Sintering the beaks of the elevator manufactured by direct metal laser sintering (DMLS) process from Co - Cr alloy

In this paper, two prototypes of dental elevator was made by DMLS process, using a super alloy powder of Co – Cr (ST2724G), with Phenix Systems machine, type PXS & PXM Dental, one with a threaded tail and another with a cylindrical tail. The quality obtained for the elevator is better, thanks to the material used and to the manufacturing process. For the elevator prototypes there were performed some Finite element method (FEM) analysis to identify stress locations and displacements. It was realized corrosion test in artificial saliva Fusayama Meyer (pH 5,5) at temperature of 37 ± 1 °C for 24 hours and remarks the importance of post treatment after DMLS process to obtain a better corrosion resistance in vitro

Cardiovascular diseases and air pollution in Novi Sad, Serbia

Objectives: A large body of evidence has documented that air pollutants have adverse effect on human health as well as on the environment. The aim of this study was to determine whether there was an association between outdoor concentrations of sulfur dioxide (SO2) and nitrogen dioxide (NO2) and a daily number of hospital admissions due to cardiovascular diseases (CVD) in Novi Sad, Serbia among patients aged above 18. Material and Methods: The investigation was carried out during over a 3-year period (from January 1, 2007 to December 31, 2009) in the area of Novi Sad. The number (N = 10 469) of daily CVD (ICD-10: I00-I99) hospital admissions was collected according to patients' addresses. Daily mean levels of NO2 and SO2, measured in the ambient air of Novi Sad via a network of fixed samplers, have been used to put forward outdoor air pollution. Associations between air pollutants and hospital admissions were firstly analyzed by the use of the linear regression in a single polluted model, and then trough a single and multi-polluted adjusted generalized linear Poisson model. Results: The single polluted model (without confounding factors) indicated that there was a linear increase in the number of hospital admissions due to CVD in relation to the linear increase in concentrations of SO2 (p = 0.015; 95% confidence interval (95% CI): 0.144-1.329, R2 = 0.005) and NO2 (p = 0.007; 95% CI: 0.214-1.361, R2 = 0.007). However, the single and multi-polluted adjusted models revealed that only NO2 was associated with the CVD (p = 0.016, relative risk (RR) = 1.049, 95% CI: 1.009-1.091 and p = 0.022, RR = 1.047, 95% CI: 1.007-1.089, respectively). Conclusions: This study shows a significant positive association between hospital admissions due to CVD and outdoor NO2 concentrations in the area of Novi Sad, Serbia

Is diet partly responsible for differences in COVID-19 death rates between and within countries?

Correction: Volume: 10 Issue: 1 Article Number: 44 DOI: 10.1186/s13601-020-00351-w Published: OCT 26 2020Reported COVID-19 deaths in Germany are relatively low as compared to many European countries. Among the several explanations proposed, an early and large testing of the population was put forward. Most current debates on COVID-19 focus on the differences among countries, but little attention has been given to regional differences and diet. The low-death rate European countries (e.g. Austria, Baltic States, Czech Republic, Finland, Norway, Poland, Slovakia) have used different quarantine and/or confinement times and methods and none have performed as many early tests as Germany. Among other factors that may be significant are the dietary habits. It seems that some foods largely used in these countries may reduce angiotensin-converting enzyme activity or are anti-oxidants. Among the many possible areas of research, it might be important to understand diet and angiotensin-converting enzyme-2 (ACE2) levels in populations with different COVID-19 death rates since dietary interventions may be of great benefit.Peer reviewe

Cabbage and fermented vegetables : From death rate heterogeneity in countries to candidates for mitigation strategies of severe COVID-19

Large differences in COVID-19 death rates exist between countries and between regions of the same country. Some very low death rate countries such as Eastern Asia, Central Europe, or the Balkans have a common feature of eating large quantities of fermented foods. Although biases exist when examining ecological studies, fermented vegetables or cabbage have been associated with low death rates in European countries. SARS-CoV-2 binds to its receptor, the angiotensin-converting enzyme 2 (ACE2). As a result of SARS-CoV-2 binding, ACE2 downregulation enhances the angiotensin II receptor type 1 (AT(1)R) axis associated with oxidative stress. This leads to insulin resistance as well as lung and endothelial damage, two severe outcomes of COVID-19. The nuclear factor (erythroid-derived 2)-like 2 (Nrf2) is the most potent antioxidant in humans and can block in particular the AT(1)R axis. Cabbage contains precursors of sulforaphane, the most active natural activator of Nrf2. Fermented vegetables contain many lactobacilli, which are also potent Nrf2 activators. Three examples are: kimchi in Korea, westernized foods, and the slum paradox. It is proposed that fermented cabbage is a proof-of-concept of dietary manipulations that may enhance Nrf2-associated antioxidant effects, helpful in mitigating COVID-19 severity.Peer reviewe

Nrf2-interacting nutrients and COVID-19 : time for research to develop adaptation strategies

There are large between- and within-country variations in COVID-19 death rates. Some very low death rate settings such as Eastern Asia, Central Europe, the Balkans and Africa have a common feature of eating large quantities of fermented foods whose intake is associated with the activation of the Nrf2 (Nuclear factor (erythroid-derived 2)-like 2) anti-oxidant transcription factor. There are many Nrf2-interacting nutrients (berberine, curcumin, epigallocatechin gallate, genistein, quercetin, resveratrol, sulforaphane) that all act similarly to reduce insulin resistance, endothelial damage, lung injury and cytokine storm. They also act on the same mechanisms (mTOR: Mammalian target of rapamycin, PPAR gamma:Peroxisome proliferator-activated receptor, NF kappa B: Nuclear factor kappa B, ERK: Extracellular signal-regulated kinases and eIF2 alpha:Elongation initiation factor 2 alpha). They may as a result be important in mitigating the severity of COVID-19, acting through the endoplasmic reticulum stress or ACE-Angiotensin-II-AT(1)R axis (AT(1)R) pathway. Many Nrf2-interacting nutrients are also interacting with TRPA1 and/or TRPV1. Interestingly, geographical areas with very low COVID-19 mortality are those with the lowest prevalence of obesity (Sub-Saharan Africa and Asia). It is tempting to propose that Nrf2-interacting foods and nutrients can re-balance insulin resistance and have a significant effect on COVID-19 severity. It is therefore possible that the intake of these foods may restore an optimal natural balance for the Nrf2 pathway and may be of interest in the mitigation of COVID-19 severity

Intragastric balloon: is there any place left for It in the treatment of obesity?

Intragastric balloon (IGB) is used in the treatment of obesity for more than 20 years, both as a self-standing procedure and as a bridge treatment to bariatric surgery. The indications and results are well known, due to its characteristics as a non-surgical, endoscopic, minimally invasive and temporary treatment. Recently new models of IGB appeared on the market, and FDA approved for the first time in 2015 two models as treatment of obesity in the United States. Spatz™ Adjustable Balloon System is the first adjustable IGB, tolerated for 12 months, available from 2005. Between 2013-2015 thirty overweighted/obese patients were treated with Spatz3™, maintained in place for approximately 12 months, with a minimum follow-up of 6 months. The results, complications and efficacy of the Spatz3™ balloon are presented, together with an extended review of the literature. IGB represents a useful tool in the treatment of obesity, when patient’s selection is careful done

Platelet-rich plasma PRP vs. absorbable mesh as cruroplasty reinforcement: a study on an animal model

Background: Reinforcement of posterior cruroplasty has been proposed to minimize the failure of hiatal hernia repair (HHR). The applications of autologous platelet-rich plasma (PRP) and absorbable mesh are barely reported in this area. Aims: To analyze local macroscopic and microscopic changes induced by mesh vs. PRP as reinforcement of HHR, using a reliable laparoscopic experimental porcine model. Material and methods: This prospective, comparative pilot study was conducted on 14 female pigs, aged four to six months. An iatrogenic hiatal defect was laparoscopically simulated and repaired, reinforced with Bio-A® mesh (group A) or PRP (group B). Specimen retrieval was performed after seven months for histopathological (HP) examination. Results: No local or general complications were registered, with complete resorption of reinforcements, that determined inflammatory infiltrates with local collagen production and tissue neo-vascularization. Group A had an increased mean chronic inflammation score (p =.3061), showing significant sclerotic collagenizing process. PRP enhanced angiogenesis, collagenizing, myofibroblast recruitment and tissue ingrowth. Conclusions: No residual materials or evidence of anatomical distortion were found. Animal model was safe and reliable. This is the first report of complete absorption of Bio-A® positioned on crural area. HP results suggest the clinical application of PRP in HHR as a promising co-adjuvant to local remodeling and healing. Abbreviations: ASA: American Society of Anesthesiologists; AB: Alcian Blue; PAS: Periodic Acid-Schiff; CP: platelet concentrate; fPC: filtered plasma concentrate; GERD: gastro-esophageal reflux disease; HSA: hiatal surface area; HHR: hiatal hernia repair; HP: histopathological; HH: hiatal hernia; HE: hematoxylin and eosin; HR: hiatus repair alone; HRM: hiatus repair and acellular dermal matrix; NM: Nicolae Manolesccu; LNF: laparoscopic Nissen fundoplication; PC: posterior cruroplasty; PPP: platelet-poor plasma; RP: platelet-rich plasma

Sintering the beaks of the elevator manufactured by direct metal laser sintering (DMLS) process from Co - Cr alloy

In this paper, two prototypes of dental elevator was made by DMLS process, using a super alloy powder of Co – Cr (ST2724G), with Phenix Systems machine, type PXS & PXM Dental, one with a threaded tail and another with a cylindrical tail. The quality obtained for the elevator is better, thanks to the material used and to the manufacturing process. For the elevator prototypes there were performed some Finite element method (FEM) analysis to identify stress locations and displacements. It was realized corrosion test in artificial saliva Fusayama Meyer (pH 5,5) at temperature of 37 ± 1 °C for 24 hours and remarks the importance of post treatment after DMLS process to obtain a better corrosion resistance in vitro