57 research outputs found
Correlations between standard accelerated tests for protective organic coatings and field performance
Accelerated testing is widely used in development and pre-qualification of protective organic coatings. In this work 26 coating systems have been investigated in a 2-year C5 atmospheric exposure field test, ISO 9227 salt spray test, ISO 12944-9 cyclic ageing and ISO 16773 electrochemical impedance spectroscopy measurement of coating resistance. Of the 26 coating systems, 16 have epoxy mastic primers and 10 have zinc rich epoxy primers. In the field test, the zinc rich primer improved corrosion creep resistance from scribe by a factor of about 10. However, this is not reflected in any of the accelerated lab tests. The lab tests all show rather poor correlation to the field test with respect to corrosion creep. All the coatings had little corrosion creep from scribe in the field test, even the coating systems with epoxy mastic primers. The large focus on this parameter in coating pre-qualification testing, e.g. in ISO 12944-6 and 12944-9, may therefore not be justified.publishedVersio
Recommended from our members
The impact of binding energies on the necessary conditions in aerosol deposition
Copyriht © 2023 The Authors. Aerosol deposition (AD) enables the formation of dense ceramic coatings by high velocity impact of submicron-sized particles. However, up to now, it is still not clear how the material properties of the ceramic powder particles influence their impact behavior and possible success in layer build-up in AD. Therefore, in order to provide a broader understanding, this study utilizes molecular dynamic (MD) simulations to investigate the impacts of single-crystalline particles while manipulating binding energies, particle sizes, and impact velocities, addressing a rather wide range of different materials and process conditions. The findings reveal that increasing binding energies from 0.22 to 0.96 eV necessitates up to three times higher velocities to reach thresholds for bonding and fragmentation, which are linked to potential layer formation. For conditions above the velocity thresholds given by individual binding energies, similarities in the deformation and fragmentation patterns are derived. Consequently, rough estimations regarding the required particle impact velocities for AD of different materials can be inferred.Bahman Daneshian received funding from the project ‘KIBIDZ – Intelligente Brandgefahrenanalyse für Gebäude und Schutz der Rettungskräfte durch Künstliche Intelligenz und Digitale Brandgebäudezwillinge’. The project is funded by dtec.bw Digitalization and Technology Research Center of the Bundeswehr. dtec.bw is funded by the European Union – NextGenerationEU. Wolfgang E. Weber expressly acknowledges the financial support of the research work on this article within the Research Unit 3022 – Ultrasonic Monitoring of Fibre Metal Laminates Using Integrated Sensors – by the German Research Foundation (Deutsche Forschungsgemeinschaft (DFG)).
Open access funding enabled and organized by Projekt DEAL
Impacts of climate change on soybean production under different treatments of field experiments considering the uncertainty of general circulation models
Earth is faced with dramatic changes in the weather systems, which leads to climate change. Climate change affects water resources and crop production. In this study, five and seven general circulation models (GCMs) were respectively collected via the IPCC Fourth and Fifth Assessment Reports. Emission scenarios including B1, A1B, and A2 for AR4 and RCP2.6 and RCP8.5 for AR5 were applied to predict future climate change. The weighting method of mean observed temperature-precipitation (MOTP) was utilized to compute uncertainty related to different climate models. The scenario files made by ΔT and ΔP were applied to the downscaled model of LARS-WG to generate weighted multi-model ensemble means of temperature and precipitation for the period 2020–2039 centered on 2030s. These ensemble means were incorporated into the calibrated AquaCrop model to predict final yield and biomass. In this study, soybean data were applied for four different varieties under three irrigation treatments in field experiments carried out at Karaj Seed and Plant Improvement Institute in two successive years. However, the results of statistical analysis between the model output and observed data for all varieties and irrigation treatments in the calibration year (2010) and validation year (2011) were the same at the 95% confidence level. It is suggested that AquaCrop is a valid model to predict yield and biomass for the study area in the future. Furthermore, comparing future climatic variables to the historical period during the soybean growing season showed enhancement of these variables by the 2030s. The amplitude change of temperature was larger in AR5, whereas the amplitude change of precipitation and CO2 were larger in AR4. The soybean yield and biomass increased for all treatments in the 2030 s with positive correlation with the climatic variables. The maximum temperature represented the most significant correlation with yield and biomass for almost all treatments. Finally, soybeans might achieve an optimal threshold temperature in the future, leading to yield increases in the 2030s
Recommended from our members
Size Effects of Brittle Particles in Aerosol Deposition—Molecular Dynamics Simulation
Copyright © The Author(s) 2021. Up to now, the role of particle sizes on the impact behavior of ceramic particles in aerosol deposition not yet fully understood. Hence, with the aim to supply a more general understanding, modeling series of low strain rate compression and high-speed impact were performed by molecular dynamics on single-crystalline particles in sizes of 10-300 nm that are tuned to match mechanical properties of TiO2-anatase. The modeling results reveal that particles with original diameter of 25-75 nm exhibit three different impact behaviors that could be distinguished as (i) rebounding, (ii) bonding and (iii) fragmentation, depending on their initial impact velocity. In contrast, particles larger than 75 nm do not exhibit the bonding behavior. Detailed stress and strain field distributions reveal that combination of “localized inelastic deformation” along the slip systems and “shear localization” cause bonding of the small and large particles to the substrate. The analyses of associated temperature rise by the inelastic deformation revealed that heat diffusion at these small scales depend on size. Whereas small particles could reach a rather homogeneous temperature distribution, the evolved heat in the larger ones keeps rather localized to areas of highest deformation and may support deformation and the formation of dense layers in aerosol deposition.young investigator research group FOCUS H2 (BMBF EnMat-514-211)
Recommended from our members
Features of ceramic nanoparticle deformation in aerosol deposition explored by molecular dynamics simulation
© 2021 The Authors. The deformation and bonding of particles in Aerosol Deposition (AD) is a topic of growing technological interest for solid-state coating and additive manufacturing with ceramic materials. The core feature of the AD process is the unexpected plasticity of ceramics at high strain rates and small length scales, which is also a topic of general interest for understanding the response of intrinsically brittle materials to dynamic deformation. We explore this feature through computational analysis of the impact of ceramic particles – modelled based on a Lennard-Jones description of submicron TiO2-anatase particles in a two-dimensional molecular-dynamics system – onto a substrate at a range of impact velocities (100–800 m/s). The deformation behaviour of the particle for each impact velocity was analysed with respect to the evolution of the stress, strain, and temperature fields. The results reveal indications of dislocation-based plasticity within a certain velocity regime. This velocity regime, which becomes narrower with increasing the particle size, coincides incidentally with bonding of particles to the substrate in AD. The results also show that outside this regime, the impact is associated predominantly with either rebounding (at lower velocities) or particle fracture (at higher velocities). The simulation results are interpreted in view of a phenomenological model of fragmentation, considering the interplay between the material properties, such as the fracture energy, and the kinetic energy of particles upon impact. Based on the simulations and the analytical model, a window of deposition is proposed for AD.Young investigator research group FOCUS H2 (No. 03SF0479)
Highlight report: Launch of a large integrated European in vitro toxicology project: EU-ToxRisk.
The integrated European project, EU-ToxRisk, proudly sees itself as "flagship" exploring new alternative-to-animal approaches to chemical safety evaluation. It promotes mechanism-based toxicity testing and risk assessment according to the principles laid down for toxicology for the twenty-first century. The project was officially launched in January 2016 with a kickoff meeting in Egmond aan Zee, the Netherlands. Over 100 scientists representing academia and industry as well as regulatory authorities attended the inaugural meeting. The project will integrate advances in in vitro and in silico toxicology, read-across methods, and adverse outcome pathways. EU-ToxRisk will continue to make use of the case study strategy deployed in SEURAT-1, a FP7 initiative ended in December 2015. Even though the development of new non-animal methods is one target of EU-ToxRisk, the project puts special emphasis on their acceptance and implementation in regulatory contexts. This €30 million Horizon 2020 project involves 38 European partners and one from the USA. EU-ToxRisk aims at the "development of a new way of risk assessment."Toxicolog
Consensus Report on the Future of Animal-Free Systemic Toxicity Testing
Since March 2013, animal use for cosmetics testing for the European market has been banned. This requires a renewed view on risk assessment in this field. However, in other fields as well, traditional animal experimentation does not always satisfy requirements in safety testing, as the need for human-relevant information is ever increasing. A general strategy for animal-free test approaches was outlined by the US National Research Council’s vision document for Toxicity Testing in the 21st Century in 2007. It is now possible to provide a more defined roadmap on how to implement this vision for the four principal areas of systemic toxicity evaluation: repeat dose organ toxicity, carcinogenicity, reproductive toxicity and allergy induction (skin sensitization), as well as for the evaluation of toxicant metabolism (toxicokinetics) (Fig. 1). CAAT-Europe assembled experts from Europe, America and Asia to design a scientific roadmap for future risk assessment approaches and the outcome was then further discussed and refined in two consensus meetings with over 200 stakeholders. The key recommendations include: focusing on improving existing methods rather than favoring de novo design; combining hazard testing with toxicokinetics predictions; developing integrated test strategies; incorporating new high content endpoints to classical assays; evolving test validation procedures; promoting collaboration and data-sharing of different industrial sectors; integrating new disciplines, such as systems biology and high throughput screening; and involving regulators early on in the test development process. A focus on data quality, combined with increased attention to the scientific background of a test method, will be important drivers. Information from each test system should be mapped along adverse outcome pathways. Finally, quantitative information on all factors and key events will be fed into systems biology models that allow a probabilistic risk assessment with flexible adaptation to exposure scenarios and individual risk factors
State-of-the-art of 3D cultures (organs-on-a-chip) in safety testing and pathophysiology.
Integrated approaches using different in vitro methods in combination with bioinformatics can (i) increase the success rate and speed of drug development; (ii) improve the accuracy of toxicological risk assessment; and (iii) increase our understanding of disease. Three-dimensional (3D) cell culture models are important building blocks of this strategy which has emerged during the last years. The majority of these models are organotypic, i.e., they aim to reproduce major functions of an organ or organ system. This implies in many cases that more than one cell type forms the 3D structure, and often matrix elements play an important role. This review summarizes the state of the art concerning commonalities of the different models. For instance, the theory of mass transport/metabolite exchange in 3D systems and the special analytical requirements for test endpoints in organotypic cultures are discussed in detail. In the next part, 3D model systems for selected organs--liver, lung, skin, brain--are presented and characterized in dedicated chapters. Also, 3D approaches to the modeling of tumors are presented and discussed. All chapters give a historical background, illustrate the large variety of approaches, and highlight up- and downsides as well as specific requirements. Moreover, they refer to the application in disease modeling, drug discovery and safety assessment. Finally, consensus recommendations indicate a roadmap for the successful implementation of 3D models in routine screening. It is expected that the use of such models will accelerate progress by reducing error rates and wrong predictions from compound testing
Structural and functional studies reveal the molecular basis of substrate promiscuity of a glycosyltransferase originating from a major agricultural pest
Researchers’ attitudes to the 3Rs - An upturned hierarchy?
Animal use in biomedical research is generally justified by its potential benefits to the health of humans, or other animals, or the environment. However, ethical acceptability also requires scientists to limit harm to animals in their research. Training in laboratory animal science (LAS) helps scientists to do this by promoting best practice and the 3Rs. This study evaluated scientists’ awareness and application of the 3Rs, and their approach to other ethical issues in animal research. It was based on an online survey of participants in LAS courses held in eight venues in four European countries: Portugal (Porto, Braga), Germany (Munich, Heidelberg), Switzerland (Basel, Lausanne, Zurich), and Denmark (Copenhagen). The survey questions were designed to assess general attitudes to animal use in biomedical research, Replacement alternatives, Reduction and Refinement conflicts, and harm-benefit analysis. The survey was conducted twice: immediately before the course (‘BC’, N = 310) and as a follow-up six months after the course (‘AC’, N = 127). While courses do appear to raise awareness of the 3Rs, they had no measurable effect on the existing low level of belief that animal experimentation can be fully replaced by non-animal methods. Most researchers acknowledged ethical issues with their work and reported that they discussed these with their peers. The level of an animal’s welfare, and especially the prevention of pain, was regarded as the most pressing ethical issue, and as more important than the number of animals used or the use of animals as such. Refinement was considered more feasible than Replacement, as well as more urgent, and was also favoured over Reduction. Respondents in the survey reversed the ‘hierarchy’ of the 3Rs proposed by their architects, Russell and Burch, prioritizing Refinement over Reduction, and Reduction over Replacement. This ordering may conflict with the expectations of the public and regulators.</div
- …