Unstable and elusive superconductors

We briefly review earlier and report original experimental results in the context of metastable or possible superconducting materials. We show that applied electric field induces conducting state in Copper Chloride (CuCl) whose characteristics resemble behavior of sliding charge-density-wave(s) (CDW). We discuss whether the sliding CDW or collective transport of similar ordered charge phase(s) may account for the problem of "high-temperature superconductivity" observed in this and other materials, including Cadmium Sulfide (CdS), metal-ammonia solutions, polymers, amorphous carbon and tungsten oxides. We also discuss a local superconductivity that occurs at the surface of graphite and amorphous carbon under deposition of foreign atoms/molecules.Comment: Invited review article published in a special edition on Superconducting Materials in honor of the 95th birthday year of Ted Geballe, edited by M. B. Maple, J. Hirsch, and F. Marsigli

Methodology to evaluate dripper sensitivity to clogging due to solid particles: an assessment

Emitter clogging is a major problem in microirrigation systems, which may result from the isolated or combined efects of physical, chemical, and biological agents. Clogging caused by suspended solid particles is the most common plugging form of emitters. Water quality and emitter geometry are key aspects in clogging processes. Any suitable test procedure to assess the sensitivity of drippers to clogging should take into account the predominant factors that infuence clogging and must reproduce the feld conditions. Tis research set out to assess the performance and suitability of a laboratory clogging test procedure in order to validate a methodology and to provide scientifc results that may support the standardization of a clogging test method. Te evaluated methodology has been used by the IRSTEA laboratory since 1974 (Platform of Research and experiment on Science and Technology for Irrigation - PReSTI, formerly LERMI) and its contents are currently being discussed by the ISO TC23/SC18 committee. Te aim is to defne a standardized testing protocol to evaluate the sensitivity of emitters to clogging due to solid particles. Replications analyzing the clogging resistance of four models of emitting pipes were carried out in a laboratory.Te clogging test procedure enabled an accurate assessment of the combinations of concentration and size of particles that caused clogging in each model of dripper. However, a signifcant variability in degree of clogging was identifed when the results of replications for each model of dripper were compared. Several requirements, concerns, and improvements related to the clogging test protocol were discussed.2018FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP2015/19630-

Multi-walled carbon nanotubes/carbon black/rPLA for high-performance conductive additive manufacturing filament and the simultaneous detection of acetaminophen and phenylephrine

The combination of multi-walled carbon nanotubes (MWCNT) and carbon black (CB) is presented to produce a high-performance electrically conductive recycled additive manufacturing filament. The filament and subsequent additively manufactured electrodes were characterised by TGA, XPS, Raman, and SEM and showed excellent low-temperature flexibility. The MWCNT/CB filament exhibited an improved electrochemical performance compared to an identical in-house produced bespoke filament using only CB. A heterogeneous electrochemical rate constant, of 1.71 (± 0.19) × 10−3 cm s−1 was obtained, showing an almost six times improvement over the commonly used commercial conductive CB/PLA. The filament was successfully tested for the simultaneous determination of acetaminophen and phenylephrine, producing linear ranges of 5–60 and 5–200 μM, sensitivities of 0.05 μA μM−1 and 0.14 μA μM−1, and limits of detection of 0.04 μM and 0.38 μM, respectively. A print-at-home device is presented where a removable lid comprised of rPLA can be placed onto a drinking vessel and the working, counter, and reference components made from our bespoke MWCNT/CB filament. The print-at-home device was successfully used to determine both compounds within real pharmaceutical products, with recoveries between 87 and 120% over a range of three real samples. This work paves the way for fabricating new highly conductive filaments using a combination of carbon materials with different morphologies and physicochemical properties and their application to produce additively manufactured electrodes with greatly improved electrochemical performance

The first observed stellar occultations by the irregular satellite Phoebe (Saturn IX) and improved rotational period

peer reviewedWe report six stellar occultations by Phoebe (Saturn IX), an irregular satellite of Saturn, obtained between mid-2017 and mid-2019. The 2017 July 6 event was the first stellar occultation by an irregular satellite ever observed. The occultation chords were compared to a 3D shape model of the satellite obtained from Cassini observations. The rotation period available in the literature led to a sub-observer point at the moment of the observed occultations where the chords could not fit the 3D model. A procedure was developed to identify the correct sub-observer longitude. It allowed us to obtain the rotation period with improved precision compared to the currently known value from literature. We show that the difference between the observed and the predicted sub-observer longitude suggests two possible solutions for the rotation period. By comparing these values with recently observed rotational light curves and single- chord stellar occultations, we can identify the best solution for Phoebe's rotational period as 9.27365 ± 0.00002 h. From the stellar occultations, we also obtained six geocentric astrometric positions in the ICRS as realized by the Gaia DR2 with uncertainties at the 1-mas level

Linking plant phenology to conservation biology

Phenology has achieved a prominent position in current scenarios of global change research given its role inmonitoring and predicting the timing of recurrent life cycle events. However, the implications of phenology to environmental conservation and management remain poorly explored. Here,we present the first explicit appraisal of howphenology-amultidisciplinary science encompassing biometeorology, ecology, and evolutionary biology- can make a key contribution to contemporary conservation biology. We focus on shifts in plant phenology induced by global change, their impacts on species diversity and plant-animal interactions in the tropics, and how conservation efforts could be enhanced in relation to plant resource organization. We identify the effects of phenological changes and mismatches in the maintenance and conservation of mutualistic interactions, and examine how phenological research can contribute to evaluate, manage and mitigate the consequences of land-use change and other natural and anthropogenic disturbances, such as fire, exotic and invasive species. Wealso identify cutting-edge tools that can improve the spatial and temporal coverage of phenological monitoring, from satellites to drones and digital cameras. We highlight the role of historical information in recovering long-term phenological time series, and track climate-related shifts in tropical systems. Finally, we propose a set of measures to boost the contribution of phenology to conservation science.Weadvocate the inclusion of phenology into predictive models integrating evolutionary history to identify species groups that are either resilient or sensitive to future climate-change scenarios, and understand how phenological m ismatches can affect community dynamics, ecosystem services, and conservation over time

Efficient delivery of DNA into bovine preimplantation embryos by multiwall carbon nanotubes.

The pellucid zone (PZ) is a protective embryonic cells barrier against chemical, physical or biological substances. This put, usual transfection methods are not efficient for mammal oocytes and embryos as they are exclusively for somatic cells. Carbon nanotubes have emerged as a new method for gene delivery, and they can be an alternative for embryos transfection, however its ability to cross the PZ and mediated gene transfer is unknown. Our data confirm that multiwall carbon nanotubes (MWNTs) can cross the PZ and delivery of pDNA into in vitro-fertilized bovine embryos. The degeneration rate and the expression of genes associated to cell viability were not affected in embryos exposed to MWNTs. Those embryos, however, had lower cell number and higher apoptotic cell index, but this did not impair the embryonic development. This study shows the potential utility of the MWNT for the development of new method for delivery of DNA into bovine embryos

Rarity of monodominance in hyperdiverse Amazonian forests.

Tropical forests are known for their high diversity. Yet, forest patches do occur in the tropics where a single tree species is dominant. Such "monodominant" forests are known from all of the main tropical regions. For Amazonia, we sampled the occurrence of monodominance in a massive, basin-wide database of forest-inventory plots from the Amazon Tree Diversity Network (ATDN). Utilizing a simple defining metric of at least half of the trees ≥ 10 cm diameter belonging to one species, we found only a few occurrences of monodominance in Amazonia, and the phenomenon was not significantly linked to previously hypothesized life history traits such wood density, seed mass, ectomycorrhizal associations, or Rhizobium nodulation. In our analysis, coppicing (the formation of sprouts at the base of the tree or on roots) was the only trait significantly linked to monodominance. While at specific locales coppicing or ectomycorrhizal associations may confer a considerable advantage to a tree species and lead to its monodominance, very few species have these traits. Mining of the ATDN dataset suggests that monodominance is quite rare in Amazonia, and may be linked primarily to edaphic factors

Constraints on Charon's Orbital Elements from the Double Stellar Occultation of 2008 June 22

The original publication is available at http://iopscience.iop.org/1538-3881/International audiencePluto and its main satellite, Charon, occulted the same star on 2008 June 22. This event was observed from Australia and La Réunion Island, providing the east and north Charon Plutocentric offset in the sky plane (J2000): X= + 12,070.5 ± 4 km (+ 546.2 ± 0.2 mas), Y= + 4,576.3 ± 24 km (+ 207.1 ± 1.1 mas) at 19:20:33.82 UT on Earth, corresponding to JD 2454640.129964 at Pluto. This yields Charon's true longitude L= 153.483 ± 0fdg071 in the satellite orbital plane (counted from the ascending node on J2000 mean equator) and orbital radius r= 19,564 ± 14 km at that time. We compare this position to that predicted by (1) the orbital solution of Tholen & Buie (the "TB97" solution), (2) the PLU017 Charon ephemeris, and (3) the solution of Tholen et al. (the "T08" solution). We conclude that (1) our result rules out solution TB97, (2) our position agrees with PLU017, with differences of ΔL= + 0.073 ± 0fdg071 in longitude, and Δr= + 0.6 ± 14 km in radius, and (3) while the difference with the T08 ephemeris amounts to only ΔL= 0.033 ± 0fdg071 in longitude, it exhibits a significant radial discrepancy of Δr= 61.3 ± 14 km. We discuss this difference in terms of a possible image scale relative error of 3.35 × 10-3in the 2002-2003 Hubble Space Telescope images upon which the T08 solution is mostly based. Rescaling the T08 Charon semi-major axis, a = 19, 570.45 km, to the TB97 value, a = 19636 km, all other orbital elements remaining the same ("T08/TB97" solution), we reconcile our position with the re-scaled solution by better than 12 km (or 0.55 mas) for Charon's position in its orbital plane, thus making T08/TB97 our preferred solution