Impact of Colonoscopy Bowel Preparation on Intestinal Microbiota

The gut microbiota is important in maintaining human health, but numerous factors have the potential to alter its composition. Our aim was to examine the impact of a standard bowel preparation on the intestinal microbiota using two different techniques. Fifteen subjects undergoing colonoscopy consumed a bowel preparation comprised of 10 mg bisacodyl and 2 L polyethylene glycol. The microbiota of stool samples, collected one month before, one week before (pre-colonoscopy), and one week, one month, and three to six months after colonoscopy (post-colonoscopy) was evaluated. Two samples were taken three to six months apart from five healthy subjects who did not undergo colonoscopy. Universal primers targeting the V2-V3 region of the 16S rRNA gene were used to PCR amplify all samples for denaturing gradient gel electrophoresis (PCR-DGGE). Pre- and post-colonoscopy samples were compared using Dice's similarity coefficients. Three samples from ten subjects who underwent colonoscopy, and both samples from the five subjects who didn't, were used for high-throughput sequencing of the V1-V3 region of the 16S rRNA gene. Samples were curated and analysed in Mothur. Results of the DGGE analyses show that the fecal microbiota of a small number of subjects had short-term changes. High-throughput sequencing results indicated that the variation between the samples of subjects who underwent colonoscopy was no greater than the variation observed between samples from subjects who did not. We conclude that bowel preparation does not have a lasting effect on the composition of the intestinal microbiota for the majority of subjects.This work was funded by an Australian Post-Graduate Award scholarship. The funders had no role in the study design, data collection and analysis, decision to publish, or preparation of the manuscript

All-Wales licensed premises intervention (AWLPI): a randomised controlled trial to reduce alcohol-related violence

Background: Alcohol-related violence in and in the vicinity of licensed premises continues to place a considerable burden on the United Kingdom’s (UK) health services. Robust interventions targeted at licensed premises are therefore required to reduce the costs of alcohol-related harm. Previous evaluations of interventions in licensed premises have a number of methodological limitations and none have been conducted in the UK. The aim of the trial was to determine the effectiveness of the Safety Management in Licensed Environments intervention designed to reduce alcohol-related violence in licensed premises, delivered by Environmental Health Officers, under their statutory authority to intervene in cases of violence in the workplace.<p></p> Methods/Design: A national randomised controlled trial, with licensed premises as the unit of allocation. Premises were identified from all 22 Local Authorities in Wales. Eligible premises were those with identifiable violent incidents on premises, using police recorded violence data. Premises were allocated to intervention or control by optimally balancing by Environmental Health Officer capacity in each Local Authority, number of violent incidents in the 12 months leading up to the start of the project and opening hours. The primary outcome measure is the difference in frequency of violence between intervention and control premises over a 12 month follow-up period, based on a recurrent event model. The trial incorporates an embedded process evaluation to assess intervention implementation, fidelity, reach and reception, and to interpret outcome effects, as well as investigate its economic impact.<p></p> Discussion: The results of the trial will be applicable to all statutory authorities directly involved with managing violence in the night time economy and will provide the first formal test of Health and Safety policy in this environment. If successful, opportunities for replication and generalisation will be considered.<p></p&gt

An investigation of movement dynamics and muscle activity during traditional and accentuated-eccentric squatting.

Accentuated-eccentric loading (AEL) takes advantage of the high force producing potential of eccentric muscle contractions, potentially maximising mechanical tension within the muscle. However, evidence is lacking on how AEL squatting may load the involved musculature, limiting scientifically justified programming recommendations. The purpose of this study was to investigate the effects of concentric and eccentric loads on joint loading and muscle activity of the lower limbs. Resistance trained males performed traditional squatting (20–100% of concentric one-repetition maximum [1RM]) and AEL squatting with eccentric loads (110–150% of 1RM) provided by a novel motorised isotonic resistance machine (Kineo). Kinetics and kinematics of the hip, knee, and ankle joints were collected, with electromyography from the gluteus maximus, vastus lateralis, biceps femoris, and gastrocnemius medialis. A secondary cohort underwent a kinematic and electromyography analysis of squatting technique to compare Kineo and back and front barbell squatting. Knee joint peak eccentric moments occurred at 120% 1RM (P = 0.045), with no further increase thereafter. As eccentric load increased, the time course of moment development occurred earlier in the eccentric phase. This resulted in a 37% increase in eccentric knee extensor work from the 80% 1RM trial to the 120% 1RM trial (P<0.001). Neither hip nor ankle joints displayed further change in kinetics as eccentric load increased above 100% 1RM. Electromyographic activity during traditional squatting was ~15–30% lower in all eccentric trials than in concentric trials for all muscles. EMG plateaued between a load of 80–100% 1RM during the eccentric trials and did not increase with AEL. No significant differences in kinematics were found between Kineo and barbell squatting. The knee extensors appear to be preferentially loaded during AEL squatting. The greater work performed during the eccentric phase of the squat as eccentric load increased suggests greater total mechanical tension could be the cause of adaptations from AEL. Our data suggest that AEL should be programmed with a load of 120% of 1RM. Further studies are needed to confirm the longer-term training effects of AEL

Governing culture: legislators, interpreters and accountants

Cultural policy has become dominated by questions of how to account for the intangible value of government investments. This is as a result of longstanding developments within government’s approaches to policy making, most notably those influenced by practices of audit and accounting. This paper will outline these developments with reference to Peter Miller’s concept of calculative practices, and will argue two central points: first, that there are practical solutions to the problem of measuring the value of culture that connect central government discourses with the discourses of the cultural sector; and second, the paper will demonstrate how academic work has been central to this area of policy making. As a result of the centrality of accounting academics in cultural policy, for example in providing advice on the appropriate measurement tools and techniques, questions are raised about the role academia might take vis-à-vis public policy. Accounting professionals and academics not only provide technical expertise that informs state calculative practices, but also play a surveillance role through the audit and evaluation of government programmes, and act as interpreters in defining terms of performance measurement, success and failure. The paper therefore concludes by reflecting on recent work by Phillip Schlesinger to preserve academic integrity whilst allowing accounting scholars and academics influence and partnership in policy

Freeze-Drying as a Novel Biofabrication Method for Achieving a Controlled Microarchitecture within Large, Complex Natural Biomaterial Scaffolds

The biofabrication of large scaffolds from natural biomaterials into complex 3D shapes with controllable microarchitecture remains a major challenge. Freeze-drying (or lyophilization) is a technique used to create bioactive scaffolds with a porous architecture and is typically only used to generate scaffolds in planar 3D geometries. Here we report the development of a new biofabrication process to form a collagen-based scaffold into a large, complex geometry which has a large height to width ratio, and a controlled porous microarchitecture. This biofabrication process was validated through the successful development of a heart valve shaped scaffold, fabricated from a collagen-glycosaminoglycan co-polymer. Notably, despite the significant challenges in using freeze-drying to create such a structure, the resultant scaffold had a uniform, homogeneous pore architecture throughout. This was achieved through optimization of the freeze-drying mold and freezing parameters. We believe this to be the first demonstration of using freeze-drying to create a large, complex scaffold geometry with a controlled, porous architecture using natural materials. This study validates the potential of using freeze-drying for development of organ-specific scaffold geometries for tissue engineering applications, which up until now might not have been considered feasible

Using Rapid Reviews in Nursing and Midwifery Research: An Example From a Study Commissioned to Inform Policy-Making

Aim: To illustrate the potential use of rapid review approaches in nursing and midwifery research by presenting a worked example from a study conducted to inform policy decision making. Background: Rapid reviews, which can be defined as outputs of a knowledge synthesis approach that involves modifying or omitting elements of a systematic review process due to limited time or resources, are becoming increasingly popular in health research. This paper provides guidance on how a rapid review can be undertaken and discusses the strengths and challenges of the approach. Data source and research design: Data from a rapid review of the literature undertaken in 2015 is used as a worked example to highlight one method of undertaking a rapid review. Implications for nursing: Seeking evidence to inform health policy making or evidence based practice is a process that can be limited by time constraints, making it difficult to conduct comprehensive systematic reviews

Assessment of ibrutinib plus rituximab in front-line CLL (FLAIR trial): study protocol for a phase III randomised controlled trial

Background Treatment of chronic lymphocytic leukaemia (CLL) has seen a substantial improvement over the last few years. Combination immunochemotherapy, such as fludarabine, cyclophosphamide and rituximab (FCR), is now standard first-line therapy. However, the majority of patients relapse and require further therapy, and so new, effective, targeted therapies that improve remission rates, reduce relapses, and have fewer side effects, are required. The FLAIR trial will assess whether ibrutinib plus rituximab (IR) is superior to FCR in terms of progression-free survival (PFS). Methods/design FLAIR is a phase III, multicentre, randomised, controlled, open, parallel-group trial in patients with previously untreated CLL. A total of 754 participants will be randomised on a 1:1 basis to receive standard therapy with FCR or IR. Participants randomised to FCR will receive a maximum of six 28-day treatment cycles. Participants randomised to IR will receive six 28-day cycles of rituximab, and ibrutinib taken daily for 6 years until minimal residual disease (MRD) negativity has been recorded for the same amount of time as it took to become MRD negative, or until disease progression. The primary endpoint is PFS according to the International Workshop on CLL (IWCLL) criteria. Secondary endpoints include: overall survival; proportion of participants with undetectable MRD; response to therapy by IWCLL criteria; safety and toxicity; health-related quality of life (QoL); and cost-effectiveness. Discussion The trial aims to provide evidence for the future first-line treatment of CLL patients by assessing whether IR is superior to FCR in terms of PFS, and whether toxicity rates are favourable. Trial registration ISRCTN01844152. Registered on 8 August 2014, EudraCT number 2013-001944-76. Registered on 26 April 2013

Diversity of antimicrobial-resistant bacteria isolated from Australian chicken and pork meat

Antimicrobial-resistant bacteria are frequently isolated from retail meat and may infect humans. To determine the diversity of antimicrobial-resistant bacteria in Australian retail meat, bacteria were cultured on selective media from raw chicken (n = 244) and pork (n = 160) meat samples obtained from all four major supermarket chains in the ACT/NSW, Australia, between March and June 2021. Antimicrobial susceptibility testing (AST) was performed for 13 critically and 4 highly important antibiotics as categorised by the World Health Organization (WHO) for a wide range of species detected in the meat samples. A total of 288 isolates underwent whole-genome sequencing (WGS) to identify the presence of antimicrobial resistance (AMR) genes, virulence genes, and plasmids. AST testing revealed that 35/288 (12%) of the isolates were found to be multidrug-resistant (MDR). Using WGS data, 232/288 (81%) of the isolates were found to harbour resistance genes for critically or highly important antibiotics. This study reveals a greater diversity of AMR genes in bacteria isolated from retail meat in Australia than previous studies have shown, emphasising the importance of monitoring AMR in not only foodborne pathogenic bacteria, but other species that are capable of transferring AMR genes to pathogenic bacteria