The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR, browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters. Finally we briefly discuss on the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, and touch on communication and outreach activities, the consortium organisation, and finally on the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. (abridged).Comment: 48 pages, 29 figures, Accepted for publication in Experimental Astronomy with minor editin

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory. Athena is a versatile observatory designed to address the Hot and Energetic Universe science theme, as selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), X-IFU aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over a hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR (i.e. in the course of its preliminary definition phase, so-called B1), browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters, such as the instrument efficiency, spectral resolution, energy scale knowledge, count rate capability, non X-ray background and target of opportunity efficiency. Finally, we briefly discuss the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, touch on communication and outreach activities, the consortium organisation and the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with ESA member state contributions from Belgium, Czech Republic, Finland, Germany, Poland, Spain, Switzerland, with additional contributions from the United States and Japan.The French contribution to X-IFU is funded by CNES, CNRS and CEA. This work has been also supported by ASI (Italian Space Agency) through the Contract 2019-27-HH.0, and by the ESA (European Space Agency) Core Technology Program (CTP) Contract No. 4000114932/15/NL/BW and the AREMBES - ESA CTP No.4000116655/16/NL/BW. This publication is part of grant RTI2018-096686-B-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This publication is part of grant RTI2018-096686-B-C21 and PID2020-115325GB-C31 funded by MCIN/AEI/10.13039/501100011033

Performance of the CMS Level-1 trigger in proton-proton collisions at √s = 13 TeV

At the start of Run 2 in 2015, the LHC delivered proton-proton collisions at a center-of-mass energy of 13\TeV. During Run 2 (years 2015–2018) the LHC eventually reached a luminosity of 2.1× 10$^{34}$ cm$^{-2}$s$^{-1}$, almost three times that reached during Run 1 (2009–2013) and a factor of two larger than the LHC design value, leading to events with up to a mean of about 50 simultaneous inelastic proton-proton collisions per bunch crossing (pileup). The CMS Level-1 trigger was upgraded prior to 2016 to improve the selection of physics events in the challenging conditions posed by the second run of the LHC. This paper describes the performance of the CMS Level-1 trigger upgrade during the data taking period of 2016–2018. The upgraded trigger implements pattern recognition and boosted decision tree regression techniques for muon reconstruction, includes pileup subtraction for jets and energy sums, and incorporates pileup-dependent isolation requirements for electrons and tau leptons. In addition, the new trigger calculates high-level quantities such as the invariant mass of pairs of reconstructed particles. The upgrade reduces the trigger rate from background processes and improves the trigger efficiency for a wide variety of physics signals

Studies of charm and beauty hadron long-range correlations in pp and pPb collisions at LHC energies

Measurements of the second Fourier harmonic coefficient (v(2)) of the azimuthal distributions of prompt and nonprompt D-0 mesons produced in pp and pPb collisions are presented. Nonprompt D-0 mesons come from beauty hadron decays. The data samples are collected by the CMS experiment at nucleon-nucleon center-of-mass energies of 13 and 8.16 TeV, respectively. In high multiplicity pp collisions, v(2) signals for prompt charm hadrons are reported for the first time, and are found to be comparable to those for light-flavor hadron species over a transverse momentum (pT) range of 2-6 GeV. Compared at similar event multiplicities, the prompt D-0 meson v(2) values in pp and pPb collisions are similar in magnitude. The v(2) values for open beauty hadrons are extracted for the first time via nonprompt D-0 mesons in pPb collisions. For pT in the range of 2-5 GeV, the results suggest that v(2) for nonprompt D-0 mesons is smaller than that for prompt D-0 mesons. These new measurements indicate a positive charm hadron v(2) in pp collisions and suggest a mass dependence in v(2) between charm and beauty hadrons in the pPb system. These results provide insights into the origin of heavy-flavor quark collectivity in small systems. (C) 2020 The Author(s). Published by Elsevier B.V.Peer reviewe

Performance of the CMS Level-1 trigger in proton-proton collisions at √s = 13 TeV

Peer reviewe

X-IFU/Athena view of the most distant galaxy clusters in the Universe

International audienceThe X-ray Integral Field Unit (X-IFU) on-board the second large ESA mission "Athena" will be a high spatial (5") and spectral (2.5eV) resolution X-ray imaging spectrometer, operating in the 0.2-12 keV energy band. It will address the science question of the assembly and evolution through cosmic time of the largest halos of matter in the Universe, groups and clusters of galaxies. To this end, we present an on-going feasibility study to demonstrate the X-IFU capabilities to unveil the physics of massive halos at their epoch of formation. Starting from a distant (z=2) group of galaxies (M500 = 7 10^13 M⊙/h) extracted from the HYDRANGEA cosmological and hydrodynamical numerical simulations, we perform an end-to-end simulation of X-IFU observations. From the reconstruction of the global, 1D and 2D quantities, we plan to investigate the various X-IFU science cases for clusters of galaxies, such as the chemical enrichment of the intra-cluster medium (ICM), the dynamical assembly of groups and clusters and the impact of feedback from galaxy and super-massive black hole evolution

X-IFU/Athena view of the most distant galaxy clusters in the Universe

International audienceThe X-ray Integral Field Unit (X-IFU) on-board the second large ESA mission "Athena" will be a high spatial (5") and spectral (2.5eV) resolution X-ray imaging spectrometer, operating in the 0.2-12 keV energy band. It will address the science question of the assembly and evolution through cosmic time of the largest halos of matter in the Universe, groups and clusters of galaxies. To this end, we present an on-going feasibility study to demonstrate the X-IFU capabilities to unveil the physics of massive halos at their epoch of formation. Starting from a distant (z=2) group of galaxies (M500 = 7 10^13 M⊙/h) extracted from the HYDRANGEA cosmological and hydrodynamical numerical simulations, we perform an end-to-end simulation of X-IFU observations. From the reconstruction of the global, 1D and 2D quantities, we plan to investigate the various X-IFU science cases for clusters of galaxies, such as the chemical enrichment of the intra-cluster medium (ICM), the dynamical assembly of groups and clusters and the impact of feedback from galaxy and super-massive black hole evolution

X-IFU/Athena view of the most distant galaxy clusters in the Universe

International audienceThe X-ray Integral Field Unit (X-IFU) on-board the second large ESA mission "Athena" will be a high spatial (5") and spectral (2.5eV) resolution X-ray imaging spectrometer, operating in the 0.2-12 keV energy band. It will address the science question of the assembly and evolution through cosmic time of the largest halos of matter in the Universe, groups and clusters of galaxies. To this end, we present an on-going feasibility study to demonstrate the X-IFU capabilities to unveil the physics of massive halos at their epoch of formation. Starting from a distant (z=2) group of galaxies (M500 = 7 10^13 M⊙/h) extracted from the HYDRANGEA cosmological and hydrodynamical numerical simulations, we perform an end-to-end simulation of X-IFU observations. From the reconstruction of the global, 1D and 2D quantities, we plan to investigate the various X-IFU science cases for clusters of galaxies, such as the chemical enrichment of the intra-cluster medium (ICM), the dynamical assembly of groups and clusters and the impact of feedback from galaxy and super-massive black hole evolution

A 50 mK test bench for demonstration of the readout chain of Athena/X-IFU

International audienceThe X-IFU (X-ray Integral Field Unit) onboard the large ESA mission Athena (Advanced Telescope for High ENergy Astrophysics), planned to be launched in the mid 2030s, will be a cryogenic X-ray imaging spectrometer operating at 55 mK. It will provide unprecedented spatially resolved high-resolution spectroscopy (2.5 eV FWHM up to 7 keV) in the 0.2-12 keV energy range thanks to its array of TES (Transition Edge Sensors) microcalorimeters of more than 2k pixel. The detection chain of the instrument is developed by an international collaboration: the detector array by NASA/GSFC, the cold electronics by NIST, the cold amplifier by VTT, the WFEE (Warm Front-End Electronics) by APC, the DRE (Digital Readout Electronics) by IRAP and a focal plane assembly by SRON. To assess the operation of the complete readout chain of the X-IFU, a 50 mK test bench based on a kilo-pixel array of microcalorimeters from NASA/GSFC has been developed at IRAP in collaboration with CNES. Validation of the test bench has been performed with an intermediate detection chain entirely from NIST and Goddard. Next planned activities include the integration of DRE and WFEE prototypes in order to perform an end-to-end demonstration of a complete X-IFU detection chain