The Gas Sensing Properties of Porphyrins-coated Laterally Grown ZnO Nanorods

AbstractPorphyrins coated ZnO is an interesting material where the exposure to light and gas may cooperate to modulate the respective sensitivities. In this work, the gas sensing properties of porphyrins functionalized laterally grown ZnO nanorods are introduced. The porphyrin layer incompletely coats the semiconductor surface in order to keep both ZnO and porphyrins in contact with analyte. It is known that UV light may prompt the chemical sensitivity of ZnO replacing the high temperature condition. Here we demonstrate that because of the photo-injection of electrons from porphyrin to the ZnO, the same impact could be acquired with visible light

High-resolution velocity measurements on fully identified light nuclides produced in 56Fe + hydrogen and 56Fe + titanium systems

New experimental results on the kinematics and the residue production are obtained for the interactions of 56Fe projectiles with protons and (nat)Ti target nuclei, respectively, at theincident energy of 1 A GeV. The titanium-induced reaction serves as a reference case for multifragmentation. Already in the proton-induced reaction, the characteristics of the isotopic cross sections and the shapes of the velocity spectra of light residues indicate that high thermal energy is deposited in the system during the collision. In the 56Fe+p system the high excitation seems to favour the onset of fast break-up decays dominated by very asymmetric partitions of the disassembling system. This configuration leads to the simultaneous formation of one or more light fragments together with one heavy residue.Comment: 24 pages, 21 figures, 1 table, this work forms part of the PhD thesis of P.Napolitani, background information on http://www-w2k.gsi.de/kschmidt

Controlling the Cassie-to-Wenzel Transition: an Easy Route towards the Realization of Tridimensional Arrays of Biological Objects

In this paper we provide evidence that the Cassie-to-Wenzel transition, despite its detrimental effects on the wetting properties of superhydrophobic surfaces, can be exploited as an effective micro-fabrication strategy to obtain highly ordered arrays of biological objects. To this purpose we fabricated a patterned surface wetted in the Cassie state, where we deposited a droplet containing genomic DNA. We observed that, when the droplet wets the surface in the Cassie state, an array of DNA filaments pinned on the top edges between pillars is formed. Conversely, when the Cassie-to-Wenzel transition occurs, DNA can be pinned at different height between pillars. These results open the way to the realization of tridimensional arrays of biological objects

Blueberry counteracts bv-2 microglia morphological and functional switch after lps challenge

Microglia, the innate immune cells of the CNS, respond to brain injury by activating and modifying their morphology. Our study arises from the great interest that has been focused on blueberry (BB) for the antioxidant and pharmacological properties displayed by its components. We analyzed the influence of hydroalcoholic BB extract in resting or lipopolysaccharide (LPS)-stimulated microglia BV-2 cells. BB exerted a protective effect against LPS-induced cytotoxicity, as indicated by cell viability. BB was also able to influence the actin cytoskeleton organization, to recover the control phenotype after LPS insult, and also to reduce LPS-driven migration. We evaluated the activity of Rho and Rac1 GTPases, which regulate both actin cytoskeletal organization and migratory capacity. LPS caused an increase in Rac1 activity, which was counteracted by BB extract. Furthermore, we demonstrated that, in the presence of BB, mRNA expression of pro-inflammatory cytokines IL-1β, IL-6 and TNF-α decreased, as did the immunofluorescence signal of iNOS, whereas that of Arg-1 was increased. Taken together, our results show that, during the inflammatory response, BB extract shifts the M1 polarization towards the M2 phenotype through an actin cytoskeletal rearrangement. Based on that, we might consider BB as a nutraceutical with anti-inflammatory activities

Measurement of the complete nuclide production and kinetic energies of the system 136Xe + hydrogen at 1 GeV per nucleon

We present an extensive overview of production cross sections and kinetic energies for the complete set of nuclides formed in the spallation of 136Xe by protons at the incident energy of 1 GeV per nucleon. The measurement was performed in inverse kinematics at the FRagment Separator (GSI, Darmstadt). Slightly below the Businaro-Gallone point, 136Xe is the stable nuclide with the largest neutron excess. The kinematic data and cross sections collected in this work for the full nuclide production are a general benchmark for modelling the spallation process in a neutron-rich nuclear system, where fission is characterised by predominantly mass-asymmetric splits.Comment: 18 pages, 14 figure

Fission and cluster decay of 76^{76}Sr nucleus in the ground-state and formed in heavy-ion reactions

Calculations for fission and cluster decay of $^{76}Sr$ are presented for this nucleus to be in its ground-state or formed as an excited compound system in heavy-ion reactions. The predicted mass distribution, for the dynamical collective mass transfer process assumed for fission of $^{76}Sr$, is clearly asymmetric, favouring $\alpha$-nuclei. Cluster decay is studied within a preformed cluster model, both for ground-state to ground-state decays and from excited compound system to the ground-state(s) or excited states(s) of the fragments.Comment: 14 pages LaTeX, 5 Figures available upon request Submitted to Phys. Rev.

A lithographic approach for quantum dot-photonic crystal nanocavity coupling in dilute nitrides

We report on a novel lithographic approach for the fabrication of integrated quantum dot (QD)-photonic crystal (PhC) nanocavity systems. We exploit unique hydrogen's ability to tailor the band gap energy of dilute nitride semiconductors to fabricate isolated site-controlled QDs via a spatially selective hydrogenation at the nanometer-scale. A deterministic integration of the realized site-controlled QDs with PhC nanocavities is provided by the inherent realignment precision (~ 20 nm) of the electron beam lithography system used for the fabrication of both QDs and PhC cavities. A detailed description of the fabrication steps leading to the realization of integrated QD-PhC cavity systems is provided, together with the experimental evidence of a weak coupling effect between the single-photon emitter and the PhC cavity

Light Nuclides Produced in the Proton-Induced Spallation of 238U at 1 GeV

The production of light and intermediate-mass nuclides formed in the reaction 1H+238U at 1 GeV was measured at the Fragment Separator (FRS) at GSI, Darmstadt. The experiment was performed in inverse kinematics, shooting a 1 A GeV 238U beam on a thin liquid-hydrogen target. 254 isotopes of all elements in the range from Z=7 to Z=37 were unambiguously identified, and the velocity distributions of the produced nuclides were determined with high precision. The results show that the nuclides are produced in a very asymmetric binary decay of heavy nuclei originating from the spallation of uranium. All the features of the produced nuclides merge with the characteristics of the fission products as their mass increases.Comment: 40 pages, 16 figures, 3 table

Molecular Determinants of S100B Oligomer Formation

Background: S100B is a dimeric protein that can form tetramers, hexamers and higher order oligomers. These forms have been suggested to play a role in RAGE activation. Methodology/Principal Findings: Oligomerization was found to require a low molecular weight trigger/cofactor and could not be detected for highly pure dimer, irrespective of handling. Imidazol was identified as a substance that can serve this role. Oligomerization is dependent on both the imidazol concentration and pH, with optima around 90 mM imidazol and pH 7, respectively. No oligomerization was observed above pH 8, thus the protonated form of imidazol is the active species in promoting assembly of dimers to higher species. However, disulfide bonds are not involved and the process is independent of redox potential. The process was also found to be independent of whether Ca 2+ is bound to the protein or not. Tetramers that are purified from dimers and imidazol by gel filtration are kinetically stable, but dissociate into dimers upon heating. Dimers do not revert to tetramer and higher oligomer unless imidazol is again added. Both tetramers and hexamers bind the target peptide from p53 with retained stoichiometry of one peptide per S100B monomer, and with high affinity (lgK = 7.360.2 and 7.260.2, respectively in 10 mM BisTris, 5 mM CaCl 2, pH 7.0), which is less than one order of magnitude reduced compared to dimer under the same buffer conditions. Conclusion/Significance: S100B oligomerization requires protonated imidazol as a trigger/cofactor. Oligomers ar