9 research outputs found
Performance study of the Galway Bay wave energy test site floating power system
The Galway Bay wave energy test site promises to be a vital resource for wave energy researchers and developers. As part of the development of this site, a floating power system is being developed to provide power and data acquisition capabilities, including its function as a local grid connection, allowing for the connection of up to three wave energy converter devices. This work shows results from scaled physical model testing and numerical modelling of the floating power system and an oscillating water column connected with an umbilical. Results from this study will be used to influence further scaled testing as well as the full scale design and build of the floating power system in Galway Bay
Recommended from our members
Wave Energy Converter Modeling in the Time Domain: A Design Guide
As the ocean wave energy field continues to mature,
developers need a generic modeling methodology to test their
designs before building prototypes. A design methodology for a
first-pass time-domain simulation is a goal of this work. Built on
results from the frequency domain analysis, the general
procedure for obtaining time domain results is presented. Wave
energy researchers and developers can use this design guide as a
step in the process of obtaining a cost of energy estimate for their
device. Promoting the development of wave energy converters by
providing a sound modeling methodology is an aim of this
research.
Index Terms—Ocean Wave Energy Conversion, Time Domain
Modelin
Array Modeling and Testing of Fixed OWC Type Wave Energy Converters
If wave energy technology is to mature to commercial success, array optimization could play a key role in that process. This paper outlines physical and numerical modeling of an array of five oscillating water column wave energy converters. Numerical model simulations are compared with experimental tank test data for a non-optimal and optimal array layout. Results show a max increase of 12% in average power for regular waves, and 7% for irregular waves between the non-optimized and optimized layouts. The numerical model matches well under many conditions; however, improvement is needed to adjust for phase errors. This paper outlines the process of numerical and physical array testing, providing methodology and results helpful for researchers and developers working with wave energy converter arrays
Recommended from our members
Wave Energy Converter Modeling in the Frequency Domain : A Design Guide
Wave energy converter research continues to advance and new developers are continuing to emerge, leading to the need for a general modeling methodology. This work attempts to outline the design methodology necessary to perform frequency domain analysis on a generic wave energy converter. A two-body point absorber representing a generic popular design was chosen and a general procedure is presented showing the process to obtain first pass preliminary performance results. The result is a design guide that new developers can adapt to their particular design and wave conditions, which will provide the first steps toward a cost of energy estimate. This will serve the industry by providing a sound methodology to accelerate the new development of wave energy converters
Recommended from our members
On the design, modeling, and testing of ocean wave energy converters
Ocean wave energy converter technology continues to advance and new developers continue to emerge, leading to the need for a general design, modeling, and testing methodology. This work presents a development of the process of taking a wave energy converter from a concept to the prototype stage. A two body heaving point absorber representing a generic popular design was chosen and a general procedure is presented showing the process to model a wave energy converter in the frequency and time domains. A scaled prototype of an autonomous small scale wave energy converter was designed, built, and tested and provided data for model validation. The result is a guide that new developers can adapt to their particular design and wave conditions, which will provide a path toward a cost of energy estimate. This will serve the industry by providing sound methodology to accelerate the continued development of wave energy converters
Performance improvements of mooring systems for wave energy converters
In the development of wave energy converters, the mooring system is a key component for a safe station-keeping and an important factor in the cost of the wave energy production. Generally, when designing a mooring system for a wave energy converter, two important conditions must be considered: (i) that the mooring system must be strong enough to limit the drifting motions, even in extreme waves, tidal and wind conditions and (ii) it must be compliant enough so that the impact on wave energy production can be minimised. It is frequently found that these two conditions are contradictory. The existing solutions mainly include the use of heavy chains, which create a catenary shaped mooring configuration, allowing limited flexibility within the mooring system, and hence very large forces may still be present on mooring lines and thus on anchors. This solution is normally quite expensive if the costs of the materials and installation are included. This paper presents a new solution to the mooring system for wave energy converters within the FP7 project, ‘GeoWAVE’, which is a project aiming to develop a new generation of the moorings system for minimising the loads on mooring lines and anchors, the impact on the device motions for power conversion, and the footprint if it is applicable, and meanwhile the new types of anchors are also addressed within the project. However this paper will focus on the new mooring system by presenting the wave tank test results of the Pelamis wave energy converter model and the new developed mooring system. It can be seen that the new generation of mooring system can significantly reduce the loads on mooring lines and anchors, and reduce the device excursions as a result of the new mooring system when compare to the conventional catenary mooring
Wave Tank Testing and Model Validation of an Autonomous Wave Energy Converter
A key component in bringing ocean wave energy converters from concept to commercialization is the building and testing of scaled prototypes to provide model validation. A one quarter scale prototype of an autonomous two body heaving point absorber was modeled, built, and tested for this work. Wave tank testing results are compared with two hydrodynamic and system models—implemented in both ANSYS AQWA and MATLAB/Simulink—and show model validation over certain regions of operation. This work will serve as a guide for future developers of wave energy converter devices, providing insight in taking their design from concept to prototype stage