Biodegradable soy protein-based tablets for the controlled release of zinc

[EN] Controlled-release systems are gaining interest in the horticultural industry to supply fertilizers to crops. However, their manufacturing process increases their cost, making its industrialization difficult. In this context, compaction of powders could be a low-cost and easily industrializable alternative. Thus, the main objective of this work was the manufacture of soy protein-based tablets with zinc (micronutrient) incorporated using different compaction parameters (pressure: 333, 416 and 777 MPa; post-manufacture heat treatment: 4 and 24 h). Thus, the mechanical (dynamic compression tests) and microstructural properties (SEM and grain number) of the different tablets were evaluated to study the effect of pressure and temperature on them. In addition, water uptake capacity and micronutrient release were studied. The latter has been analyzed with the use of two theoretical models (Higuchi and Korsmeyer-Peppas) to evaluate which model is the most accurate for predicting the zinc release of the different tablets. The results presented in this work demonstrate the great utility of soy protein-based tablets for the controlled release of zinc. Thus, this process allows the incorporation of 116 g of Zn in a kg product that can be released under control (9–10 h in water). These products have great industrial potential due to their ease of processing and properties, making them economically competitive.SIPublicación en abierto financiada por el Consorcio de Bibliotecas Universitarias de Castilla y León (BUCLE), con cargo al Programa Operativo 2014ES16RFOP009 FEDER 2014-2020 DE CASTILLA Y LEÓN, Actuación:20007-CL - Apoyo Consorcio BUCL

Association of a single nucleotide polymorphism combination pattern of the Klotho gene with non-cardiovascular death in patients with chronic kidney disease

Chronic kidney disease (CKD) is associated with an elevated risk of all-cause mortality, with cardiovascular death being extensively investigated. However, non-cardiovascular mortality represents the biggest percentage, showing an evident increase in recent years. Klotho is a gene highly expressed in the kidney, with a clear influence on lifespan. Low levels of Klotho have been linked to CKD progression and adverse outcomes. Single nucleotide polymorphisms (SNPs) of the Klotho gene have been associated with several diseases, but studies investigating the association of Klotho SNPs with noncardiovascular death in CKD populations are lacking. The main aim of this study was to assess whether 11 Klotho SNPs were associated with non-cardiovascular death in a subpopulation of the National Observatory of Atherosclerosis in Nephrology (NEFRONA) study (n ¼ 2185 CKD patients). After 48 months of follow-up, 62 cardiovascular deaths and 108 non-cardiovascular deaths were recorded. We identified a high non-cardiovascular death risk combination of SNPs corresponding to individuals carrying the most frequent allele (G) at rs562020, the rare allele (C) at rs2283368 and homozygotes for the rare allele (G) at rs2320762 (rs562020 GG/AG þ rs2283368 CC/CT þ rs2320762 GG). Among the patients with the three SNPs genotyped (n ¼ 1016), 75 (7.4%) showed this combination. Furthermore, 95 (9.3%) patients showed a low-risk combination carrying all the opposite genotypes (rs562020 AA þ rs2283368 TT þ rs2320762 GT/TT). All the other combinations [n ¼ 846 (83.3%)] were considered as normal risk. Using competing risk regression analysis, we confirmed that the proposed combinations are independently associated with a higher fhazard ratio [HR] 3.28 [confidence interval (CI) 1.51-7.12]g and lower [HR 6 × 10- (95% CI 3.3 × 10--1.1 × 10-)] risk of suffering a non-cardiovascular death in the CKD population of the NEFRONA cohort compared with patients with the normal-risk combination. Determination of three SNPs of the Klotho gene could help in the prediction of non-cardiovascular death in CKD

Characterization of Gelatin-Polycaprolactone Membranes by Electrospinning

New advances in materials science and medicine have enabled the development of new and increasingly sophisticated biomaterials. One of the most widely used biopolymers is polycaprolactone (PCL) because it has properties suitable for biomedical applications, tissue engineering scaffolds, or drug delivery systems. However, PCL scaffolds do not have adequate bioactivity, and therefore, alternatives have been studied, such as mixing PCL with bioactive polymers such as gelatin, to promote cell growth. Thus, this work will deal with the fabrication of nanofiber membranes by means of the electrospinning technique using PCL-based solutions (12 wt.% and 20 wt.%) and PCL with gelatin (12 wt.% and 8 wt.%, respectively). Formic acid and acetic acid, as well as mixtures of both in different proportions, have been used to prepare the preliminary solutions, thus supporting the electrospinning process by controlling the viscosity of the solutions and, therefore, the size and uniformity of the fibers. The physical properties of the solutions and the morphological, mechanical, and thermal properties of the membranes were evaluated. Results demonstrate that it is possible to achieve the determined properties of the samples with an appropriate selection of polymer concentrations as well as solvents

Valorization of Honduran Agro-Food Waste to Produce Bioplastics

The development of biodegradable plastics and eco-friendly biomaterials derived from renewable resources is crucial for reducing environmental damage. Agro-industrial waste and rejected food can be polymerized into bioplastics, offering a sustainable solution. Bioplastics find use in various industries, including for food, cosmetics, and the biomedical sector. This research investigated the fabrication and characterization of bioplastics using three types of Honduran agro-wastes: taro, yucca, and banana. The agro-wastes were stabilized and characterized (physicochemically and thermically). Taro flour presented the highest protein content (around 4.7%) and banana flour showed the highest moisture content (around 2%). Furthermore, bioplastics were produced and characterized (mechanically and functionally). Banana bioplastics had the best mechanical properties, with a Young’s modulus around 300 MPa, while taro bioplastics had the highest water-uptake capacity (200%). In general, the results showed the potential of these Honduran agro-wastes for producing bioplastics with different characteristics that could add value to these wastes, promoting the circular economy