Probing the centre of the large circumstellar disc in M17

We investigated the nature of the hitherto unresolved elliptical infrared emission in the centre of the ~20000 AU disc silhouette in M 17. We combined high-resolution JHKsL'M' band imaging carried out with NAOS/CONICA at the VLT with [Fe II] narrow band imaging using SOFI at the NTT. The analysis is supported by Spitzer/GLIMPSE archival data and by already published SINFONI/VLT Integral Field Spectroscopy data. For the first time, we resolve the elongated central infrared emission into a point-source and a jet-like feature that extends to the northeast in the opposite direction of the recently discovered collimated H2 jet. They are both orientated almost perpendicular to the disc plane. In addition, our images reveal a curved southwestern emission nebula whose morphology resembles that of the previously detected northeastern one. Both nebulae are located at a distance of 1500 AU from the disc centre. We describe the infrared point-source in terms of a protostar that is embedded in circumstellar material producing a visual extinction of 60 <= Av <= 82. The observed Ks band magnitude is equivalent to a stellar mass range of 2.8 Msun <= Mstar <= 8 Msun adopting conversions for a main-sequence star. Altogether, we suggest that the large M 17 accretion disc is forming an intermediate to high-mass protostar. Part of the accreted material is expelled through a symmetric bipolar jet/outflow.Comment: 6 pages, 3 figures, accepted by MNRAS (16 May 2008

Photometric reverberation mapping of 3C120

We present the results of a five month monitoring campaign of the local active galactic nuclei (AGN) 3C120. Observations with a median sampling of two days were conducted with the robotic 15cm telescope VYSOS-6 located near Cerro Armazones in Chile. Broad band (B,V) and narrow band (NB) filters were used in order to measure fluxes of the AGN and the H_beta broad line region (BLR) emission line. The NB flux is constituted by about 50% continuum and 50% H_beta emission line. To disentangle line and continuum flux, a synthetic H_beta light curve was created by subtracting a scaled V-band light curve from the NB light curve. Here we show that the H_beta emission line responds to continuum variations with a rest frame lag of 23.6 +/- 1.69 days. We estimate a virial mass of the central black hole M_BH = 57 +/- 27 * 10^6 solar masses, by combining the obtained lag with the velocity dispersion of a single contemporaneous spectrum. Using the flux variation gradient (FVG) method, we determined the host galaxy subtracted rest frame 5100A luminosity at the time of our monitoring campaign with an uncertainty of 10% (L_AGN = 6.94 +/- 0.71* 10^43 ergs^-1). Compared with recent spectroscopic reverberation results, 3C120 shifts in the R_BLR - L_AGN diagram remarkably close to the theoretically expected relation of R-L^0.5. Our results demonstrate the performance of photometric AGN reverberation mapping, in particular for efficiently determining the BLR size and the AGN luminosityComment: 11 pages, 11 figures, Published in Astronomy and Astrophysic

Circumstellar Disks revealed by HH/KK Flux Variation Gradients

The variability of young stellar objects (YSO) changes their brightness and color preventing a proper classification in traditional color-color and color magnitude diagrams. We have explored the feasibility of the flux variation gradient (FVG) method for YSOs, using $H$ and $K$ band monitoring data of the star forming region RCW\,38 obtained at the University Observatory Bochum in Chile. Simultaneous multi-epoch flux measurements follow a linear relation $F_{H}=\alpha + \beta \cdot F_{K}$ for almost all YSOs with large variability amplitude. The slope $\beta$ gives the mean $HK$ color temperature $T_{var}$ of the varying component. Because $T_{var}$ is hotter than the dust sublimation temperature, we have tentatively assigned it to stellar variations. If the gradient does not meet the origin of the flux-flux diagram, an additional non- or less-varying component may be required. If the variability amplitude is larger at the shorter wavelength, e.g. $\alpha < 0$, this component is cooler than the star (e.g. a circumstellar disk); vice versa, if $\alpha > 0$, the component is hotter like a scattering halo or even a companion star. We here present examples of two YSOs, where the $HK$ FVG implies the presence of a circumstellar disk; this finding is consistent with additional data at $J$ and $L$. One YSO shows a clear $K$-band excess in the $JHK$ color-color diagram, while the significance of a $K$-excess in the other YSO depends on the measurement epoch. Disentangling the contributions of star and disk it turns out that the two YSOs have huge variability amplitudes ($\sim 3-5$\,mag). The $HK$ FVG analysis is a powerful complementary tool to analyze the varying components of YSOs and worth further exploration of monitoring data at other wavelengths.Comment: 5 pages, 5 figures, accepted for publication in Astronomy and Astrophysic

Finite element inversion of DInSAR data from the Mw 6.3 L’Aquila earthquake, 2009 (Italy)

Fault slip distribution is usually retrieved from geodetic data assuming that the local crust is an elastic, homogeneous and isotropic half‐space. In the last decades spatially dense geodetic data (e.g., DInSAR maps) have highlighted complex patterns of coseismic deformation that require new modeling tools, such as numerical methods, able to represent rheological and geometrical complexities of the Earth’s crust. In this work, we develop a procedure to perform inversion of geodetic data based on the finite element method, accounting for a more realistic description of the local crust. The method is applied to the 2009 L’Aquila earthquake (Mw 6.3), using DInSAR images of the coseismic displacement. Results highlight the non‐negligible influence of the medium structure: homogeneous and heterogeneous models show discrepancies up to 20% in the fault slip distribution values. Furthermore, in the heterogeneous models a new area of slip appears above the hypocenter. We also perform a resolution study, showing that the information about fault slip distributions retrieved from geodetic data should be considered as averaged on surrounding patches

Contribution of Extragalactic Infrared Sources to CMB Foreground Anisotropy

We estimate the level of confusion to Cosmic Microwave Background anisotropy measurements caused by extragalactic infrared sources. CMB anisotropy observations at high resolution and high frequencies are especially sensitive to this foreground. We use data from the COBE satellite to generate a Galactic emission spectrum covering mm and sub-mm wavelengths. Using this spectrum as a template, we predict the microwave emission of the 5319 brightest infrared galaxies seen by IRAS. We simulate skymaps over the relevant range of frequencies (30-900 GHz) and instrument resolutions (10'-10 degrees Full Width Half Max). Analysis of the temperature anisotropy of these skymaps shows that a reasonable observational window is available for CMB anisotropy measurements.Comment: 14 pages (LaTex source), 3 PostScript figures. Final version, to appear in ApJLetters May 1. Expanded discussion of systematic error

The variable stellar wind of Rigel probed at high spatial and spectral resolution

We present a spatially resolved, high-spectral resolution (R=12000) K-band temporal monitoring of Rigel using AMBER at the VLTI. Rigel was observed in the Bracket Gamma line and its nearby continuum in 2006-2007, and 2009-2010. These unprecedented observations were complemented by contemporaneous optical high-resolution spectroscopy. We analyse the near-IR spectra and visibilities with the 1D non-LTE radiative-transfer code CMFGEN. The differential and closure phase signal exhibit asymmetries that are interpreted as perturbations of the wind. A systematic visibility decrease is observed across the Bracket Gamma. During the 2006-2007 period the Bracket Gamma and likely the continuum forming regions were larger than in the 2009-2010 epoch. Using CMFGEN, we infer a mass-loss rate change of about 20% between the two epochs. We further find time variations in the differential visibilities and phases. The 2006-2007 period is characterized by noticeable variations of the differential visibilities in Doppler position and width and by weak variations in differential and closure phase. The 2009-2010 period is much more quiet with virtually no detectable variations in the dispersed visibilities but a strong S-shape signal is observed in differential phase coinciding with a strong ejection event discernible in the optical spectra. The differential phase signal that is sometimes detected is reminiscent of the signal computed from hydrodynamical models of corotating interaction regions. For some epochs the temporal evolution of the signal suggests the rotation of the circumstellar structures.Comment: Paper accepted in the A&A journa

Modelling photometric reverberation data -- a disk-like broad-line region and a potentially larger black hole mass for 3C120

We consider photometric reverberation mapping, where the nuclear continuum variations are monitored via a broad-band filter and the echo of emission line clouds of the broad line region (BLR) is measured with a suitable narrow-band (NB) filter. We investigate how an incomplete emission-line coverage by the NB filter influences the BLR size determination. This includes two basic cases: 1) a symmetric cut of the blue and red part of the line wings, and 2) the filter positioned asymmetrically to the line centre so that essentially a complete half of the emission line is contained in the NB filter. Under the assumption that the BLR size is dominated by circular Keplerian orbits, we find that symmetric cutting of line wings may lead to overestimating the BLR size by less than 5%. The case of asymmetric half-line coverage, similar as for our data of the Seyfert 1 galaxy 3C120, yields the BLR size with a bias of less than 1%. Our results suggest that any BLR size bias due to narrow-band line cut in photometric reverberation mapping is small and in most cases negligible. We used well sampled photometric reverberation mapping light curves with sharp variation features in both the continuum and the Hbeta light curves to determine the geometry type of the Hbeta BLR for 3C120. Modelling of the light curve, under the assumption that the BLR is essentially virialised, argues against a spherical geometry and favours a nearly face-on disk-like geometry with inclination i = 10 +/- 4 deg and extension from 22 to 28 light days. The low inclination may lead to a larger black hole mass than the derived when using the average geometry scaling factor f=5.5. We discuss deviations of Seyfert 1 galaxies from the M_BH - sigma relation.Comment: 9 pages, 11 figures, accepted for publication in Astronomy and Astrophysic

Installation and data analysis of a small network of SAR corner reflectors in Fogo, Cape Verde

Since early ninety’s Synthetic Aperture Radar Interferometry (InSAR) has been exploited for geophysical applications. InSAR technique is capable to capture information on surface deformation and can be a useful tool for monitoring active seismic and volcanic areas. Despite the capability of SAR sensors to operate in all weather and day/night conditions, SAR signal is affected by different source of noise (e.g. water vapour or instrumental noise) [Hanssen, 2001]. These disturbing sources affect the accuracy of InSAR deformation map, especially for time series analysis, and the quality control of InSAR measurements, either standard differential interferometry and Persistent Scatterers Interferometry (PSI), is not an easy task. A fruitful solution is represented by the adoption of passive Corner Reflectors (CRs). CRs can provide point measurements with high level of confidence with sub-centimeter accuracy [Marinkovic et al, 2007], thanks to their high backscattered signal value, and representing strong persistent scatterers to be used for calibrating and validating SAR (from InSAR and PSI technique) deformation map. Indeed, CRs can maintain their interferometric phase stable during time. Additionally, CRs can also be exploited to calibrate the amplitude SAR signal, and to provide reference points for geocoding purposes. Here we present the design, realization and installation of a small CRs network on the Fogo Volcano island, Cape Verde. This activity has been done in the framework of the European project MIAVITA, MItigate and Assess risk from Volcanic Impact on Terrain and human Activities

Reduced description of exact coherent states in parallel shear flows

A reduced description of exact coherent structures in the transition regime of plane parallel shear flows is developed, based on the Reynolds number scaling of streamwise-averaged (mean) and streamwise-varying (fluctuation) velocities observed in numerical simulations. The resulting system is characterized by an effective unit Reynolds number mean equation coupled to linear equations for the fluctuations, regularized by formally higher-order diffusion. Stationary coherent states are computed by solving the resulting equations simultaneously using a robust numerical algorithm developed for this purpose. The algorithm determines self-consistently the amplitude of the fluctuations for which the associated mean flow is just such that the fluctuations neither grow nor decay. The procedure is used to compute exact coherent states of a flow introduced by Drazin and Reid [Hydrodynamic Stability (Cambridge University Press, Cambridge, UK, 1981)] and studied by Waleffe [Phys. Fluids 9, 883 (1997)]: a linearly stable, plane parallel shear flow confined between stationary stress-free walls and driven by a sinusoidal body force. Numerical continuation of the lower-branch states to lower Reynolds numbers reveals the presence of a saddle node; the saddle node allows access to upper-branch states that are, like the lower-branch states, self-consistently described by the reduced equations. Both lower- and upper-branch states are characterized in detail