467 research outputs found
Regional Flow Simulation in Fractured Aquifers Using Stress-Dependent Parameters
A model function relating effective stress to fracture permeability is
developed from Hooke's law, implemented in the tensorial form of Darcy's law,
and used to evaluate discharge rates and pressure distributions at regional
scales. The model takes into account elastic and statistical fracture
parameters, and is able to simulate real stress-dependent permeabilities from
laboratory to field studies. This modeling approach gains in phenomenology in
comparison to the classical ones because the permeability tensors may vary in
both strength and principal directions according to effective stresses.
Moreover this method allows evaluation of the fracture porosity changes, which
are then translated into consolidation of the medium.Comment: 10 pages, 7 figures, submitted to Ground Water 201
Simulating spatial and temporal evolution of multiple wing cracks around faults in crystalline basement rocks
Fault zones are structurally highly spatially heterogeneous and hence extremely complex. Observations of fluid flow through fault zones over several scales show that this structural complexity is reflected in the hydrogeological properties of faults. Information on faults at depth is scarce, hence, it is highly valuable to understand the controls on spatial and temporal fault zone development. In this paper we increase our understanding of fault damage zone development in crystalline rocks by dynamically simulating the growth of single and multiple splay fractures produced from failure on a pre-existing fault. We present a new simulation model, MOPEDZ (Modeling Of Permeability Evolution in the Damage Zone surrounding faults), that simulates fault evolution through solution of Navier's equation with a combined Mohr-Coulomb and tensile failure criteria. Simulations suggest that location, frequency, mode of failure and orientation of splay fractures are significantly affected both by the orientation of the fault with respect to the maximum principal compressive stress and the conditions of differential stress. Model predictions compare well with published field outcrop data, confirming that this model produces realistic damage zone geometries
Testing the viability of measuring intraocular pressure using soundwaves from a smartphone
Abstract Early detection of increasing values of intraocular pressure (IOP) due to glaucoma can prevent severe ocular diseases and ultimately, prevent loss of vision. Currently, the need for an accurate, mobile measurement of IOP that shows no correlation to central corneal thickness is unmet within the modern healthcare practices. There is a potential to utilize soundwaves as a mobile measurement method and therefore, the relationship between IOP and the reflection coefficient of sound waves is investigated. Simulations are conducted using COMSOL Multiphysics to provide theoretical confirmation of the worthiness of the experiment. An experiment is conducted to further investigate the relationship between the internal pressure of an object and its acoustic reflection coefficient. The experiment exploits the use of hydrostatic pressure to determine internal pressure, and the reflection coefficient is measured and analyzed. An initial experiment is conducted to identify the resonant frequency of the object and the optimal frequency for maximizing reflection. The experiment shows comprehensively that there is a relationship between the internal pressure of an object and its acoustic reflection coefficient, providing a confirmation of the theory that would allow mobile measurements of IOP to be conducted with the use of a smart phone
Thermal design and characterization of a modular integrated liquid cooled 1200 V-35 A SiC MOSFET bi-directional switch
The aim of this work is the thermal design of a modular direct liquid cooled package for 1200 V–35 A SiC power MOSFETs, in order to take full advantage of the high power density and high frequency performance of these devices, in the development of a modular integrated solution for power converters. An accurate electro-thermal fluid dynamic model is set up and validated by thermal characterization on a prototype; numerical models have been used to study the internal temperature distribution and to propose further optimization
A unified potential drop calibration function for common crack growth specimens
Calibration functions, used to determine crack extension from potential drop measurements, are not readily available for many common crack growth specimen types. This restricts testing to a limited number of specimen types, typically resulting in overly conservative material properties being used in residual life assessments. This paper presents a unified calibration function which can be applied to all common crack growth specimen types, mitigating this problem and avoiding the significant costs associated with the current conservative approach. Using finite element analysis, it has been demonstrated that Johnson’s calibration function can be applied to the seven most common crack growth specimen types: C(T), SEN(T), SEN(B), M(T), DEN(T), CS(T) and DC(T). A parametric study has been used to determine the optimum configuration of electrical current inputs and PD probes. Using the suggested configurations, the error in the measurement of crack extension is <6% for all specimen types, which is relatively small compared to other sources of error commonly associated with the potential drop technique
Thermal characteristics of an air‐cooled open‐cathode proton exchange membrane fuel cell stack via numerical investigation
Wave attenuation and dissipation mechanisms in viscoelastic phononic crystals
This work investigates wave attenuation and dissipation mechanisms in viscoelastic phononic crystals (VPCs) having different inclusion types in a long-wavelength regime. After investigating the intrinsic damping properties of VPCs for different inclusion sizes and materials, we carried out wave simulations revealing the energy dissipation by a finite VPC structure inserted inside an elastic medium. The simulations, supported by physical reasoning, showed that air-and metal-embedded VPCs can indeed dissipate more wave energy than pure viscoelastic media in low and high frequency ranges, respectively. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4795285clos
FEM-based oxygen consumption and cell viability models for avascular pancreatic islets
<p>Abstract</p> <p>Background</p> <p>The function and viability of cultured, transplanted, or encapsulated pancreatic islets is often limited by hypoxia because these islets have lost their vasculature during the isolation process and have to rely on gradient-driven passive diffusion, which cannot provide adequate oxygen transport. Pancreatic islets (islets of Langerhans) are particularly susceptible due to their relatively large size, large metabolic demand, and increased sensitivity to hypoxia. Here, finite element method (FEM) based multiphysics models are explored to describe oxygen transport and cell viability in avascular islets both in static and in moving culture media.</p> <p>Methods</p> <p>Two- and three-dimensional models were built in COMSOL Multiphysics using the convection and diffusion as well as the incompressible Navier-Stokes fluid dynamics application modes. Oxygen consumption was assumed to follow Michaelis-Menten-type kinetics and to cease when local concentrations fell below a critical threshold; in a dynamic model, it was also allowed to increase with increasing glucose concentration.</p> <p>Results</p> <p>Partial differential equation (PDE) based exploratory cellular-level oxygen consumption and cell viability models incorporating physiologically realistic assumptions have been implemented for fully scaled cell culture geometries with 100, 150, and 200 <it>μ</it>m diameter islets as representative. Calculated oxygen concentrations and intra-islet regions likely to suffer from hypoxia-related necrosis obtained for traditional flask-type cultures, oxygen-permeable silicone-rubber membrane bottom cultures, and perifusion chambers with flowing media and varying incoming glucose levels are presented in detail illustrated with corresponding colour-coded figures and animations.</p> <p>Conclusion</p> <p>Results of the computational models are, as a first estimate, in good quantitative agreement with existing experimental evidence, and they confirm that during culture, hypoxia is often a problem for non-vascularised islet and can lead to considerable cell death (necrosis), especially in the core region of larger islets. Such models are of considerable interest to improve the function and viability of cultured, transplanted, or encapsulated islets. The present implementation allows convenient extension to true multiphysics applications that solve coupled physics phenomena such as diffusion and consumption with convection due to flowing or moving media.</p
Inverted bi-prism phononic crystals for one-sided elastic wave transmission applications
This work presents the realization of one-sided wave transmission by using a specially engineered phononic crystal structure. It is an inverted bi-prism phononic crystal engineered for a horizontally incident elastic wave at a specific frequency. The incident wave along one direction is shown to be totally reflected by the bi-prism while the incident wave along the opposite direction transmitted through it with refraction, also evident from experiments. An application of the proposed bi-prism may be found in thin elastic strips. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4721485clos
- …