130 research outputs found

    Preparation of Sago Bark-Derived Magnetic Adsorbent by Impregnation and Carbonation for Lead and Copper Ions Removal

    Get PDF
    This paper presents an alternative utilisation of sago barks from the sago industry. In this study, a sago bark-derived magnetic adsorbent was developed by impregnation with ferric chloride hexahydrate (FeCl3H2O) and carbonisation method. The potential of the sago bark-derived magnetic adsorbent to remove lead ion (Pb2+) and copper ion (Cu2+) from aqueous solution was assessed in a batch system. Adsorption experiments were performed as a function of initial concentration (5.0 – 15.0 mg/L). The magnetic adsorbent displayed good ferromagnetic property which aids the separation of the adsorbent after the decontamination process. The magnetic adsorbent was characterised by Fourier Transform Infrared (FTIR) Spectroscopy and Scanning Electron Microscopy embedded with an Energy Dispersive X-ray Spectrometer (SEM-EDX). The FT-IR spectra analysis revealed the surface functional groups of the magnetic adsorbent are C−O−C, C−OH, C− H, −C−C−O, Fe-O, O-H, and C-O. The maximum monolayer adsorption capacities were discovered to be 172.414 and 12500 mg/g for lead and copper ions, respectively. The batch adsorption isotherms were analysed using Langmuir, Freundlich, Jovanovic and Temkin isotherm models. The experimental data perfectly fitted with Langmuir isotherm modelling. The results indicated that the sago bark-derived magnetic adsorbent potentially to be an alternative in replacing more high-priced adsorbents for its application in heavy metal ions removal

    Perceptions on the accessibility of Islamic banking in the UK—Challenges, opportunities and divergence in opinion

    Get PDF
    This study examines the views of UK-based Muslims, Islamic Scholars and Islamic banking employees on the current state of the latter industry, both in practical terms and as regards engagement with the nation’s large, but often marginalised Islamic community. The British Government has recently championed the Islamic banking sector and committed to supporting it as a means of addressing financial services needs and consolidating London’s position as the global centre for Islamic investment. The analysis adds to the substantive literature in two principal ways: (i) by contextualising the evidence via the notions of empowerment, engagement and social justice that underpin both the state’s attempts to foster growth and the central tenets of Islam; and (ii) by placing comparison of the opinions of key groups at the heart of the investigation. The findings reveal that while progress has been made, UK-based Muslims see several substantive impediments to access, including the complex terminology of Islamic banking products, the lack of internet banking facilities and branch networks as well as a generalised lack of interest in marketing on the part of the institutions. Whilst some coincidence of perception is evident, the views of bankers are shown to be out of line with those of the other parties in a number of key areas. For example, bankers appear to see less potential in the role of the internet as a medium for spreading awareness than do either potential customers or religious scholars. The paper therefore concludes with a call for multi-party Ijtihad and Qiyas (deductive analogy) that will encourage industrial outreach and, in so doing, support long-term growth

    Search for Gravitational Waves Associated with Gamma-Ray Bursts Detected by Fermi and Swift during the LIGO-Virgo Run O3b

    Get PDF
    We search for gravitational-wave signals associated with gamma-ray bursts (GRBs) detected by the Fermi and Swift satellites during the second half of the third observing run of Advanced LIGO and Advanced Virgo (2019 November 1 15:00 UTC-2020 March 27 17:00 UTC). We conduct two independent searches: A generic gravitational-wave transients search to analyze 86 GRBs and an analysis to target binary mergers with at least one neutron star as short GRB progenitors for 17 events. We find no significant evidence for gravitational-wave signals associated with any of these GRBs. A weighted binomial test of the combined results finds no evidence for subthreshold gravitational-wave signals associated with this GRB ensemble either. We use several source types and signal morphologies during the searches, resulting in lower bounds on the estimated distance to each GRB. Finally, we constrain the population of low-luminosity short GRBs using results from the first to the third observing runs of Advanced LIGO and Advanced Virgo. The resulting population is in accordance with the local binary neutron star merger rate. © 2022. The Author(s). Published by the American Astronomical Society

    Narrowband Searches for Continuous and Long-duration Transient Gravitational Waves from Known Pulsars in the LIGO-Virgo Third Observing Run

    Get PDF
    Isolated neutron stars that are asymmetric with respect to their spin axis are possible sources of detectable continuous gravitational waves. This paper presents a fully coherent search for such signals from eighteen pulsars in data from LIGO and Virgo's third observing run (O3). For known pulsars, efficient and sensitive matched-filter searches can be carried out if one assumes the gravitational radiation is phase-locked to the electromagnetic emission. In the search presented here, we relax this assumption and allow both the frequency and the time derivative of the frequency of the gravitational waves to vary in a small range around those inferred from electromagnetic observations. We find no evidence for continuous gravitational waves, and set upper limits on the strain amplitude for each target. These limits are more constraining for seven of the targets than the spin-down limit defined by ascribing all rotational energy loss to gravitational radiation. In an additional search, we look in O3 data for long-duration (hours-months) transient gravitational waves in the aftermath of pulsar glitches for six targets with a total of nine glitches. We report two marginal outliers from this search, but find no clear evidence for such emission either. The resulting duration-dependent strain upper limits do not surpass indirect energy constraints for any of these targets. © 2022. The Author(s). Published by the American Astronomical Society

    Search for gravitational-wave transients associated with magnetar bursts in advanced LIGO and advanced Virgo data from the third observing run

    Get PDF
    Gravitational waves are expected to be produced from neutron star oscillations associated with magnetar giant f lares and short bursts. We present the results of a search for short-duration (milliseconds to seconds) and longduration (∌100 s) transient gravitational waves from 13 magnetar short bursts observed during Advanced LIGO, Advanced Virgo, and KAGRA’s third observation run. These 13 bursts come from two magnetars, SGR1935 +2154 and SwiftJ1818.0−1607. We also include three other electromagnetic burst events detected by FermiGBM which were identified as likely coming from one or more magnetars, but they have no association with a known magnetar. No magnetar giant flares were detected during the analysis period. We find no evidence of gravitational waves associated with any of these 16 bursts. We place upper limits on the rms of the integrated incident gravitational-wave strain that reach 3.6 × 10−ÂČÂł Hz at 100 Hz for the short-duration search and 1.1 ×10−ÂČÂČ Hz at 450 Hz for the long-duration search. For a ringdown signal at 1590 Hz targeted by the short-duration search the limit is set to 2.3 × 10−ÂČÂČ Hz. Using the estimated distance to each magnetar, we derive upper limits upper limits on the emitted gravitational-wave energy of 1.5 × 1044 erg (1.0 × 1044 erg) for SGR 1935+2154 and 9.4 × 10^43 erg (1.3 × 1044 erg) for Swift J1818.0−1607, for the short-duration (long-duration) search. Assuming isotropic emission of electromagnetic radiation of the burst ïŹ‚uences, we constrain the ratio of gravitational-wave energy to electromagnetic energy for bursts from SGR 1935+2154 with the available ïŹ‚uence information. The lowest of these ratios is 4.5 × 103

    A joint Fermi-GBM and Swift-BAT analysis of gravitational-wave candidates from the third gravitational-wave observing run

    Get PDF
    We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) searches for gamma-ray/X-ray counterparts to gravitational-wave (GW) candidate events identified during the third observing run of the Advanced LIGO and Advanced Virgo detectors. Using Fermi-GBM onboard triggers and subthreshold gamma-ray burst (GRB) candidates found in the Fermi-GBM ground analyses, the Targeted Search and the Untargeted Search, we investigate whether there are any coincident GRBs associated with the GWs. We also search the Swift-BAT rate data around the GW times to determine whether a GRB counterpart is present. No counterparts are found. Using both the Fermi-GBM Targeted Search and the Swift-BAT search, we calculate flux upper limits and present joint upper limits on the gamma-ray luminosity of each GW. Given these limits, we constrain theoretical models for the emission of gamma rays from binary black hole mergers

    Constraints on the cosmic expansion history from GWTC–3

    Get PDF
    We use 47 gravitational wave sources from the Third LIGO–Virgo–Kamioka Gravitational Wave Detector Gravitational Wave Transient Catalog (GWTC–3) to estimate the Hubble parameter H(z), including its current value, the Hubble constant H0. Each gravitational wave (GW) signal provides the luminosity distance to the source, and we estimate the corresponding redshift using two methods: the redshifted masses and a galaxy catalog. Using the binary black hole (BBH) redshifted masses, we simultaneously infer the source mass distribution and H(z). The source mass distribution displays a peak around 34 M⊙, followed by a drop-off. Assuming this mass scale does not evolve with the redshift results in a H(z) measurement, yielding H0=68−8+12 km   s−1 Mpc−1{H}_{0}={68}_{-8}^{+12}\,\mathrm{km}\ \,\ {{\rm{s}}}^{-1}\,{\mathrm{Mpc}}^{-1} (68% credible interval) when combined with the H0 measurement from GW170817 and its electromagnetic counterpart. This represents an improvement of 17% with respect to the H0 estimate from GWTC–1. The second method associates each GW event with its probable host galaxy in the catalog GLADE+, statistically marginalizing over the redshifts of each event's potential hosts. Assuming a fixed BBH population, we estimate a value of H0=68−6+8 km   s−1 Mpc−1{H}_{0}={68}_{-6}^{+8}\,\mathrm{km}\ \,\ {{\rm{s}}}^{-1}\,{\mathrm{Mpc}}^{-1} with the galaxy catalog method, an improvement of 42% with respect to our GWTC–1 result and 20% with respect to recent H0 studies using GWTC–2 events. However, we show that this result is strongly impacted by assumptions about the BBH source mass distribution; the only event which is not strongly impacted by such assumptions (and is thus informative about H0) is the well-localized event GW190814

    Open data from the third observing run of LIGO, Virgo, KAGRA, and GEO

    Get PDF
    The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in 2019 April and lasting six months, O3b starting in 2019 November and lasting five months, and O3GK starting in 2020 April and lasting two weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main data set, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages

    Search for eccentric black hole coalescences during the third observing run of LIGO and Virgo

    Get PDF
    Despite the growing number of binary black hole coalescences confidently observed through gravitational waves so far, the astrophysical origin of these binaries remains uncertain. Orbital eccentricity is one of the clearest tracers of binary formation channels. Identifying binary eccentricity, however, remains challenging due to the limited availability of gravitational waveforms that include the effects of eccentricity. Here, we present observational results for a waveform-independent search sensitive to eccentric black hole coalescences, covering the third observing run (O3) of the LIGO and Virgo detectors. We identified no new high-significance candidates beyond those that have already been identified with searches focusing on quasi-circular binaries. We determine the sensitivity of our search to high-mass (total source-frame mass M > 70 M⊙) binaries covering eccentricities up to 0.3 at 15 Hz emitted gravitational-wave frequency, and use this to compare model predictions to search results. Assuming all detections are indeed quasi-circular, for our fiducial population model, we place a conservative upper limit for the merger rate density of high-mass binaries with eccentricities 0 < e ≀ 0.3 at 16.9 Gpc−3 yr−1 at the 90% confidence level

    Design of an ehd pump for microfluids application

    No full text
    This project is about studies of ion-drag EHD micropump and to design a readyto-fabricate improved design. The study mainly focuses on the factors that can improve the pumping performance of the micropump. This report started with the studies of theoretical aspect of microfluidics which are related to micropump system and then the principle of the ion-drag EHD pumping. The fabrication methods of micropump are elaborated which to find the cost effective and technically validated fabrication. Parylene and SU-8 will be the main choice of the material due to its cheap and easy to fabricate advantages, to form the skeletal structure of the micropump. Gold is used as electrode of its good conductivity, low residual stress and ease of deposition. A synthesis of comparison results of pumping performance of ion-drag micropump from a few previous testing by other researchers is conducted. The comparisons showed that electrode designs, electrode pair gap and channel height played the main important roles of improving the pumping performance, and they are all related with backflow effect of electric-fluidic field. The final design of the ion-drag micropump is a parallel electrodes micropump, with proposed improvement by valving structure to reduce backflow effect
    • 

    corecore