226 research outputs found
Behaviour and design of duplex stainless steel bolted connections failing in block shear
Duplex stainless steel (DSS) is an emerging construction material for structural engineering, which is featured with high mechanical strength and superior corrosion resistance. Compared with considerable research on DSS structural members, available research is relatively limited for structural joints/connections between these members. In line with this concern, this paper presents a comprehensive experimental and numerical study of duplex stainless steel bolted connections (DSSBCs), focusing on the behaviour and design related to block shear failure. Eleven specimens are tested to investigate the effect of different bolt arrangements on the block shear behaviour. Furthermore, a detailed numerical study was performed as a supplement to the experimental tests, where the anisotropic mechanical properties of DSS are considered in the finite element modelling. Based on the test and analysis results, it is found that the block shear failure mode of DSSBCs resembles that of carbon steel bolted connections, which can be characterised as necking of the tensile section and yielding of the shear sections. Using the experimental and numerical data obtained in this and previous studies, the applicability of various block shear design methods to stainless steel bolted connections is assessed. An updated design method is proposed for predicting the block shear capacity of duplex and austenitic stainless steel bolted connections. A proper partial safety factor/resistance factor is suggested for the proposed method based on the results of reliability analyses
Separability and entanglement in 2x3xN composite quantum systems
The separability and entanglement of quantum mixed states in \Cb^2 \otimes
\Cb^3 \otimes \Cb^N composite quantum systems are investigated. It is shown
that all quantum states with positive partial transposes and rank
are separable.Comment: Latex, 15 page
Spectra of Free Diquark in the Bethe-Salpeter Approach
In this work, we employ the Bethe-Salpeter (B-S) equation to investigate the
spectra of free diquarks and their B-S wave functions. We find that the B-S
approach can be consistently applied to study the diqaurks with two heavy
quarks or one heavy and one light quarks, but for two light-quark systems, the
results are not reliable. There are a few free parameters in the whole scenario
which can only be fixed phenomenologically. Thus, to determine them, one has to
study baryons which are composed of quarks and diquarks.Comment: 16 pages, no figure
Mesoscopic models for DNA stretching under force: new results and comparison to experiments
Single molecule experiments on B-DNA stretching have revealed one or two
structural transitions, when increasing the external force. They are
characterized by a sudden increase of DNA contour length and a decrease of the
bending rigidity. It has been proposed that the first transition, at forces of
60--80 pN, is a transition from B to S-DNA, viewed as a stretched duplex DNA,
while the second one, at stronger forces, is a strand peeling resulting in
single stranded DNAs (ssDNA), similar to thermal denaturation. But due to
experimental conditions these two transitions can overlap, for instance for
poly(dA-dT). We derive analytical formula using a coupled discrete worm like
chain-Ising model. Our model takes into account bending rigidity, discreteness
of the chain, linear and non-linear (for ssDNA) bond stretching. In the limit
of zero force, this model simplifies into a coupled model already developed by
us for studying thermal DNA melting, establishing a connexion with previous
fitting parameter values for denaturation profiles. We find that: (i) ssDNA is
fitted, using an analytical formula, over a nanoNewton range with only three
free parameters, the contour length, the bending modulus and the monomer size;
(ii) a surprisingly good fit on this force range is possible only by choosing a
monomer size of 0.2 nm, almost 4 times smaller than the ssDNA nucleobase
length; (iii) mesoscopic models are not able to fit B to ssDNA (or S to ss)
transitions; (iv) an analytical formula for fitting B to S transitions is
derived in the strong force approximation and for long DNAs, which is in
excellent agreement with exact transfer matrix calculations; (v) this formula
fits perfectly well poly(dG-dC) and -DNA force-extension curves with
consistent parameter values; (vi) a coherent picture, where S to ssDNA
transitions are much more sensitive to base-pair sequence than the B to S one,
emerges.Comment: 14 pages, 9 figure
Soil nitrogen concentration mediates the relationship between leguminous trees and neighbor diversity in tropical forests
Legumes provide an essential service to ecosystems by capturing nitrogen from the atmosphere and delivering it to the soil, where it may then be available to other plants. However, this facilitation by legumes has not been widely studied in global tropical forests. Demographic data from 11 large forest plots (16â60âha) ranging from 5.25° S to 29.25° N latitude show that within forests, leguminous trees have a larger effect on neighbor diversity than non-legumes. Where soil nitrogen is high, most legume species have higher neighbor diversity than non-legumes. Where soil nitrogen is low, most legumes have lower neighbor diversity than non-legumes. No facilitation effect on neighbor basal area was observed in either high or low soil N conditions. The legumeâsoil nitrogen positive feedback that promotes tree diversity has both theoretical implications for understanding species coexistence in diverse forests, and practical implications for the utilization of legumes in forest restoration
Heavy quarkonium: progress, puzzles, and opportunities
A golden age for heavy quarkonium physics dawned a decade ago, initiated by
the confluence of exciting advances in quantum chromodynamics (QCD) and an
explosion of related experimental activity. The early years of this period were
chronicled in the Quarkonium Working Group (QWG) CERN Yellow Report (YR) in
2004, which presented a comprehensive review of the status of the field at that
time and provided specific recommendations for further progress. However, the
broad spectrum of subsequent breakthroughs, surprises, and continuing puzzles
could only be partially anticipated. Since the release of the YR, the BESII
program concluded only to give birth to BESIII; the -factories and CLEO-c
flourished; quarkonium production and polarization measurements at HERA and the
Tevatron matured; and heavy-ion collisions at RHIC have opened a window on the
deconfinement regime. All these experiments leave legacies of quality,
precision, and unsolved mysteries for quarkonium physics, and therefore beg for
continuing investigations. The plethora of newly-found quarkonium-like states
unleashed a flood of theoretical investigations into new forms of matter such
as quark-gluon hybrids, mesonic molecules, and tetraquarks. Measurements of the
spectroscopy, decays, production, and in-medium behavior of c\bar{c}, b\bar{b},
and b\bar{c} bound states have been shown to validate some theoretical
approaches to QCD and highlight lack of quantitative success for others. The
intriguing details of quarkonium suppression in heavy-ion collisions that have
emerged from RHIC have elevated the importance of separating hot- and
cold-nuclear-matter effects in quark-gluon plasma studies. This review
systematically addresses all these matters and concludes by prioritizing
directions for ongoing and future efforts.Comment: 182 pages, 112 figures. Editors: N. Brambilla, S. Eidelman, B. K.
Heltsley, R. Vogt. Section Coordinators: G. T. Bodwin, E. Eichten, A. D.
Frawley, A. B. Meyer, R. E. Mitchell, V. Papadimitriou, P. Petreczky, A. A.
Petrov, P. Robbe, A. Vair
Partial Wave Analysis of
BES data on are presented. The
contribution peaks strongly near threshold. It is fitted with a
broad resonance with mass MeV, width MeV. A broad resonance peaking at 2020 MeV is also required
with width MeV. There is further evidence for a component
peaking at 2.55 GeV. The non- contribution is close to phase
space; it peaks at 2.6 GeV and is very different from .Comment: 15 pages, 6 figures, 1 table, Submitted to PL
Measurements of the Mass and Full-Width of the Meson
In a sample of 58 million events collected with the BES II detector,
the process J/ is observed in five different decay
channels: , , (with ), (with
) and . From a combined fit of all five
channels, we determine the mass and full-width of to be
MeV/ and
MeV/.Comment: 9 pages, 2 figures and 4 table. Submitted to Phys. Lett.
A Measurement of Psi(2S) Resonance Parameters
Cross sections for e+e- to hadons, pi+pi- J/Psi, and mu+mu- have been
measured in the vicinity of the Psi(2S) resonance using the BESII detector
operated at the BEPC. The Psi(2S) total width; partial widths to hadrons,
pi+pi- J/Psi, muons; and corresponding branching fractions have been determined
to be Gamma(total)= (264+-27) keV; Gamma(hadron)= (258+-26) keV, Gamma(mu)=
(2.44+-0.21) keV, and Gamma(pi+pi- J/Psi)= (85+-8.7) keV; and Br(hadron)=
(97.79+-0.15)%, Br(pi+pi- J/Psi)= (32+-1.4)%, Br(mu)= (0.93+-0.08)%,
respectively.Comment: 8 pages, 6 figure
Analytical and finite element prediction of Lamb wave scattering at delaminations in quasi-isotropic composite laminates
This paper presents a theoretical and finite element (FE) investigation of the scattering characteristics of the fundamental anti-symmetric (A0) Lamb wave at delaminations in a quasi-isotropic (QI) composite laminate. Analytical models based on the Mindlin plate theory and Born approximation are presented to predict the A0 Lamb wave scattering at a delamination, which is modelled as an inhomogeneity, in an equivalent isotropic model of the QI composite laminate. The results are compared with FE predictions, in which the delamination is modelled as a volume split. The equivalent isotropic model and QI composite laminate are used to investigate the feasibility of the common theoretical approach of modelling the delamination as the inhomogeneity. A good correlation is observed between the theoretical solutions and FE results in the forward scattering amplitudes, but there exists a larger discrepancy in the backward scattering amplitudes. The FE results also show that the fibre direction of the outer laminae has a pronounced influence on the forward and backward scattering amplitudes, which is not predicted by the analytical models.C.T. Ng, M. Veidt, L.R.F. Rose, C.H. Wan
- âŠ