1,946 research outputs found
A Potential Alternative Orodispersible Formulation to Prednisolone Sodium Phosphate Orally Disintegrating Tablets
The orally disintegrating tablet (ODT) has shown vast potential as an alternative oral dosage form to conventional tablets wherein they can disintegrate rapidly (≤30 s) upon contact with saliva fluid and should have an acceptable mouthfeel as long as their weight doesn’t exceed 500 mg. However, owing to the bitterness of several active ingredients, there is a need to find a suitable alternative to ODTs that maintains their features and can be taste-masked more simply and inexpensively. Therefore, electrospun nanofibers and solvent-cast oral dispersible films (ODFs) are used in this study as potential OD formulations for prednisolone sodium phosphate (PSP) that is commercially available as ODTs. The encapsulation efficiency (EE%) of the ODFs was higher (≈100%) compared to the nanofibers (≈87%), while the disintegration time was considerably faster for the electrospun nanofibers (≈30 s) than the solvent-cast ODFs (≈700 s). Hence, accelerated release rate of PSP from the nanofibers was obtained, due to their higher surface area and characteristic surface morphology that permitted higher wettability and thus, faster erosion. Taste-assessment study using the electronic-tongue quantified the bitterness threshold of the drug and its aversiveness concentration (2.79 mM). Therefore, a taste-masking strategy would be useful when further formulating PSP as an OD formulation
Mollusk carbonate thermal behaviour and its implications in understanding prehistoric fire events in shell middens
Archaeological shell middens are particularly important for reconstructing prehistoric human subsistence strategies. However, very little is known about shellfish processing, especially when related to the use of fire for dietary and disposal purposes. To shed light on prehistoric food processing techniques, an experimental study was undertaken on modern gastropod shells (Phorcus lineatus). The shells were exposed to high temperatures (200-700 °C) to investigate subsequent mineralogy and macro- and microstructural changes. Afterwards, the three-pronged approach was applied to archaeological shells from Haua Fteah cave, Libya (Phorcus turbinatus) and from shell midden sites in the United Arab Emirates (Anadara uropigimelana and Terebralia palustris) to determine exposure temperatures. Results indicated that shells from the Haua Fteah were exposed to high temperatures (600 - 700 °C) during the Mesolithic period (c. 12.7 - 9 ka), whereas specimens from the Neolithic period (c. 8.5 - 5.4 ka) were mainly exposed to lower temperatures (300 - 500 °C). The thermally-induced changes in A. uropigimelana and T. palustris shells from the South East Arabian archaeological sites were similar to those seen in Phorcus spp. suggesting a broad applicability of the experimental results at an interspecific level. Although heat significantly altered the appearance and mineralogy of the shells, 14CAMS ages obtained on burnt shells fit within the expected age ranges for their associated archaeological contexts, indicating that robust radiocarbon ages may still be obtained from burnt shells. Our study indicates that the combination of microstructural and mineralogical observations can provide important information to infer shellfish processing strategies in prehistoric cultures and their change through time.Funding for this study was kindly provided by the EU within the framework (FP7) of the Marie Curie International Training Network ARAMACC (604802) to SM and by the Alexander von Humboldt Postdoctoral Fellowship (1151310) and McKenzie Postdoctoral Fellowship to AP. The Haua Fteah excavations were undertaken with the permission of the Libyan Department of Antiquities and with funding to GB from the Society for Libyan Studies and from the European Research Council (Advanced Investigator Grant 230421), whose support is also gratefully acknowledge
Space-use patterns highlight behavioural differences linked to lameness, parity, and days in milk in barn-housed dairy cows
This is the author accepted manuscript. The final version is available from Public Library of Science (PLoS) via the DOI in this record.Lameness is a key health and welfare issue affecting commercial herds of dairy cattle, with potentially significant economic impacts due to the expense of treatment and lost milk production. Existing lameness detection methods can be time-intensive, and under-detection
remains a significant problem leading to delayed or missed treatment. Hence, there is a need for automated monitoring systems that can quickly and accurately detect lameness in individual cows within commercial dairy herds. Recent advances in sensor tracking technology have made it possible to observe the movement, behaviour and space-use of a range of animal species over extended time-scales. However, little is known about how observed movement behaviour and space-use patterns in individual dairy cattle relate to lameness, or to other possible confounding factors such as parity or number of days in milk. In this cross-sectional study, ten lame and ten non-lame barn-housed dairy cows were classified through mobility scoring and subsequently 55 tracked using a wireless local positioning system. Nearly 900,000 spatial locations were recorded in total, allowing a range of movement and space-use measures to be determined for each individual cow. Using linear models, we highlight where lameness, parity, and the number of days in milk have a significant effect on the observed space-use patterns. Non-lame cows spent more time, and had higher site fidelity (on a day-to-day basis they were more likely to revisit areas they had visited previously), in the feeding area. Non-lame cows also had a larger full range size within the barn. In contrast, lame cows spent more time, and had a higher site-fidelity, in the cubicle (resting) areas of the barn than non-lame cows. Higher parity cows were found to spend more time in the right-hand-side area of the barn, closer to the passageway to the milking parlour. The number of days in milk was found to positively affect the core range size, but with a negative interaction effect with lameness. Using a simple predictive model, we demonstrate how it is possible to accurately determine the lameness status of all individual cows within the study using only two observed space-use measures, the proportion of time spent in the feeding area and the full range size. Our findings suggest that differences in individual movement and space-use behaviour could be used as indicators of health status for automated monitoring within a Precision Livestock Farming approach, potentially leading to
faster diagnosis and treatment, and improved animal welfare for dairy cattle and other managed animal species
Recommended from our members
In vitro and in vivo biological assessment of dual drug-loaded coaxial nanofibers for the treatment of corneal abrasion
The treatment of corneal abrasion currently involves the topical administration of antibiotics, with moxifloxacin HCl (0.5% w/v) eye drops being one of the most widely used treatments. Our previous work (Tawfik et al., 2020) involved the development of coaxial poly-lactic-co-glycolic acid (PLGA) and polyvinylpyrrolidone (PVP) nanofibers loaded with the antibiotic moxifloxacin HCl and the anti-scarring agent pirfenidone in the core (PVP) and shell (PLGA) respectively, with a view to the system comprising an ocular insert for the combination therapy of corneal abrasion. In this study, we examine the antimicrobial, anti-scarring and pharmacokinetic properties of the fibers alongside consideration of their toxicity and propensity for irritation. Minimum inhibitory concentration and zone of inhibition studies against S. aureus and P. aeruginosa were performed, while fibroblast cell viability and α-smooth muscle actin (α-SMA, a biomarker for scar formation) were measured using MTT and Western Blot assays, respectively. Pharmacokinetic studies and efficacy against infection were performed using a rabbit model, while ocular irritancy was assessed using the Draize test. The studies demonstrated that the antimicrobial activity of the moxifloxacin HCl was preserved following encapsulation into the nanofibers, while the downregulation of α-SMA was demonstrated using concentrations below the IC20 values (concentration required to decrease corneal fibroblast viability by no more than 20%). The pharmacokinetic study showed retention and sustained release of the moxifloxacin HCl over a 24-hour period, in contrast to equivalent eye drops which required four times daily dosing. Evidence of low level (according to the MMTS scale) irritation was detected for the nanofiber systems. Overall, the study has demonstrated that the dual drug-loaded nanofiber system shows potential for once daily dosing as an ocular insert for the treatment of corneal abrasion
Metagenomic insights into diazotrophic communities across Arctic glacier forefields
Microbial nitrogen fixation is crucial for building labile nitrogen stocks and facilitating higher plant colonization in oligotrophic glacier forefield soils. Here, the diazotrophic bacterial community structure across four Arctic glacier forefields was investigated using metagenomic analysis. In total, 70 soil metagenomes were used for taxonomic interpretation based on 185 nitrogenase (nif) sequences, extracted from assembled contigs. The low number of recovered genes highlights the need for deeper sequencing in some diverse samples, to uncover the complete microbial populations. A key group of forefield diazotrophs, found throughout the forefields, was identified using a nifH phylogeny, associated with nifH Cluster I and III. Sequences related most closely to groups including Alphaproteobacteria, Betaproteobacteria, Cyanobacteria and Firmicutes. Using multiple nif genes in a Last Common Ancestor analysis revealed a diverse range of diazotrophs across the forefields. Key organisms identified across the forefields included Nostoc, Geobacter, Polaromonas and Frankia. Nitrogen fixers which are symbiotic with plants were also identified, through the presence of root associated diazotrophs, which fix nitrogen in return for reduced carbon. Additional nitrogen fixers identified in forefield soils were metabolically diverse, including fermentative and sulphur cycling bacteria, halophiles and anaerobes
Using animal-mounted sensor technology and machine learning to predict time-to-calving in beef and dairy cows
Worldwide, there is a trend towards increased herd sizes, and the animal-to-stockman ratio is increasing within the beef and dairy sectors; thus, the time available to monitoring individual animals is reducing. The behaviour of cows is known to change in the hours prior to parturition, for example, less time ruminating and eating and increased activity level and tail-raise events. These behaviours can be monitored non-invasively using animal-mounted sensors. Thus, behavioural traits are ideal variables for the prediction of calving. This study explored the potential of two sensor technologies for their capabilities in predicting when calf expulsion should be expected. Two trials were conducted at separate locations: (i) beef cows (n = 144) and (ii) dairy cows (n = 110). Two sensors were deployed on each cow: (1) Afimilk Silent Herdsman (SHM) collars monitoring time spent ruminating (RUM), eating (EAT) and the relative activity level (ACT) of the cow, and (2) tail-mounted Axivity accelerometers to detect tail-raise events (TAIL). The exact time the calf was expelled from the cow was determined by viewing closed-circuit television camera footage. Machine learning random forest algorithms were developed to predict when calf expulsion should be expected using single-sensor variables and by integrating multiple-sensor data-streams. The performance of the models was tested using the Matthew’s correlation coefficient (MCC), the area under the curve, and the sensitivity and specificity of predictions. The TAIL model was slightly better at predicting calving within a 5-h window for beef cows (MCC = 0.31) than for dairy cows (MCC = 0.29). The TAIL + RUM + EAT models were equally as good at predicting calving within a 5-h window for beef and dairy cows (MCC = 0.32 for both models). Combining data-streams from SHM and tail sensors did not substantially improve model performance over tail sensors alone; therefore, hour-by-hour algorithms for the prediction of time of calf expulsion were developed using tail sensor data. Optimal classification occurred at 2 h prior to calving for both beef (MCC = 0.29) and dairy cows (MCC = 0.25). This study showed that tail sensors alone are adequate for the prediction of parturition and that the optimal time for prediction is 2 h before expulsion of the calf
Land gastropod piercing during the Late Pleistocene and Early Holocene in the Haua Fteah, Libya
Land snail shell is a frequent constituent of archaeological sites, but it is rarely clear whether it represents food refuse, the remains of scavengers, or evidence for natural processes. Piercing of land snail shells enables the animal to be extracted from the shell and thus provides direct evidence for human consumption. We report pierced land snails from the Haua Fteah, Libya. The earliest pierced land snail shell in the Haua Fteah pre-dates the Last Interglacial, while the most recent is Late-Classical in age, but the largest quantities are in layers of Late-Glacial and earliest Holocene age, where they are associated with atypical microliths which may have been used to pierce shells to enable easy extraction of the animal
Effects of pre-filmed FeCO3 on flow-induced corrosion and erosion-corrosion in the absence and presence of corrosion inhibitor at 60 °C
In CO2 environments, an increase in the temperature can influence carbon steel flow-induced corrosion (FIC) and erosion-corrosion (EC) degradation processes. Increasing temperature typically results in the acceleration of electrochemical degradation mechanisms in the absence of protective corrosion product layers. Furthermore, the presence of sand in corrosive process fluids could aggravate the service conditions. Although protective iron carbonate (FeCO3) film or/and corrosion inhibitors are capable of suppressing corrosion in CO2-containing environments typical of oil and gas production, their ability to suppress degradation and their associated mechanisms in erosion-corrosion environments is less understood. This work focuses on understanding the ability of FeCO3 to protect the steel surface in the absence and presence of corrosion inhibitor and their interactions in flow-induced and erosion-corrosion systems at 60 °C. The effect of the temperature increase is investigated based on results obtained in a previous study performed at 25 °C. FeCO3 filmed carbon steel specimens were developed using an autoclave at 60 °C, pH 6.6 and 30 bar in a 1.5 wt% NaCl CO2-saturated solution over 48 h. The FeCO3 covered specimens were evaluated in FIC and EC environments at 60 °C and a flow velocity of 15 m/s in the presence and absence of 1000 mg/L sand and 100 ppm of a commercially available corrosion inhibitor. Results indicate that the sole presence of an FeCO3 layer is not sufficient to retard the corrosive process of carbon steel at 60 °C under EC conditions. However, the commercial corrosion inhibitor was observed to worked synergistically with the FeCO3 layer to reduce the corrosion degradation component in both the presence and absence of sand particles. The erosion component is also reduced in erosion-corrosion environments as a result of the combined presence of FeCO3 and corrosion inhibitor
The personal experience of parenting a child with Juvenile Huntington’s Disease: perceptions across Europe
The study reported here presents a detailed description of what it is like to parent a child with juvenile Huntington’s disease in families across four European countries. Its primary aim was to develop and extend findings from a previous UK study. The study recruited parents from four European countries: Holland, Italy, Poland and Sweden,. A secondary aim was to see the extent to which the findings from the UK study were repeated across Europe and the degree of commonality or divergence across the different countries. Fourteen parents who were the primary caregiver took part in a semistructured interview. These were analyzed using an established qualitative methodology, interpretative phenomenological analysis. Five analytic themes were derived from the analysis: the early signs of something wrong; parental understanding of juvenile Huntington’s disease; living with the disease; other people’s knowledge and understanding; and need for support. These are discussed in light of the considerable convergence between the experiences of families in the United Kingdom and elsewhere in Europe
The impact of provider surgical volumes on survival in children with primary tumors of the central nervous system—a population-based study
- …