Progress Toward Durable Icephobic Materials

Ice accumulation is a major engineering challenge in many fields including aerospace, power generation, transportation, and infrastructure. A variety of solutions are being researched to address this challenge. Perhaps the most promising method of combating ice accumulation is by applying coatings with low values of interfacial ice adhesion strength, τice. Icephobic materials are those with ice adhesion below 100 kPa, and it has been shown that passive delamination can occur on surfaces with τice below 20 kPa. While various low adhesion surfaces have been prepared, durability concerns pervade applications where surfaces experience repeated icing or freeze-thaw cycles, mechanical abrasion, and particulate erosion. The present thesis explores methods of improving the durability of state-of-the-art icephobic materials in order to make them more suitable solutions to ‘the icing problem.’ Ice adhesion was measured using in-house load cell and centrifugation methods, allowing for the direct comparison of τice values between the materials developed. Various ways of improving the durability of icephobic surfaces were identified, including the stabilization of slippery lubricant-infused porous surfaces (SLIPS) via polymer cross-linking at the interface, copolymerization of commercial poly(dimethylsiloxane) resins with acrylate / styrene monomers yielding highly cross-linked network copolymer coatings, and lowering ice adhesion on commercially available adhesive films by introducing areas of substrate-film detachment. A collaborative study of femtosecond laser micromachining done with McGill University is also included which showed the cross-link density dependence of threshold fluence, and the varied surface morphologies that could be accessed by these means. These studies show effective methods of influencing icephobic material durability using straightforward methodologies and will inspire new investigations toward creating more durable icephobic materials that can alleviate concerns with ice accumulation for people that live in cold climates. Our investigations and proposed work show that cutting-edge research in this field can be done at Western, making Canada a viable leader of global anti-icing research

Reforming Fiscal Institutions in Resource-Rich Arab Economies: Policy Proposals

This paper traces the evolution of fiscal institutions of Resource Rich Arab Economies (RRAEs) over time since their pre-oil days, through the discovery of oil to their build-up of oil exports. It then identifies challenges faced by RRAEs and variations in their severity among the different countries over time. Finally, it articulates specific policy reforms, which, if implemented successfully, could help to overcome these challenges. In some cases, however, these policy proposals may give rise to important trade-offs that will have to be evaluated carefully in individual cases

Basic science232. Certolizumab pegol prevents pro-inflammatory alterations in endothelial cell function

Background: Cardiovascular disease is a major comorbidity of rheumatoid arthritis (RA) and a leading cause of death. Chronic systemic inflammation involving tumour necrosis factor alpha (TNF) could contribute to endothelial activation and atherogenesis. A number of anti-TNF therapies are in current use for the treatment of RA, including certolizumab pegol (CZP), (Cimzia ®; UCB, Belgium). Anti-TNF therapy has been associated with reduced clinical cardiovascular disease risk and ameliorated vascular function in RA patients. However, the specific effects of TNF inhibitors on endothelial cell function are largely unknown. Our aim was to investigate the mechanisms underpinning CZP effects on TNF-activated human endothelial cells. Methods: Human aortic endothelial cells (HAoECs) were cultured in vitro and exposed to a) TNF alone, b) TNF plus CZP, or c) neither agent. Microarray analysis was used to examine the transcriptional profile of cells treated for 6 hrs and quantitative polymerase chain reaction (qPCR) analysed gene expression at 1, 3, 6 and 24 hrs. NF-κB localization and IκB degradation were investigated using immunocytochemistry, high content analysis and western blotting. Flow cytometry was conducted to detect microparticle release from HAoECs. Results: Transcriptional profiling revealed that while TNF alone had strong effects on endothelial gene expression, TNF and CZP in combination produced a global gene expression pattern similar to untreated control. The two most highly up-regulated genes in response to TNF treatment were adhesion molecules E-selectin and VCAM-1 (q 0.2 compared to control; p > 0.05 compared to TNF alone). The NF-κB pathway was confirmed as a downstream target of TNF-induced HAoEC activation, via nuclear translocation of NF-κB and degradation of IκB, effects which were abolished by treatment with CZP. In addition, flow cytometry detected an increased production of endothelial microparticles in TNF-activated HAoECs, which was prevented by treatment with CZP. Conclusions: We have found at a cellular level that a clinically available TNF inhibitor, CZP reduces the expression of adhesion molecule expression, and prevents TNF-induced activation of the NF-κB pathway. Furthermore, CZP prevents the production of microparticles by activated endothelial cells. This could be central to the prevention of inflammatory environments underlying these conditions and measurement of microparticles has potential as a novel prognostic marker for future cardiovascular events in this patient group. Disclosure statement: Y.A. received a research grant from UCB. I.B. received a research grant from UCB. S.H. received a research grant from UCB. All other authors have declared no conflicts of interes

How Mathematicians Obtain Conviction: Implications for Mathematics Instruction and Research on Epistemic Cognition

This is an Accepted Manuscript of an article published by Taylor & Francis in Educational Psychologist on 16th January 2014, available online: http://wwww.tandfonline.com/10.1080/00461520.2013.865527The received view of mathematical practice is that mathematicians gain certainty in mathematical assertions by deductive evidence rather than empirical or authoritarian evidence. This assumption has influenced mathematics instruction where students are expected to justify assertions with deductive arguments rather than by checking the assertion with specific examples or appealing to authorities. In this paper, we argue that the received view about mathematical practice is too simplistic; some mathematicians sometimes gain high levels of conviction with empirical or authoritarian evidence and sometimes do not gain full conviction from the proofs that they read. We discuss what implications this might have, both for for mathematics instruction and theories of epistemic cognition

World Health Organization cardiovascular disease risk charts: revised models to estimate risk in 21 global regions

BACKGROUND: To help adapt cardiovascular disease risk prediction approaches to low-income and middle-income countries, WHO has convened an effort to develop, evaluate, and illustrate revised risk models. Here, we report the derivation, validation, and illustration of the revised WHO cardiovascular disease risk prediction charts that have been adapted to the circumstances of 21 global regions. METHODS: In this model revision initiative, we derived 10-year risk prediction models for fatal and non-fatal cardiovascular disease (ie, myocardial infarction and stroke) using individual participant data from the Emerging Risk Factors Collaboration. Models included information on age, smoking status, systolic blood pressure, history of diabetes, and total cholesterol. For derivation, we included participants aged 40-80 years without a known baseline history of cardiovascular disease, who were followed up until the first myocardial infarction, fatal coronary heart disease, or stroke event. We recalibrated models using age-specific and sex-specific incidences and risk factor values available from 21 global regions. For external validation, we analysed individual participant data from studies distinct from those used in model derivation. We illustrated models by analysing data on a further 123 743 individuals from surveys in 79 countries collected with the WHO STEPwise Approach to Surveillance. FINDINGS: Our risk model derivation involved 376 177 individuals from 85 cohorts, and 19 333 incident cardiovascular events recorded during 10 years of follow-up. The derived risk prediction models discriminated well in external validation cohorts (19 cohorts, 1 096 061 individuals, 25 950 cardiovascular disease events), with Harrell's C indices ranging from 0·685 (95% CI 0·629-0·741) to 0·833 (0·783-0·882). For a given risk factor profile, we found substantial variation across global regions in the estimated 10-year predicted risk. For example, estimated cardiovascular disease risk for a 60-year-old male smoker without diabetes and with systolic blood pressure of 140 mm Hg and total cholesterol of 5 mmol/L ranged from 11% in Andean Latin America to 30% in central Asia. When applied to data from 79 countries (mostly low-income and middle-income countries), the proportion of individuals aged 40-64 years estimated to be at greater than 20% risk ranged from less than 1% in Uganda to more than 16% in Egypt. INTERPRETATION: We have derived, calibrated, and validated new WHO risk prediction models to estimate cardiovascular disease risk in 21 Global Burden of Disease regions. The widespread use of these models could enhance the accuracy, practicability, and sustainability of efforts to reduce the burden of cardiovascular disease worldwide. FUNDING: World Health Organization, British Heart Foundation (BHF), BHF Cambridge Centre for Research Excellence, UK Medical Research Council, and National Institute for Health Research

Equalization of four cardiovascular risk algorithms after systematic recalibration: individual-participant meta-analysis of 86 prospective studies

Aims: There is debate about the optimum algorithm for cardiovascular disease (CVD) risk estimation. We conducted head-to-head comparisons of four algorithms recommended by primary prevention guidelines, before and after ‘recalibration’, a method that adapts risk algorithms to take account of differences in the risk characteristics of the populations being studied. Methods & Results: Using individual-participant data on 360737 participants without CVD at baseline in 86 prospective studies from 22 countries, we compared the Framingham risk score (FRS), Systematic COronary Risk Evaluation (SCORE), pooled cohort equations (PCE), and Reynolds risk score (RRS). We calculated measures of risk discrimination and calibration, and modelled clinical implications of initiating statin therapy in people judged to be at ‘high’ 10 year CVD risk. Original risk algorithms were recalibrated using the risk factor profile and CVD incidence of target populations. The four algorithms had similar risk discrimination. Before recalibration, FRS, SCORE, and PCE overpredicted CVD risk on average by 10%, 52%, and 41%, respectively, whereas RRS under-predicted by 10%. Original versions of algorithms classified 29–39% of individuals aged \u3e_40years as high risk. By contrast, recalibration reduced this proportion to 22–24% for every algorithm. We estimated that to prevent one CVD event, it would be necessary to initiate statin therapy in 44–51 such individuals using original algorithms, in contrast to 37–39 individuals with recalibrated algorithms. Conclusions: Before recalibration, the clinical performance of four widely used CVD risk algorithms varied substantially. By contrast, simple recalibration nearly equalized their performance and improved modelled targeting of preventive action to clinical need

A Multicenter, Randomized, Placebo‐Controlled Trial of Atorvastatin for the Primary Prevention of Cardiovascular Events in Patients With Rheumatoid Arthritis

Objective: Rheumatoid arthritis (RA) is associated with increased cardiovascular event (CVE) risk. The impact of statins in RA is not established. We assessed whether atorvastatin is superior to placebo for the primary prevention of CVEs in RA patients. Methods: A randomized, double‐blind, placebo‐controlled trial was designed to detect a 32% CVE risk reduction based on an estimated 1.6% per annum event rate with 80% power at P 50 years or with a disease duration of >10 years who did not have clinical atherosclerosis, diabetes, or myopathy received atorvastatin 40 mg daily or matching placebo. The primary end point was a composite of cardiovascular death, myocardial infarction, stroke, transient ischemic attack, or any arterial revascularization. Secondary and tertiary end points included plasma lipids and safety. Results: A total of 3,002 patients (mean age 61 years; 74% female) were followed up for a median of 2.51 years (interquartile range [IQR] 1.90, 3.49 years) (7,827 patient‐years). The study was terminated early due to a lower than expected event rate (0.70% per annum). Of the 1,504 patients receiving atorvastatin, 24 (1.6%) experienced a primary end point, compared with 36 (2.4%) of the 1,498 receiving placebo (hazard ratio [HR] 0.66 [95% confidence interval (95% CI) 0.39, 1.11]; P = 0.115 and adjusted HR 0.60 [95% CI 0.32, 1.15]; P = 0.127). At trial end, patients receiving atorvastatin had a mean ± SD low‐density lipoprotein (LDL) cholesterol level 0.77 ± 0.04 mmoles/liter lower than those receiving placebo (P < 0.0001). C‐reactive protein level was also significantly lower in the atorvastatin group than the placebo group (median 2.59 mg/liter [IQR 0.94, 6.08] versus 3.60 mg/liter [IQR 1.47, 7.49]; P < 0.0001). CVE risk reduction per mmole/liter reduction in LDL cholesterol was 42% (95% CI −14%, 70%). The rates of adverse events in the atorvastatin group (n = 298 [19.8%]) and placebo group (n = 292 [19.5%]) were similar. Conclusion: Atorvastatin 40 mg daily is safe and results in a significantly greater reduction of LDL cholesterol level than placebo in patients with RA. The 34% CVE risk reduction is consistent with the Cholesterol Treatment Trialists’ Collaboration meta‐analysis of statin effects in other populations

Factors Associated with Revision Surgery after Internal Fixation of Hip Fractures

Background: Femoral neck fractures are associated with high rates of revision surgery after management with internal fixation. Using data from the Fixation using Alternative Implants for the Treatment of Hip fractures (FAITH) trial evaluating methods of internal fixation in patients with femoral neck fractures, we investigated associations between baseline and surgical factors and the need for revision surgery to promote healing, relieve pain, treat infection or improve function over 24 months postsurgery. Additionally, we investigated factors associated with (1) hardware removal and (2) implant exchange from cancellous screws (CS) or sliding hip screw (SHS) to total hip arthroplasty, hemiarthroplasty, or another internal fixation device. Methods: We identified 15 potential factors a priori that may be associated with revision surgery, 7 with hardware removal, and 14 with implant exchange. We used multivariable Cox proportional hazards analyses in our investigation. Results: Factors associated with increased risk of revision surgery included: female sex, [hazard ratio (HR) 1.79, 95% confidence interval (CI) 1.25-2.50; P = 0.001], higher body mass index (fo

GaPA: An Application to Assist Novice Users With 3D Printing

The 3D printing process can be daunting to novices, requiring knowledge of a multitude of settings to determine a part's optimal printing configuration. We have developed a software application that guides beginners through the 3D printing process, which utilizes an intuitive UI for novices. This program inputs a user's .stl file and asks about its purpose through multiple choice questions, then uses a heuristic algorithm to determine the top 4 orientations and associated settings. The user can then generate the G-Code for each orientation. The goal of this program, titled G-Code and Printer Automation (GaPA), is to be used as an introductory slicing software. It is currently being used by large groups of students in Design and Manufacturing courses at WPI, with positive results