A Universal Synthesis Strategy for Tunable Metal‐Organic Framework Nanohybrids

Metal-organic frameworks (MOFs) with encapsulated nanoparticles (NPs) enjoy a vastly expanded application potential in catalysis, filtration, and sensing. The selection of particular modified core-NPs has yielded partial successes in overcoming lattice mismatch. However, restrictions on the choice of NPs not only limit the diversity, but also affect the properties of the hybrid materials. Here, we show a versatile synthesis strategy using a representative set of seven MOF-shells and six NP-cores that are fine-tuned to incorporate from single to hundreds of cores in mono-, bi-, tri- and quaternary composites. This method does not require the presence of any specific surface structures or functionalities on the pre-formed cores. Our key point is to regulate the diffusion rate of alkaline vapors that deprotonate organic linkers and trigger the controlled MOF-growth and encapsulation of NPs. This strategy is expected to pave the way for the exploration of more sophisticated MOF-nanohybrids.Alexander von Humboldt-Stiftung http://dx.doi.org/10.13039/100005156Peer Reviewe

Geomimetics for green polymer synthesis: highly ordered polyimides via hydrothermal techniques

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Inspired by geological ore formation processes, we apply one-step hydrothermal (HT) polymerization to the toughest existing high-performance polymer, poly(p-phenyl pyromellitimide) (PPPI). We obtain highly-ordered and fully imidized PPPI as crystalline flakes and flowers on the micrometer scale. In contrast to classical 2-step procedures that require long reaction times and toxic solvents and catalysts, HT polymerization allows for full conversion in only 1 h at 200 °C, in nothing but hot water. Investigation of the crystal growth mechanismviascanning electron microscopy (SEM) suggests that PPPI aggregates formviaa dissolution–polymerization–crystallization process, which is uniquely facilitated by the reaction conditions in the HT regime. A conventionally prefabricated polyimide did not recrystallize hydrothermally, indicating that the HT polymerization and crystallization occur simultaneously. The obtained material shows excellent crystallinity and remarkable thermal stability (600 °C under N2) that stem from a combination of a strong, covalent polymer backbone and interchain hydrogen bonding

Molecular Mobility and Gas Transport Properties of Mixed Matrix Membranes Based on PIM‑1 and a Phosphinine Containing Covalent Organic Framework

Polymers with intrinsic microporosity (PIMs) are gaining attention as gas separation membranes. Nevertheless, they face limitations due to their pronounced physical aging. In this study, a covalent organic framework containing λ5-phosphinine moieties, CPSF-EtO, was incorporated as a nanofiller (concentration range 0–10 wt %) into a PIM-1 matrix forming dense films with a thickness of ca. 100 μm. The aim of the investigation was to investigate possible enhancements of gas transport properties and mitigating effects on physical aging. The incorporation of the nanofiller occurred on an nanoaggregate level with domains up to 100 nm, as observed by T-SEM and confirmed by X-ray scattering. Moreover, the X-ray data show that the structure of the microporous network of the PIM-1 matrix is changed by the nanofiller. As molecular mobility is fundamental for gas transport as well as for physical aging, the study includes dielectric investigations of pure PIM-1 and PIM-1/CPSF-EtO mixed matrix membranes to establish a correlation between the molecular mobility and the gas transport properties. Using the time-lag method, the gas permeability and the permselectivity were determined for N2, O2, CH4, and CO2 for samples with variation in filler content. A significant increase in the permeability of CH4 and CO2 (50% increase compared to pure PIM-1) was observed for a concentration of 5 wt % of the nanofiller. Furthermore, the most pronounced change in the permselectivity was found for the gas pair CO2/N2 at a filler concentration of 7 wt %.Bundesanstalt f?r Materialforschung und -Pr?fung 10.13039/100009553Engineering and Physical Sciences Research Council 10.13039/501100000266Peer Reviewe

Tuning of gallery heights in a crystalline 2D carbon nitride network

Poly(triazine imide) - a 2D layered network - can be obtained as an intercalation compound with halides from the ionothermal condensation of dicyandiamide in a eutectic salt melt. The gallery height of the intercalated material can be tuned via the composition of the eutectic melt and by post-synthetic modification. Here, we report the synthesis of poly(triazine imide) with intercalated bromide ions (PTI/Br) from a lithium bromide and potassium bromide salt melt. PTI/Br has a hexagonal unit-cell (P63cm (no. 185); a = 8.500390(68) Å, c = 7.04483(17) Å) that contains two layers of imide-bridged triazine (C3N3) units stacked in an AB-fashion as corroborated by solid-state NMR, FTIR spectroscopy and high-resolution TEM. By comparison with a recently reported material PTI/Li +Cl-, prepared from a LiCl/KCl eutectic, the layer-stacking distance in the analogous bromide material was expanded from 3.38 Å to 3.52 Å-an exceptionally large spacing for an aromatic, discotic system (cf. graphite 3.35 Å). Subsequent treatment of PTI/Br with concentrated ammonium fluoride yields poly(triazine imide) with intercalated fluoride ions (PTI/F) (P63/m (no. 176); a = 8.4212(4) Å, c = 6.6381(5) Å) as a statistical phase mix with PTI/Br. Fluoride intercalation leads to a contraction of the gallery height to 3.32 Å, demonstrating that the gallery height is synthetically tuneable in these materials. © The Royal Society of Chemistry 2013

Molecular Mobility and Gas Transport Properties of Mixed Matrix Membranes Based on PIM-1 and a Phosphinine Containing Covalent Organic Framework

Polymers with intrinsic microporosity (PIMs) are gaining attention as gas separation membranes. Nevertheless, they face limitations due to their pronounced physical aging. In this study, a covalent organic framework containing λ5-phosphinine moieties, CPSF-EtO, was incorporated as a nanofiller (concentration range 0–10 wt %) into a PIM-1 matrix forming dense films with a thickness of ca. 100 μm. The aim of the investigation was to investigate possible enhancements of gas transport properties and mitigating effects on physical aging. The incorporation of the nanofiller occurred on an nanoaggregate level with domains up to 100 nm, as observed by T-SEM and confirmed by X-ray scattering. Moreover, the X-ray data show that the structure of the microporous network of the PIM-1 matrix is changed by the nanofiller. As molecular mobility is fundamental for gas transport as well as for physical aging, the study includes dielectric investigations of pure PIM-1 and PIM-1/CPSF-EtO mixed matrix membranes to establish a correlation between the molecular mobility and the gas transport properties. Using the time-lag method, the gas permeability and the permselectivity were determined for N2, O2, CH4, and CO2 for samples with variation in filler content. A significant increase in the permeability of CH4 and CO2 (50% increase compared to pure PIM-1) was observed for a concentration of 5 wt % of the nanofiller. Furthermore, the most pronounced change in the permselectivity was found for the gas pair CO2/N2 at a filler concentration of 7 wt %

A functional triazine framework based on N-heterocyclic building blocks

Covalent organic frameworks constitute a subclass of polymeric materials offering enhanced porosity, functionality and stability. In this work a covalent triazine framework based on bipyridine building blocks is presented, along with a comprehensive elucidation of its local structure, porosity, and capacity for metal uptake. A typical synthesis was carried out under ionothermal conditions at 400-700 degrees C using ZnCl2 as a Lewis acidic trimerization catalyst. A high degree of local order and the presence of triazine and bipyridine moieties are ascertained at a synthesis temperature of 400 degrees C, along with micropores and specific surface areas of up to 1100 m(2) g(-1). Mesopores are increasingly formed at synthesis temperatures above 450 degrees C, yielding highly porous frameworks with hierarchical porosity and exceptionally large surface areas in excess of 3200 m(2) g(-1) at 700 degrees C. We demonstrate the capability of the bipyridine unit to provide specific and strong binding sites for a large variety of transition metal ions, including Co, Ni, Pt and Pd. The degree of metal loading (up to 38 wt%) can be tuned by the metal concentration in solution and is dependent on both the type of metal as well as the temperature at which the CTF was synthesized. Evidence for site-specific metal coordination bodes well for the use of metal-loaded CTFs as heterogeneous catalysts carrying homogeneous-type active sites

Trapping virtual pores by crystal retro-engineering

Stable guest-free porous molecular crystals are uncommon. By contrast, organic molecular crystals with guest-occupied cavities are frequently observed, but these cavities tend to be unstable and collapse on removal of the guests—this feature has been referred to as ‘virtual porosity’. Here, we show how we have trapped the virtual porosity in an unstable low-density organic molecular crystal by introducing a second molecule that matches the size and shape of the unstable voids. We call this strategy ‘retro-engineering’ because it parallels organic retrosynthetic analysis, and it allows the metastable two-dimensional hexagonal pore structure in an organic solvate to be trapped in a binary cocrystal. Unlike the crystal with virtual porosity, the cocrystal material remains single crystalline and porous after removal of guests by heating

A diverse view of science to catalyse change

Valuing diversity leads to scientific excellence, the progress of science and, most importantly, it is simply the right thing to do. We must value diversity not only in words, but also in actions