War came to the Iowa community

On April 6, 1917, the United States of America declared war. Throughout the country communities marshalled forces to meet the situation. Today the United States is engaged in another war, which is creating problems of social and economic war planning on dimensions greater than those of the war in 1917-18. As the defense effort expands each community will face a notable increase in organized group activities, in new integrating organizations, heightened enthusiasm expressed in rallies and campaigns, new regulations of private lives. Everyone today recognizes that war involves readjustments in our society. Economic and political adjustments are obviously serious. Equally drastic are the necessary modifications in family life, in churches, in recreation, in education, in the innumerable activities which in peacetime follow so normal a routine that we accept them as a matter of course. These problems are no less vital to the welfare of our people than the effects of war upon land values and prices of farm products. The preservation of a democratic way of life depends upon the actions and attitude of all members of the nation in their local communities. The successful adjustment of individuals to these changes, and the organization of our energies for effective prosecution of the war require an understanding of the problems which will be involved

Additive Manufacturing of High-Refractive-Index, Nanoarchitected Titanium Dioxide for 3D Dielectric Photonic Crystals

Additive manufacturing at small scales enables advances in micro- and nanoelectromechanical systems, micro-optics, and medical devices. Materials that lend themselves to AM at the nanoscale, especially for optical applications, are limited. State-of-the-art AM processes for high-refractive-index materials typically suffer from high porosity and poor repeatability and require complex experimental procedures. We developed an AM process to fabricate complex 3D architectures out of fully dense titanium dioxide (TiO₂) with a refractive index of 2.3 and nanosized critical dimensions. Transmission electron microscopy (TEM) analysis proves this material to be rutile phase of nanocrystalline TiO₂, with an average grain size of 110 nm and <1% porosity. Proof-of-concept woodpile architectures with 300–600 nm beam dimensions exhibit a full photonic band gap centered at 1.8–2.9 μm, as revealed by Fourier-transform infrared spectroscopy (FTIR) and supported by plane wave expansion simulations. The developed AM process enables advances in 3D MEMS, micro-optics, and prototyping of 3D dielectric PhCs

Additive manufacturing of titanium dioxide for dielectric photonic crystals

Fabrication of 3D dielectric photonic crystals in the visible and in the infrared range typically requires sub-micron structural features and high-refractive index materials. We developed a template-free additive manufacturing (AM) process based on direct laser writing (DLW) that can create complex 3D architectures out of titania (TiO_2) with ~100 nm resolution. In this process, we synthesize hybrid organic-inorganic materials that contain titanium clusters coordinated with acrylic ligands to prepare a photoresist that is amenable to two-photon lithography (TPL). We sculpt a pre-ceramic architecture using TPL and then pyrolyze in air at 900°C to remove the organic constituents to produce a replica of the original structure with ~70% reduced linear dimensions. Energy-Dispersive Spectroscopy (EDS) and Raman spectroscopy confirm the constituent solid to consist predominantly out of rutile titania. We demonstrate this process by fabricating titania woodpile structures with lateral dimensions of 70 × 70 μm and lateral periodicities between 1.0 and 1.3 μm. Fourier Transform Infrared (FTIR) spectroscopy reveals passive tuning of the reflectance peak between 1.7 and 2.3 μm, which agrees with Plane Wave Expansion simulations. This titania AM process offers a promising pathway to efficiently fabricate complex 3D nano-architectures out of a high-index material for 3D dielectric photonic crystals in the visible and the infrared

Olfactory cues are sufficient to elicit social approach behaviors but not social transmission of food preference in C57BL/6J mice

Mouse models for the study of autistic-like behaviors are increasingly needed to test hypotheses about the causes of autism, and to evaluate potential treatments. Both the automated 3-chambered social approach test and social transmission of food preference have been proposed as mouse behavioral assays with face validity to diagnostic symptoms of autism, including aberrant reciprocal social interactions and impaired communication. Both assays measure aspects of normal social behavior in the mouse. However, little is known regarding the salient cues present in each assay that elicit normal social approach and communication. To deconstruct the critical components, we focused on delivering discrete social and non-social olfactory and visual cues within the context of each assay. Results indicate that social olfactory cues were sufficient to elicit normal sociability in the 3-chambered social approach test On social transmission of food preference, isolated social olfactory cues were sufficient to induce social investigation, but not sufficient to induce food preference. These findings indicate that olfactory cues are important in mouse social interaction, but that additional sensory cues are necessary in certain situations. The present evidence that both the 3-chambered social approach assay and the social transmission of food preference assay require socially relevant cues to elicit normal behavior supports the use of these two assays to investigate autism-related behavioral phenotypes in mice

Metatranscriptomic Sequencing of a Cyanobacterial Soil-Surface Consortium with and without a Diverse Underlying Soil Microbiome.

Soil surface consortia are easily observed and sampled, allowing examination of their interactions with soil microbiomes. Here, we present metatranscriptomic sequences from Dark Green 1 (DG1), a cyanobacterium-based soil surface consortium, in the presence and absence of an underlying soil microbiome and/or urea

Monitoring External Training Loads and Neuromuscular Performance for Division I Basketball Players over the Preseason

Limited research has paralleled concomitant changes in external training load (eTL) and countermovement jump (CMJ) performance. Therefore, this investigation characterized eTL and CMJ performance changes across preseason training in Division 1 male collegiate basketball athletes, while examining the influence of position (Guard vs. Forward/Center) and scholarship status (Scholarship = S vs. Walk-on = WO). During 22 practices, eTL was monitored in 14 male athletes, with weekly CMJs performed to quantify neuromuscular performance (Jump Height [JH], Flight Time:Contraction Time [FT:CT], Reactive Strength Index Modified [RSIMod ]). PlayerLoad per minute was significantly higher during W1 and W2 (5.4 ± 1.3au and 5.3 ± 1.2au, respectively; p < 0.05) compared to subsequent weeks, but no additional differences in eTL parameters across time were observed. Scholarship athletes displayed greater PlayerLoad (S = 777.1 ± 35.6, WO = 530.1 ± 56.20; Inertial Movement Analysis (IMA) IMA_High (S = 70.9 ± 15.2, WO = 41.3 ± 15.2); IMA_Medium (S = 159.9 ± 30.7, WO = 92.7 ± 30.6); and IMA_Low (S = 700.6 ± 105.1, WO = 405 ± 105.0;) (p < 0.05), with no observed differences in eTL by position. Moderate decreases in FT:CT and RSIMod paralleled increased eTL. Significant increases in practice intensity (W1 and W2) did not impact CMJ performance, suggesting athletes could cope with the prescribed training loads. However, moderate perturbations in FT:CT and RSIMod paralleled the weeks with intensified training. Cumulatively, scholarship status appears to influence eTL while player position does not.The authors would like to thank Mr. Brady Brown and Mr. Keldon Peak for their assistance with this project. Additionally, the authors thank the Basketball Programs at the University of Oklahoma for their continued support of research directed at enhancing athlete performance, while also improving overall student-athlete welfare. Finally, the authors would also like to thank all of the student-athletes that graciously volunteered their time to enroll and participate in this study. The experiments comply with the current laws of the country in which they were performed. The authors have no conflict of interest to declare. Open Access fees paid for in whole or in part by the University of Oklahoma Libraries.Ye

Evaluation of pedometry as a patient-centered outcome in patients undergoing hematopoietic cell transplant (HCT): A comparison of pedometry and patient-reports of symptoms, health, and quality of life.

Aims We evaluated pedometry as a novel patient-centered outcome because it enables passive continuous assessment of activity and may provide information about the consequences of symptomatic toxicity complementary to self-report. Methods Adult patients undergoing hematopoietic cell transplant (HCT) wore pedometers and completed PRO assessments during transplant hospitalization (4 weeks) and 4 weeks post-discharge. Patient reports of symptomatic treatment toxicities (single items from PROCTCAE, http://healthcaredelivery.cancer.gov/pro-ctcae) and symptoms, physical health, mental health, and quality of life (PROMIS Global-10, http://nih.promis.org), assessed weekly with 7-day recall on Likert scales, were compared individually with pedometry data, summarized as average daily steps per week, using linear mixed models. Results Thirty-two patients [mean age 55 (SD = 14), 63 % male, 84 % white, 56 % autologous, 43 % allogeneic] completed a mean 4.6 (SD = 1.5, range 1–8) evaluable assessments. Regression model coefficients (β) indicated within-person decrements in average daily steps were associated with increases in pain (β = -852; 852 fewer steps per unit increase in pain score, p<0.001), fatigue (β = -886, p<0.001), vomiting (β = -518, p<0.01), shaking/chills (β = -587, p<0.01), diarrhea (β = -719, p<0.001), shortness of breath (β = -1018, p<0.05), reduction in carrying out social activities (β = 705, p<0.01) or physical activities (β = 618, p<0.01), and global physical health (β = 101, p<0.001), but not global mental health or quality of life. Conclusions In this small sample of HCT recipients, more severe symptoms, impaired physical health, and restrictions in the performance of usual daily activities were associated with statistically significant decrements in objectively measured daily steps. Pedometry may be a valuable outcome measure and validation anchor in clinical research

The Pan-STARRS Moving Object Processing System

We describe the Pan-STARRS Moving Object Processing System (MOPS), a modern software package that produces automatic asteroid discoveries and identifications from catalogs of transient detections from next-generation astronomical survey telescopes. MOPS achieves > 99.5% efficiency in producing orbits from a synthetic but realistic population of asteroids whose measurements were simulated for a Pan-STARRS4-class telescope. Additionally, using a non-physical grid population, we demonstrate that MOPS can detect populations of currently unknown objects such as interstellar asteroids. MOPS has been adapted successfully to the prototype Pan-STARRS1 telescope despite differences in expected false detection rates, fill-factor loss and relatively sparse observing cadence compared to a hypothetical Pan-STARRS4 telescope and survey. MOPS remains >99.5% efficient at detecting objects on a single night but drops to 80% efficiency at producing orbits for objects detected on multiple nights. This loss is primarily due to configurable MOPS processing limits that are not yet tuned for the Pan-STARRS1 mission. The core MOPS software package is the product of more than 15 person-years of software development and incorporates countless additional years of effort in third-party software to perform lower-level functions such as spatial searching or orbit determination. We describe the high-level design of MOPS and essential subcomponents, the suitability of MOPS for other survey programs, and suggest a road map for future MOPS development.Comment: 57 Pages, 26 Figures, 13 Table

Under-Oil Autonomously Regulated Oxygen Microenvironments: A Goldilocks Principle-Based Approach for Microscale Cell Culture

Oxygen levels in vivo are autonomously regulated by a supply–demand balance, which can be altered in disease states. However, the oxygen levels of in vitro cell culture systems, particularly microscale cell culture, are typically dominated by either supply or demand. Further, the oxygen microenvironment in these systems is rarely monitored or reported. Here, a method to establish and dynamically monitor autonomously regulated oxygen microenvironments (AROM) using an oil overlay in an open microscale cell culture system is presented. Using this method, the oxygen microenvironment is dynamically regulated via the supply–demand balance of the system. Numerical simulation and experimental validation of oxygen transport within multi-liquid-phase, microscale culture systems involving a variety of cell types, including mammalian, fungal, and bacterial cells are presented. Finally, AROM is applied to establish a coculture between cells with disparate oxygen demands—primary intestinal epithelial cells (oxygen consuming) and Bacteroides uniformis (an anaerobic species prevalent in the human gut)

What are shared and social values of ecosystems?

The theoretical framework outlined in this paper was developed initially through a series of expert workshops as part of the Valuing Nature Network — BRIDGE: From Values to Decisions project, funded by the UK Natural Environment Research Council (NERC). It was developed further through the follow-on phase of the UK National Ecosystem Assessment (Work Package 6: Shared, Plural and Cultural Values) funded by the UK Department of the Environment, Food and Rural Affairs (Defra), the Welsh Government, NERC, the Economic and Social Research Council (ESRC), and the Arts and Humanities Research Council (AHRC).Peer reviewedPublisher PD