan location, and gap fraction. Differences between scanners in estimates of effective plant area index were greater than differences between sites. Both scanners provided a detailed digital model of forest structure, and gross structural characterizations (including crown dimensions and position) were relatively robust; but comparison of canopy density metrics may require consideration of scanner attributes

    Carbon Sequestration in Managed Temperate Coniferous Forests Under Climate Change

    Get PDF
    Management of temperate forests has the potential to increase carbon sinks and mitigate climate change. However, those opportunities may be confounded by negative climate change impacts. We therefore need a better understanding of climate change alterations to temperate forest carbon dynamics before developing mitigation strategies. The purpose of this project was to investigate the interactions of species composition, fire, management, and climate change in the Copper–Pine Creek valley, a temperate coniferous forest with a wide range of growing conditions. To do so, we used the LANDIS-II modelling framework including the new Forest Carbon Succession extension to simulate forest ecosystems under four different productivity scenarios, with and without climate change effects, until 2050. Significantly, the new extension allowed us to calculate the net sector productivity, a carbon accounting metric that integrates aboveground and belowground carbon dynamics, disturbances, and the eventual fate of forest products. The model output was validated against literature values. The results implied that the species optimum growing conditions relative to current and future conditions strongly influenced future carbon dynamics. Warmer growing conditions led to increased carbon sinks and storage in the colder and wetter ecoregions but not necessarily in the others. Climate change impacts varied among species and site conditions, and this indicates that both of these components need to be taken into account when considering climate change mitigation activities and adaptive management. The introduction of a new carbon indicator, net sector productivity, promises to be useful in assessing management effectiveness and mitigation activities

    Managing understory light conditions in boreal mixedwoods through variation in the intensity and spatial pattern of harvest: A modelling approach

    Get PDF
    In the context of partial harvesting, adequately managing post-harvest light conditions are essential to obtain a desired composition of tree species regeneration. The objective of this study was to determine how varying the intensity and spatial pattern of harvest would affect understory light conditions in boreal mixedwood stands of northwestern Quebec using the spatially explicit SORTIE-ND light model. The model was evaluated based on comparisons of observed and predicted light levels in both mapped and un-mapped plots. In mapped plots, reasonably accurate predictions of the overall variation in light levels were obtained, but predictions tended to lack spatial precision. In un-mapped plots, SORTIE-ND accurately predicted stand-level mean GLI (Gap Light Index) under a range of harvest intensities. The model was then used to simulate nine silvicultural treatments based on combinations of three intensities of overstory removal (30%, 45% and 60% of basal area) and three harvest patterns (uniform, narrow strips, large gaps). Simulations showed that increasing overstory removal had less impact on light conditions with uniform harvests, and a more marked effect with more aggregated harvest patterns. Whatever the harvest intensity, uniform cuts almost never created high light conditions (GLI > 50%). Gap cuts, on the other hand, resulted in up to 40% of microsites receiving GLI > 50%. Our results suggest that either a 30% strip or gap cut or a 45–60% uniform partial harvest could be used to accelerate the transition from an aspen dominated composition to a mixedwood stand because both types of cut generate the greatest proportion of moderately low light levels (e.g., 15–40% GLI). These light levels tend to favour an accelerated growth response among shade-tolerant conifers, while preventing excessive recruitment of shade-intolerant species. A better understanding of how spatial patterns of harvest interact with tree removal intensity to affect understory light conditions can provide opportunities for designing silvicultural prescriptions that are tailored to species’ traits and better suited to meet a variety of management objectives

    Potential for false positive HIV test results with the serial rapid HIV testing algorithm

    Get PDF
    Background: Rapid HIV tests provide same-day results and are widely used in HIV testing programs in areas with limited personnel and laboratory infrastructure. The Uganda Ministry of Health currently recommends the serial rapid testing algorithm with Determine, STAT-PAK, and Uni-Gold for diagnosis of HIV infection. Using this algorithm, individuals who test positive on Determine, negative to STAT-PAK and positive to Uni-Gold are reported as HIV positive. We conducted further testing on this subgroup of samples using qualitative DNA PCR to assess the potential for false positive tests in this situation. Results: Of the 3388 individuals who were tested, 984 were HIV positive on two consecutive tests, and 29 were considered positive by a tiebreaker (positive on Determine, negative on STAT-PAK, and positive on Uni-Gold). However, when the 29 samples were further tested using qualitative DNA PCR, 14 (48.2%) were HIV negative. Conclusion: Although this study was not primarily designed to assess the validity of rapid HIV tests and thus only a subset of the samples were retested, the findings show a potential for false positive HIV results in the subset of individuals who test positive when a tiebreaker test is used in serial testing. These findings highlight a need for confirmatory testing for this category of individuals

    Elliptic logarithms, diophantine approximation and the Birch and Swinnerton-Dyer conjecture

    Get PDF
    Most, if not all, unconditional results towards the abc-conjecture rely ultimately on classical Baker's method. In this article, we turn our attention to its elliptic analogue. Using the elliptic Baker's method, we have recently obtained a new upper bound for the height of the S-integral points on an elliptic curve. This bound depends on some parameters related to the Mordell-Weil group of the curve. We deduce here a bound relying on the conjecture of Birch and Swinnerton-Dyer, involving classical, more manageable quantities. We then study which abc-type inequality over number fields could be derived from this elliptic approach.Comment: 20 pages. Some changes, the most important being on Conjecture 3.2, three references added ([Mas75], [MB90] and [Yu94]) and one reference updated [BS12]. Accepted in Bull. Brazil. Mat. So

    Performance of composite measures used in a trial of etanercept and methotrexate as monotherapy or in combination in psoriatic arthritis

    Get PDF
    Objectives: To examine which composite measures are most sensitive to change when measuring psoriatic arthritis (PsA) disease activity, analyses compared the responsiveness of composite measures used in a 48-week randomized, controlled trial of MTX and etanercept in patients with PsA. Methods: The trial randomised 851 patients to receive weekly: MTX (20 mg/week), etanercept (50 mg/week) or MTX plus etanercept. Dichotomous composite measures examined included ACR 20/50/70 responses, minimal disease activity (MDA) and very low disease activity (VLDA). Continuous composite measures examined included Disease Activity Score (28 joints) using CRP (DAS28-CRP), Clinical Disease Activity Index (CDAI), Simplified Disease Activity Index (SDAI), Disease Activity for Psoriatic Arthritis (DAPSA) and Psoriatic Arthritis Disease Activity Score (PASDAS). Results: At week 24, etanercept-treated groups were significantly more effective than MTX monotherapy to achieve ACR 20 (primary end point) and MDA (key secondary end point). When examining score changes from baseline at week 24 across the five continuous composite measures, PASDAS demonstrated relatively greater changes in the etanercept-treated groups compared with MTX monotherapy and had the largest effect size and standardized response. Joint count changes drove overall score changes at week 24 from baseline in all the continuous composite measures except for PASDAS, which was driven by the Physician and Patient Global Assessments. Conclusion: PASDAS was the most sensitive continuous composite measure examined with results that mirrored the protocol-defined primary and key secondary outcomes. Composite measures with multiple domains, such as PASDAS, may better quantify change in PsA disease burden. Trail registration: https://ClinicalTrials.gov, number NCT02376790

    Mechanisms behind surface modification of polypropylene film using an atmospheric-pressure plasma jet

    Get PDF
    Plasma treatments are common for increasing the surface energy of plastics, such as polypropylene (PP), to create improved adhesive properties. Despite the significant differences in plasma sources and plasma properties used, similar effects on the plastic film can be achieved, suggesting a common dominant plasma constituent and underpinning mechanism. However, many details of this process are still unknown. Here we present a study into the mechanisms underpinning surface energy increase of PP using atmospheric-pressure plasmas. For this we use the effluent of an atmospheric-pressure plasma jet (APPJ) since, unlike most plasma sources used for these treatments, there is no direct contact between the plasma and the PP surface; the APPJ provides a neutral, radical-rich environment without charged particles and electric fields impinging on the PP surface. The APPJ is a RF-driven plasma operating in helium gas with small admixtures of O2 (0-1%), where the effluent propagates through open air towards the PP surface. Despite the lack of charged particles and electric fields on the PP surface, measurements of contact angle show a decrease from 93.9° to 70.1° in 1.4 s and to 35° in 120 s, corresponding to a rapid increase in surface energy from 36.4 mN m-1 to 66.5 mN m-1 in the short time of 1.4 s. These treatment effects are very similar to what is found in other devices, highlighting the importance of neutral radicals produced by the plasma. Furthermore, we find an optimum percentage of oxygen of 0.5% within the helium input gas, and a decrease of the treatment effect with distance between the APPJ and the PP surface. These observed effects are linked to two-photon absorption laser-induced fluorescence spectroscopy (TALIF) measurements of atomic oxygen density within the APPJ effluent which show similar trends, implying the importance of this radical in the surface treatment of PP. Analysis of the surface reveals a two stage mechanism for the production of polar bonds on the surface of the polymer: a fast reaction producing carboxylic acid, or a similar ketone, followed by a slower reaction that includes nitrogen from the atmosphere on the surface, producing amides from the ketones

    Model insights into energetic photoelectrons measured at Mars by MAVEN

    Get PDF
    Photoelectrons are important for heating, ionization, and airglow production in planetary atmospheres. Measured electron fluxes provide insight into the sources and sinks of energy in the Martian upper atmosphere. The Solar Wind Electron Analyzer instrument on board the MAVEN (Mars Atmosphere and Volatile EvolutioN) spacecraft measured photoelectrons including Auger electrons with 500 eV energies. A two-stream electron transport code was used to interpret the observations, including Auger electrons associated with K shell ionization of carbon, oxygen, and nitrogen. It explains the processes that control the photoelectron spectrum, such as the solar irradiance at different wavelengths, external electron fluxes from the Martian magnetosheath or tail, and the structure of the upper atmosphere (e.g., the thermal electron density). Our understanding of the complex processes related to the conversion of solar irradiances to thermal energy in the Martian ionosphere will be advanced by model comparisons with measurements of suprathermal electrons by MAVEN

    A One Health overview, facilitating advances in comparative medicine and translational research.

    Get PDF
    Table of contentsA1 One health advances and successes in comparative medicine and translational researchCheryl StroudA2 Dendritic cell-targeted gorilla adenoviral vector for cancer vaccination for canine melanomaIgor Dmitriev, Elena Kashentseva, Jeffrey N. Bryan, David T. CurielA3 Viroimmunotherapy for malignant melanoma in the companion dog modelJeffrey N. Bryan, David Curiel, Igor Dmitriev, Elena Kashentseva, Hans Rindt, Carol Reinero, Carolyn J. HenryA4 Of mice and men (and dogs!): development of a commercially licensed xenogeneic DNA vaccine for companion animals with malignant melanomaPhilip J. BergmanA5 Successful immunotherapy with a recombinant HER2-expressing Listeria monocytogenes in dogs with spontaneous osteosarcoma paves the way for advances in pediatric osteosarcomaNicola J. Mason, Josephine S. Gnanandarajah, Julie B. Engiles, Falon Gray, Danielle Laughlin, Anita Gaurnier-Hausser, Anu Wallecha, Margie Huebner, Yvonne PatersonA6 Human clinical development of ADXS-HER2Daniel O'ConnorA7 Leveraging use of data for both human and veterinary benefitLaura S. TremlA8 Biologic replacement of the knee: innovations and early clinical resultsJames P. StannardA9 Mizzou BioJoint Center: a translational success storyJames L. CookA10 University and industry translational partnership: from the lab to commercializationMarc JacobsA11 Beyond docking: an evolutionarily guided OneHealth approach to drug discoveryGerald J. Wyckoff, Lee Likins, Ubadah Sabbagh, Andrew SkaffA12 Challenges and opportunities for data applications in animal health: from precision medicine to precision husbandryAmado S. GuloyA13 A cloud-based programmable platform for healthHarlen D. HaysA14 Comparative oncology: One Health in actionAmy K. LeBlancA15 Companion animal diseases bridge the translational gap for human neurodegenerative diseaseJoan R. Coates, Martin L. Katz, Leslie A. Lyons, Gayle C. Johnson, Gary S. Johnson, Dennis P. O'BrienA16 Duchenne muscular dystrophy gene therapyDongsheng DuanA17 Polycystic kidney disease: cellular mechanisms to emerging therapiesJames P. CalvetA18 The domestic cat as a large animal model for polycystic kidney diseaseLeslie A. Lyons, Barbara GandolfiA19 The support of basic and clinical research by the Polycystic Kidney Disease FoundationDavid A. BaronA20 Using naturally occurring large animal models of human disease to enable clinical translation: treatment of arthritis using autologous stromal vascular fraction in dogsMark L. WeissA21 Regulatory requirements regarding clinical use of human cells, tissues, and tissue-based productsDebra A. WebsterA22 Regenerative medicine approaches to Type 1 diabetes treatmentFrancis N. KaranuA23 The zoobiquity of canine diabetes mellitus, man's best friend is a friend indeed-islet transplantationEdward J. RobbA24 One Medicine: a development model for cellular therapy of diabetesRobert J. Harman
    corecore