Contour Temperature Programmed Desorption for Monitoring Multiple Chemical Reaction Products

A simple method for obtaining a comprehensive overview of major compounds desorbing from the surface during temperature programmed desorption (TPD) experiments is outlined. Standard commercially available equipment is used to perform the experiment. The method is particularly valuable when high molecular mass compounds are being studied. The acquisition of contour temperature programmed desorption (CTPD) spectra, sampling 50-dalton mass ranges at a time in the thermal desorption experiments, is described and demonstrated for the interaction of benzotriazole adsorbed on a Ni(111) surface. Conventional two-dimensional TPD spectra can be extracted from the CTPD by taking vertical slices of the contour

Cytotoxicity in the Age of Nano: The Role of Fourth Period Transition Metal Oxide Nanoparticle Physicochemical Properties

A clear understanding of physicochemical factors governing nanoparticle toxicity is still in its infancy. We used a systematic approach to delineate physicochemical properties of nanoparticles that govern cytotoxicity. The cytotoxicity of fourth period metal oxide nanoparticles (NPs): TiO2, Cr2O3, Mn2O3, Fe2O3, NiO, CuO, and ZnO increases with the atomic number of the transition metal oxide. This trend was not cell-type specific, as observed in non-transformed human lung cells (BEAS-2B) and human bronchoalveolar carcinoma-derived cells (A549). Addition of NPs to the cell culture medium did not significantly alter pH. Physiochemical properties were assessed to discover the determinants of cytotoxicity: (1) point-of-zero charge (PZC) (i.e., isoelectric point) described the surface charge of NPs in cytosolic and lysosomal compartments; (2) relative number of available binding sites on the NP surface quantified by X-ray photoelectron spectroscopy was used to estimate the probability of biomolecular interactions on the particle surface; (3) band-gap energy measurements to predict electron abstraction from NPs which might lead to oxidative stress and subsequent cell death; and (4) ion dissolution. Our results indicate that cytotoxicity is a function of particle surface charge, the relative number of available surface binding sites, and metal ion dissolution from NPs. These findings provide a physicochemical basis for both risk assessment and the design of safer nanomaterials

Nontoxic Carbon Dots Potently Inhibit Human Insulin Fibrillation

One prevention and therapeutic strategy for diseases associated with peptide or protein fibrillation is to inhibit or delay the fibrillation process. Carbon dots (C–Dots) have recently emerged as benign nanoparticles to replace toxic quantum dots and have attracted great attention because of their unique optical properties and potential applications in biological systems. However, the effect of C-Dots on peptide or protein fibrillation has not been explored. In this in vitro study, human insulin was selected as a model to investigate the effect of C-Dots on insulin fibrillation. Water-soluble fluorescent C-Dots with sizes less than 6 nm were prepared from carbon powder and characterized by UV–vis spectroscopy, fluorescence, Fourier transform infrared spectrophotometry, X-ray photoelectron spectrometry, transmission electron microscopy, and atomic force microscopy. These C-Dotswere able to efficiently inhibit insulin fibrillation in a concentration-dependent manner. Theinhibiting effect of C-Dots was even observed at 0.2 μg/mL. Importantly, 40 μg/mL of C-Dots prevent 0.2 mg/mL of human insulin from fibrillation for 5 days under 65 °C, whereas insulin denatures in 3 h under the same conditions without C-Dots. The inhibiting effect is likely due to the interaction between C-Dots and insulin species before elongation. Cytotoxicity study shows that these C-Dots have very low cytotoxicity. Therefore, these C-Dots have the potential to inhibit insulin fibrillation in biological systems and in the pharmaceutical industry for the processing and formulation of insulin

Liquid Reaction Apparatus for Surface Analysis

A design for a liquid reaction apparatus is described which allows surfaces prepared in ultrahigh vacuum (UHV) to be reacted with solutions of a wide pH range under dry nitrogen atmosphere and subsequently returned to UHV for surface analysis

Fe promoted NOx storage materials: Structural properties and NOx uptake

Fe promoted NOx storage materials were synthesized in the form of FeOx/BaO/Al2O3 ternary oxides with varying BaO (8 and 20 wt %) and Fe (5 and 10 wt %) contents. Synthesized NOx storage materials were investigated via TEM, EELS, BET, FTIR, TPD, XRD, XPS, and Raman spectroscopy, and the results were compared with the conventional BaO/Al2O3 NOx storage system. Our results suggest that the introduction of Fe in the BaO/Al2O3 system leads to the formation of additional NOx storage sites which store NOx mostly in the form of bidentate nitrates. NO2 adsorption experiments at 323 K via FTIR indicate that, particularly in the early stages of the NOx uptake, the NOx storage mechanism is significantly altered in the presence of Fe sites where a set of new surface nitrosyl and nitrite groups were detected on the Fe sites and the surface oxidation of nitrites to nitrates is significantly hindered with respect to the BaO/Al2O3 system. Evidence for the existence of both Fe3+ as well as reduced Fe2+/(3-x)+ sites on the freshly pretreated materials was detected via EELS, FTIR, Raman, and XRD experiments. The influence of the Fe sites on the structural properties of the synthesized materials was also studied by performing ex situ annealing protocols within 323-1273 K followed by XRD and Raman experiments where the temperature dependent changes in the morphology and the composition of the surface domains were analyzed in detail. On the basis of the TPD data, it was found that the relative stability of the stored NOx species is influenced by the morphology of the Ba and Fe containing NOx-storage domains. The relative stabilities of the investigated NOx species were found to increase in the following order: N2O3/NO+ < nitrates on γ-Al2O3 < surface nitrates on BaO < bidentate nitrates on FeOx sites < bulk nitrates on BaO. © 2010 American Chemical Society

Chemically-synthesised, atomically-precise gold clusters deposited and activated on titania

Synchrotron XPS was used to investigate a series of chemically-synthesised, atomically-precise gold clusters Au(n)(PPh₃)(y) (n = 8, 9, 11 and 101, with y depending on cluster size) immobilized on titania nanoparticles. The gold clusters were washed with toluene at 100 °C or calcined at 200 °C to remove the organic ligand. From the position of the Au 4f₇/₂ peak it is concluded that cluster size is not altered through the deposition. From the analysis of the phosphorous spectra, it can be concluded that the applied heat treatment removes the organic ligands. Washing and calcination leads to partial oxidation and partial agglomeration of the clusters. Oxidation of the clusters is most likely due to the interaction of the cluster core with the oxygen of the titania surface after removal of ligands. The position of the Au 4f₇/₂ peak indicates that the size of the agglomerated clusters is still smaller than that of Au₁₀₁.David P. Anderson, Jason F. Alvino, Alexander Gentleman, Hassan Al Qahtani, Lars Thomsen, Matthew I. J. Polson, Gregory F. Metha, Vladimir B. Golovko and Gunther G. Andersso

A deep investigation into the structure of carbon dots

Since their discovery, carbon dots (CDs) have been a promising nanomaterial in a variety of fields including nanomedicine. Despite their potential in this area, there are many obstacles to overcome for CDs to be approved for biomedical use. One major hindrance to CDs’ approval is related to their poorly defined structure. Herein a structural study of CDs is presented in order to rectify this shortcoming. The properties of three CDs which have significant promise in biomedical applications, black CDs (B-CDs), carbon nitride dots (CNDs), and yellow CDs (Y-CDs), are compared in order to develop a coherent structural model for each nanosystem. Absorption coefficients were measured for each system and this data gave insight on the level of disorder in each system. Furthermore, extensive structural characterization has been performed in order to derive structural information for each system. This data showed that B-CDs and CNDs are functionalized to a greater degree and are also more disordered and amorphous than Y-CDs. These techniques were used to develop a structural model consistent with the obtained data and what is known for carbonic nanostructures. These models can be used to analyze CD emission properties and to better understand the structure-property relationship in CDs