1,181 research outputs found
Рекомендации по ограничению динамических перенапряжений в обмотке ротора асинхронизированного турбогенератора
In this paper, a Volume-of-Fluid (VOF)-based approach for the Direct Numerical Simulation (DNS) of reactive mass transfer in gas–liquid flows is described. At the interface, local thermodynamic equilibrium is assumed and modelled by Henry's law. First numerical simulation results are presented for non-reactive and reactive mass transfer from rising gas bubbles to a surrounding liquid. For the evaluation of reactive mass transfer simulations with a consecutive, competitive reaction system in the liquid, a local selectivity is employed
Impact of 3-Cyanopropionic Acid Methyl Ester on the Electrochemical Performance of ZnMn₂O₄ as Negative Electrode for Li-Ion Batteries
Due to their high theoretical capacity, transition metal oxide compounds are promising electrode materials for lithium-ion batteries. However, one drawback is associated with relevant capacity fluctuations during cycling, widely observed in the literature. Such strong capacity variation can result in practical problems when positive and negative electrode materials have to be matched in a full cell. Herein, the study of ZnMn2O4 (ZMO) in a nonconventional electrolyte based on 3-cyanopropionic acid methyl ester (CPAME) solvent and LiPF6 salt is reported for the first time. Although ZMO in LiPF6/CPAME electrolyte displays a dramatic capacity decay during the first cycles, it shows promising cycling ability and a suppressed capacity fluctuation when vinylene carbonate (VC) is used as an additive to the CPAME-based electrolyte. To understand the nature of the solid electrolyte interphase (SEI), the electrochemical study is correlated to ex situ X-ray photoelectron spectroscopy (XPS)
The unrestricted Skyrme-tensor time-dependent Hartree-Fock and its application to the nuclear response from spherical to triaxial nuclei
The nuclear time-dependent Hartree-Fock model formulated in the
three-dimensional space,based on the full Skyrme energy density functional and
complemented with the tensor force,is presented for the first time. Full
self-consistency is achieved by the model. The application to the isovector
giant dipole resonance is discussed in the linear limit, ranging from spherical
nuclei (16O, 120Sn) to systems displaying axial or triaxial deformation (24Mg,
28Si, 178Os, 190W, 238U).
Particular attention is paid to the spin-dependent terms from the central
sector of the functional, recently included together with the tensor. They turn
out to be capable of producing a qualitative change on the strength
distribution in this channel. The effect on the deformation properties is also
discussed. The quantitative effects on the linear response are small and,
overall, the giant dipole energy remains unaffected.
Calculations are compared to predictions from the (quasi)-particle random
phase approximation and experimental data where available, finding good
agreement
Inhibitory effect of ionizing radiation on cellular adhesion of lymphocytes to endothelial cells under dynamic conditions
Evidence for a Kernel of Truth in Children’s Facial Impressions of Children’s Niceness, but not Shyness
Acknowledgements: We are grateful to the parents and children who helped make this research possible. We would like to thank Romina Palermo for providing us the opportunity to contact her sample of participants and to use some existing data. We also thank Lou Ewing for sharing the Zeb the Alien Scientist testing materials, and Saba Siddique for comments regarding a manuscript draft. Finally, we would like to thank Kaitlyn Turbett, Dielle Horne, Saba Siddique, Chloe Giffard, and Maira Vicente Braga, for help testing participants. JC, LJ, GR, and CS conceived the study and helped to draft and edit the manuscript. JC programmed the experiment, collected most participant data, performed the statistical analyses and drafted the first manuscript draft. EB coordinated image collection and testing schedules. All authors participated in the study design, and read, provided critical revisions and approved the final manuscript. The study methods, hypotheses and analyses were pre-registered(https://osf.io/kjtva/registrations). Funding: This research was supported by an APR Internship Academic Mentor Grant to CS, an Australian Research Council (ARC) Centre of Excellence Grant award to GR [CE110001021], ARC Discovery Early Career Research Award to CS [DE190101043], ARC Discovery Grant to GR and CS [DP170104602], ARC Discovery Grant to LJ [140101743], and a Research Training Program stipend to JC.Peer reviewedPostprin
4D Printing of Shape Memory Polymers: From Macro to Micro
A novel and versatile shape memory ink system allowing 4D printing with light at the macroscale as well as the microscale is presented. Digital light processing (DLP) and direct laser writing (DLW) are selected as suitable 3D printing technologies to cover both regimes. First, a system based on monofunctional isobornyl acrylate and two crosslinkers consisting of a soft and a hard diacrylate is identified and proven to be compatible with both printing techniques. Employing DLP, a large variety of structures exhibiting distinct complexity is printed. These structures range from simple frames to more demanding 3D geometries such as double platform structures, infinity rings, or cubic grids. The shape memory effect is demonstrated for all the 3D geometries. Excellent shape fixity as well as recovery and repeatability is shown. Furthermore, the formulation is adapted for fast 4D printing at the microscale using DLW. Importantly, the 4D printed microstructures display remarkable shape memory properties. The possibility of trapping and releasing microobjects, such as microspheres, is ultimately demonstrated by designing, smart box-like 4D microstructures that can be thermally actuated—evidencing the versatility and potential of the reported system
The use of reinforcement learning algorithms to meet the challenges of an artificial pancreas
Blood glucose control, for example, in diabetes mellitus or severe illness, requires strict adherence to a protocol of food, insulin administration and exercise personalized to each patient. An artificial pancreas for automated treatment could boost quality of glucose control and patients' independence. The components required for an artificial pancreas are: i) continuous glucose monitoring (CGM), ii) smart controllers and iii) insulin pumps delivering the optimal amount of insulin. In recent years, medical devices for CGM and insulin administration have undergone rapid progression and are now commercially available. Yet, clinically available devices still require regular patients' or caregivers' attention as they operate in open-loop control with frequent user intervention. Dosage-calculating algorithms are currently being studied in intensive care patients [1] , for short overnight control to supplement conventional insulin delivery [2] , and for short periods where patients rest and follow a prescribed food regime [3] . Fully automated algorithms that can respond to the varying activity levels seen in outpatients, with unpredictable and unreported food intake, and which provide the necessary personalized control for individuals is currently beyond the state-of-the-art. Here, we review and discuss reinforcement learning algorithms, controlling insulin in a closed-loop to provide individual insulin dosing regimens that are reactive to the immediate needs of the patient
Diverse syntrophic partnerships from deep-sea methane vents revealed by direct cell capture and metagenomics
Microorganisms play a fundamental role in the cycling of nutrients and energy on our planet. A common strategy for many microorganisms mediating biogeochemical cycles in anoxic environments is syntrophy, frequently necessitating close spatial proximity between microbial partners. We are only now beginning to fully appreciate the diversity and pervasiveness of microbial partnerships in nature, the majority of which cannot be replicated in the laboratory. One notable example of such cooperation is the interspecies association between anaerobic methane oxidizing archaea (ANME) and sulfate-reducing bacteria. These consortia are globally distributed in the environment and provide a significant sink for methane by substantially reducing the export of this potent greenhouse gas into the atmosphere. The interdependence of these currently uncultured microbes renders them difficult to study, and our knowledge of their physiological capabilities in nature is limited. Here, we have developed a method to capture select microorganisms directly from the environment, using combined fluorescence in situ hybridization and immunomagnetic cell capture. We used this method to purify syntrophic anaerobic methane oxidizing ANME-2c archaea and physically associated microorganisms directly from deep-sea marine sediment. Metagenomics, PCR, and microscopy of these purified consortia revealed unexpected diversity of associated bacteria, including Betaproteobacteria and a second sulfate-reducing Deltaproteobacterial partner. The detection of nitrogenase genes within the metagenome and subsequent demonstration of 15N2 incorporation in the biomass of these methane-oxidizing consortia suggest a possible role in new nitrogen inputs by these syntrophic assemblages
Photon data shed new light upon the GDR spreading width in heavy nuclei
A global study of the electric dipole strength in and below the isovector
giant dipole resonance (GDR) is presented for mass numbers A>80. It relies on
the recently established remarkably good match between data for the nuclear
photo effect to novel photon scattering data covering the region below the
neutron emission threshold as well as by average resonance neutron capture
(ARC). From the wide energy coverage of these data the correlation of the GDR
spreading width with energy can be studied with remarkable accuracy. A clear
sensitivity to details of the nuclear shape, i.e. the beta- and
gamma-deformations, is demonstrated. Based hereon a new parameterization of the
energy dependence of the nuclear electric-dipole strength is proposed which -
with only two new parameters - allows to describe the dipole strength in all
heavy nuclei with A>80. Although it differs significantly from previous
parameterizations it holds for spherical, transitional, triaxial and well
deformed nuclei. The GDR spreading width depends in a regular way on the
respective resonance energy, but it is independent of the photon energy.Comment: accepted by Phys. Lett. B after minor modification
Coupled bulk-surface free boundary problems arising from a mathematical model of receptor-ligand dynamics
We consider a coupled bulk-surface system of partial differential equations with nonlinear coupling modelling receptor-ligand dynamics. The model arises as a simplification of a mathematical model for the reaction between cell surface resident receptors and ligands present in the extra-cellular medium. We prove the existence and uniqueness of solutions. We also consider a number of biologically relevant asymptotic limits of the model. We prove convergence to limiting problems which take the form of free boundary problems posed on the cell surface. We also report on numerical simulations illustrating convergence to one of the limiting problems as well as the spatio-temporal distributions of the receptors and ligands in a realistic geometry
- …