Geometric properties of a prestressed segmented spherical shell

Design and construction of plastic model of prestressed segmented spherical shel

Calculation of The Band Gap Energy and Study of Cross Luminescence in Alkaline-Earth Dihalide Crystals

The band gap energy as well as the possibility of cross luminescence processes in alkaline-earth dihalide crystals have been calculated using the ab initio Perturbed-Ion (PI) model. The gap is calculated in several ways: as a difference between one-electron energy eigenvalues and as a difference between total energies of appropriate electronic states of the crystal, both at the HF level and with inclusion of Coulomb correlation effects. In order to study the possibility of ocurrence of cross luminescence in these materials, the energy difference between the valence band and the upmost core band for some representative crystals has been calculated. Both calculated band gap energies and cross luminescence predictions compare very well with the available experimental results.Comment: LaTeX file containing 8 pages plus 1 postscript figure. Final version accepted for publication in The Journal of the Physical Society of Japan. It contains a more complete list of references, as well as a more detailed comparison with previous theoretical investigations on the subjec

Quaternary Ammonium Silane-Functionalized, Methacrylate Resin Composition With Antimicrobial Activities and Self-Repair Potential

The design of antimicrobial polymers to address healthcare issues and minimize environmental problems is an important endeavor with both fundamental and practical implications. Quaternary ammonium silane-functionalized methacrylate (QAMS) represents an example of antimicrobial macromonomers synthesized by a sol–gel chemical route; these compounds possess flexible Si–O–Si bonds. In present work, a partially hydrolyzed QAMS co-polymerized with 2,2-[4(2-hydroxy 3-methacryloxypropoxy)-phenyl]propane is introduced. This methacrylate resin was shown to possess desirable mechanical properties with both a high degree of conversion and minimal polymerization shrinkage. The kill-on-contact microbiocidal activities of this resin were demonstrated using single-species biofilms of Streptococcus mutans (ATCC 36558), Actinomyces naeslundii (ATCC 12104) and Candida albicans (ATCC 90028). Improved mechanical properties after hydration provided the proof-of-concept that QAMS-incorporated resin exhibits self-repair potential via water-induced condensation of organic modified silicate (ormosil) phases within the polymerized resin matrix

In vitro analysis of the cytotoxicity and the antimicrobial effect of four endodontic sealers

<p>Abstract</p> <p>Introduction</p> <p>The aim of this study was to investigate <it>in vitro </it>the cytotoxicity and antibacterial properties of four different endodontic sealers using human periodontal ligament fibroblast cell proliferation and visual analysis of growth inhibition.</p> <p>Methods</p> <p>A silicone (GuttaFlow), silicate (EndoSequence BC), zinc oxide eugenol (Pulp Canal Sealer EWT) and epoxy resin (AH Plus Jet) based sealer were incubated with PDL fibroblasts (10⁴cells/ml, n = 6) up to 96 h. Cell proliferation (RFU) was determined by means of the Alamar Blue assay. Cell growth and morphology was visualized by means of fluorescent dyes. Possible antibacterial properties of the different sealers were visualized by means of SEM (<it>Enterococcus faecalis; Parvimonas micra</it>).</p> <p>Results</p> <p>Fibroblast proliferation depended on sealer and cultivation time. After 72 and 96 h GuttaFlow and EndoSequence BC showed relatively non-cytotoxic reactions, while Pulp Canal Sealer EWT and AH Plus Jet caused a significant decrease of cell proliferation (p < 0.001). Visualization of cell growth and morphology with various fluorescent dyes supplemented the results. No antibacterial effect of EndoSequence BC to <it>P. micra </it>was found, whereas GuttaFlow showed a weak, Pulp Canal Sealer EWT and AH Plus Jet extensive growth inhibition. Also, no antibacterial effect of GuttaFlow, EndoSequence BC or AH Plus Jet to <it>E. faecalis </it>could be detected.</p> <p>Conclusions</p> <p>These <it>in vitro </it>findings reveal that GuttaFlow and EndoSequence BC can be considered as biocompatible sealing materials. However, prior to their clinical employment, studies regarding their sealing properties also need to be considered.</p

LSST: from Science Drivers to Reference Design and Anticipated Data Products

(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system sited at Cerro Pach\'{o}n in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. The standard observing sequence will consist of pairs of 15-second exposures in a given field, with two such visits in each pointing in a given night. With these repeats, the LSST system is capable of imaging about 10,000 square degrees of sky in a single filter in three nights. The typical 5$\sigma$ point-source depth in a single visit in $r$ will be $\sim 24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $\delta<+34.5^\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\sim27.5$. The remaining 10\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.Comment: 57 pages, 32 color figures, version with high-resolution figures available from https://www.lsst.org/overvie

Spinal Cord Injury Causes Sustained Disruption of the Blood-Testis Barrier in the Rat

There is a high incidence of infertility in males following traumatic spinal cord injury (SCI). Quality of semen is frequently poor in these patients, but the pathophysiological mechanism(s) causing this are not known. Blood-testis barrier (BTB) integrity following SCI has not previously been examined. The objective of this study was to characterize the effects of spinal contusion injury on the BTB in the rat. 63 adult, male Sprague Dawley rats received SCI (n = 28), laminectomy only (n = 7) or served as uninjured, age-matched controls (n = 28). Using dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI), BTB permeability to the vascular contrast agent gadopentate dimeglumine (Gd) was assessed at either 72 hours-, or 10 months post-SCI. DCE-MRI data revealed that BTB permeability to Gd was greater than controls at both 72 h and 10 mo post-SCI. Histological evaluation of testis tissue showed increased BTB permeability to immunoglobulin G at both 72 hours- and 10 months post-SCI, compared to age-matched sham-operated and uninjured controls. Tight junctional integrity within the seminiferous epithelium was assessed; at 72 hours post-SCI, decreased expression of the tight junction protein occludin was observed. Presence of inflammation in the testes was also examined. High expression of the proinflammatory cytokine interleukin-1 beta was detected in testis tissue. CD68+ immune cell infiltrate and mast cells were also detected within the seminiferous epithelium of both acute and chronic SCI groups but not in controls. In addition, extensive germ cell apoptosis was observed at 72 h post-SCI. Based on these results, we conclude that SCI is followed by compromised BTB integrity by as early as 72 hours post-injury in rats and is accompanied by a substantial immune response within the testis. Furthermore, our results indicate that the BTB remains compromised and testis immune cell infiltration persists for months after the initial injury

Ozone, aerosol, potential vorticity, and trace gas trends observed at high‐latitudes over North America from February to May 2000

Ozone (O3) and aerosol scattering ratio profiles were obtained from airborne lidar measurements on thirty‐eight flights over seven deployments covering the latitudes of 40°–85°N between 4 February and 23 May 2000 as part of the Tropospheric Ozone Production about the Spring Equinox (TOPSE) field experiment. Each deployment started from Broomfield, Colorado, with bases in Churchill, Canada, and on most deployments, Thule Air Base, Greenland. Nadir and zenith lidar O3 measurements were combined with in situ O3 measurements to produce vertically continuous O3 profiles from near the surface to above the tropopause. Potential vorticity (PV) distributions along the flight track were obtained from several different meteorological analyses. Ozone, aerosol, and PV distributions were used together to identify the presence of pollution plumes and stratospheric intrusions. Ozone was found to increase in the middle free troposphere (4–6 km) at high latitudes (60°–85°N) by an average of 4.6 ppbv/mo (parts per billion by volume per month) from about 54 ppbv in early February to over 72 ppbv in mid‐May. The average aerosol scattering ratios at 1064 nm in the same region increased rapidly at an average rate of 0.36/mo from about 0.38 to over 1.7. Ozone and aerosol scattering were highly correlated over the entire field experiment, and PV and beryllium (7Be) showed no significant positive trend over the same period. The primary cause of the observed O3 increase in the mid troposphere at high latitudes was determined to be the photochemical production of O3 in pollution plumes with less than 20% of the increase from stratospherically‐derived O3

Large-scale ozone and aerosol distributions, air mass characteristics, and ozone fluxes over the western Pacific Ocean in late winter/early spring

Large‐scale measurements of ozone (O3) and aerosol distributions were made from the NASA DC‐8 aircraft during the Transport and Chemical Evolution over the Pacific (TRACE‐P) field experiment conducted in February–April 2001. Remote measurements were made with an airborne lidar to provide O3 and multiple‐wavelength aerosol backscatter profiles from near the surface to above the tropopause along the flight track. In situ measurements of O3, aerosols, and a wide range of trace gases were made onboard the DC‐8. Five‐day backward trajectories were used in conjunction with the O3 and aerosol distributions on each flight to indicate the possible origin of observed air masses, such as from biomass burning regions, continental pollution, desert regions, and oceanic regions. Average latitudinal O3 and aerosol scattering ratio distributions were derived from all flights west of 150°E, and these distributions showed the average latitude and altitude dependence of different dynamical and chemical processes in determining the atmospheric composition over the western Pacific. TRACE‐P (TP) showed an increase in the average latitudinal distributions of both O3 and aerosols compared to PEM‐West B (PWB), which was conducted in February–March 1994. O3, aerosol, and potential vorticity levels were used to identify nine air mass types and quantify their frequency of occurrence as a function of altitude. This paper discusses the characteristics of the different air mass types encountered during TP and compares them to PWB. These results confirmed that most of the O3 increase in TP was due to photochemistry. The average latitudinal eastward O3 flux in the western Pacific during TP was found to peak near 32°N with a total average O3 flux between 14 and 46°N of 5.2 Tg/day. The eastward total CO flux was calculated to be 2.2 Tg‐C/day with ∼6% estimated from Asia. The Asian flux of CO2 and CH4 was estimated at 4.9 and 0.06 Tg‐C/day