In vivo assessment of the mechanical properties of the child cortical bone using quantitative computed tomography

The mechanical properties of the rib cortical bone are extremely rare on children due to difficulties to obtain specimens to perform conventional tests. Some recent studies used cadaveric bones or bone tissues collected during surgery but are limited by the number of samples that could be collected. A non-invasive technique could be extremely valuable to overcome this limitation. It has been shown that a relationship exists between the mechanical properties (apparent Young’s modulus and ultimate strength) and the bone mineral density (assessed using Quantitative Computed Tomography, QCT), for the femur and recently by our group for the adult ribs ex vivo. Thus the aim of this study was to assess the mechanical properties of the child rib cortical bone using both QCT images in vivo and the previous relationship between bone mineral density and mechanical properties of the rib cortical bone. Twenty-eight children were included in this study. Seven age-groups have been considered (1, 1.5, 3, 6, 10, 15, 18 years old). The QCT images were prescribed for various thoracic pathologies at the pediatric hospital in Lyon. A calibration phantom was added to the clinical protocol without any modifications for the patient. The protocol was approved by the ethical committee. A 3D reconstruction of each thorax was performed using the QCT images. A custom software was then used to obtain cross-sections to the rib midline. The mean bone mineral density was then computed by averaging the Hounsfield Units in a specific cross-section and by converting the mean value (Hounsfield Units) in bone mineral density using the calibration phantom. This bone mineral density was assessed for the 6th rib of each subject. Our relationship between the bone mineral density and the mechanical properties of the rib cortical bone was used to derive the mechanical properties of the child ribs in vivo. The results give values for the apparent Young’s modulus and the ultimate strength. The mechanical properties increase along growth. As an example the apparent Young’s modulus in the lateral region ranges from 7 GPa +/-3 at 1 year old up to 13 GPa +/- 2 at 18 years old. These data are in agreement with the few previous values obtained from child tissues. This methodology opens the way to in vivo measurement of the mechanical properties of the child cortical bone based on calibrated QCT images

Minimal chordal sense of direction and circulant graphs

A sense of direction is an edge labeling on graphs that follows a globally consistent scheme and is known to considerably reduce the complexity of several distributed problems. In this paper, we study a particular instance of sense of direction, called a chordal sense of direction (CSD). In special, we identify the class of k-regular graphs that admit a CSD with exactly k labels (a minimal CSD). We prove that connected graphs in this class are Hamiltonian and that the class is equivalent to that of circulant graphs, presenting an efficient (polynomial-time) way of recognizing it when the graphs' degree k is fixed

Psychosocial stress impairs working memory at high loads: an association with cortisol levels and memory retrieval.

De samenhang tussen somatische en psychische (dys)functie

Intercomparison of Permittivity Measurement Techniques for Ferroelectric Thin Layers

International audienceThe dielectric properties of a KTa0.65Nb0.35O3 (KTN) ferroelectric composition for a submicronic thin layer were measured in the microwave domain using different electromagnetic characterization methods. Complementary experimental techniques (broadband methods versus resonant techniques, waveguide versus transmission line) and complementary data processing procedures (quasi-static theoretical approaches versus full-wave analysis) were selected to investigate the best way to characterize ferroelectric thin films. The measured data obtained from the cylindrical resonant cavity method, the experimental method that showed the least sources of uncertainty, were taken as reference values for comparisons with results obtained using broadband techniques. The error analysis on the methods used is discussed with regard to the respective domains of validity for each method; this enabled us to identify the best experimental approach for obtaining an accurate determination of the microwave dielectric properties of ferroelectric thin layers

Secondary contact and admixture between independently invading populations of the Western corn rootworm, diabrotica virgifera virgifera in Europe

The western corn rootworm, Diabrotica virgifera virgifera (Coleoptera: Chrysomelidae), is one of the most destructive pests of corn in North America and is currently invading Europe. The two major invasive outbreaks of rootworm in Europe have occurred, in North-West Italy and in Central and South-Eastern Europe. These two outbreaks originated from independent introductions from North America. Secondary contact probably occurred in North Italy between these two outbreaks, in 2008. We used 13 microsatellite markers to conduct a population genetics study, to demonstrate that this geographic contact resulted in a zone of admixture in the Italian region of Veneto. We show that i) genetic variation is greater in the contact zone than in the parental outbreaks; ii) several signs of admixture were detected in some Venetian samples, in a Bayesian analysis of the population structure and in an approximate Bayesian computation analysis of historical scenarios and, finally, iii) allelic frequency clines were observed at microsatellite loci. The contact between the invasive outbreaks in North-West Italy and Central and South-Eastern Europe resulted in a zone of admixture, with particular characteristics. The evolutionary implications of the existence of a zone of admixture in Northern Italy and their possible impact on the invasion success of the western corn rootworm are discussed

Idealness of k-wise intersecting families

A clutter is k-wise intersecting if every k members have a common element, yet no element belongs to all members. We conjecture that, for some integer k ≥ 4, every k-wise intersecting clutter is non-ideal. As evidence for our conjecture, we prove it for k = 4 for the class of binary clutters. Two key ingredients for our proof are Jaeger’s 8-flow theorem for graphs, and Seymour’s characterization of the binary matroids with the sums of circuits property. As further evidence for our conjecture, we also note that it follows from an unpublished conjecture of Seymour from 1975. We also discuss connections to the chromatic number of a clutter, projective geometries over the two-element field, uniform cycle covers in graphs, and quarter-integral packings of value two in ideal clutters

Using the Wigner-Ibach Surmise to Analyze Terrace-Width Distributions: History, User's Guide, and Advances

A history is given of the applications of the simple expression generalized from the surmise by Wigner and also by Ibach to extract the strength of the interaction between steps on a vicinal surface, via the terrace width distribution (TWD). A concise guide for use with experiments and a summary of some recent extensions are provided.Comment: 11 pages, 4 figures, reformatted (with revtex) version of refereed paper for special issue of Applied Physics A entitled "From Surface Science to Device Physics", in honor of the retirements of Prof. H. Ibach and Prof. H. L\"ut

Giant quantum oscillations in thermal transport in low-density metals via electron absorption of phonons

Oscillations of conductance observed in strong magnetic fields are a striking manifestation of the quantum dynamics of charge carriers in solids. The large charge carrier density in typical metals sets the scale of oscillations in both electrical and thermal conductivity, which characterize the Fermi surface. In semimetals, thermal transport at low-charge carrier density is expected to be phonon dominated, yet several experiments observe giant quantum oscillations in thermal transport. This raises the question of whether there is an overarching mechanism leading to sizable oscillations that survives in phonon-dominated semimetals. In this work, we show that such a mechanism exists. It relies on the peculiar phase-space allowed for phonon scattering by electrons when only a few Landau levels are filled. Our measurements on the Dirac semimetal ZrTe5 support this counter-intuitive mechanism through observation of pronounced thermal quantum oscillations, since they occur in similar magnitude and phase in directions parallel and transverse to the magnetic field. Our phase-space argument applies to all low-density semimetals, topological or not, including graphene and bismuth. Our work illustrates that phonon absorption can be leveraged to reveal degrees of freedom through their imprint on longitudinal thermal transport

Vicinal silicon surfaces: from step density wave to faceting

This paper investigates faceting mechanisms induced by electromigration in the regime where atomic steps are transparent. For this purpose we study several vicinal orientations by means of in-situ (optical diffraction, electronic microscopy) as well as ex-situ (AFM, microprofilometry) visualization techniques. The data show that faceting proceeds in two stages. The first stage is short and leads to the appearance of a step density wave, with a wavelength roughly independent of the surface orientation. The second stage is much slower, and leads to the formation of a hill-and-valley structure, the period of which depends on the initial surface orientation. A simple continuum model enables us to point out why the wavelength of the step density wave does not depend on the microscale details of the surface. The final wavelength is controlled by the competition between elastic step-step interaction and facet edge energy cost. Finally, the surface stress angular dependence is shown to emerge as a coarsed-grained picture from the step model.Comment: 26 pages, 9 figure