User-Experience with Haptic Feedback Technologies and Text Input in Interactive Multimedia Devices

Remote control devices are commonly used for interaction with multimedia equipment and applications (e.g., smart TVs, gaming, etc.). To improve conventional keypad-based technologies, haptic feedback and user input capabilities are being developed for enhancing the UX and providing advanced functionalities in remote control devices. Although the sensation provided by haptic feedback is similar to mechanical push buttons, the former offers much greater flexibility, due to the possibility of dynamically choosing different mechanical effects and associating different functions to each of them. However, selecting the best haptic feedback effects among the wide variety that is currently enabled by recent technologies, remains a challenge for design engineers aiming to optimise the UX. Rich interaction further requires text input capability, which greatly influences the UX. This work is a contribution towards UX evaluation of remote control devices with haptic feedback and text input. A user evaluation study of a wide variety of haptic feedback effects and text input methods is presented, considering different technologies and different number of actuators on a device. The user preferences, given by subjective evaluation scores, demonstrate that haptic feedback has undoubtedly a positive impact on the UX. Moreover, it is also shown that different levels of UX are obtained, according to the technological characteristics of the haptic actuators and how many of them are used on the device.info:eu-repo/semantics/publishedVersio

Predictors of academic efficacy and dropout intention in university students: Can engagement suppress burnout?

In this study we modelled possible causes and consequences of student burnout and engagement on academic efficacy and dropout intention in university students. Further we asked, can student engagement protect against the effects of burnout? In total 4,061 university students from Portugal, Brazil, Mozambique, the United Kingdom, the United States of America, Finland, Serbia, and Macao SAR, Taiwan participated in this study. With the data collected we analyzed the influence of Social Support, Coping Strategies, and school/course related variables on student engagement and burnout using structural equation modeling. We also analyzed the effect of student engagement, student burnout, and their interaction, on Academic Performance and Dropout Intention. We found that both student engagement and burnout are good predictors of subjective academic performance and dropout intention. However, student burnout suppresses the effect of student engagement on these variables. This result has strong implications for practitioners and administrators. To prevent student dropout, it is not enough to promote student engagement-additionally, and importantly, levels of student burnout must be kept low. Other variables such as social support and coping strategies are also relevant predictors of student engagement and burnout and should be considered when implementing preventive actions, self-help and guided intervention programs for college students

Intraurban variations in adult mortality in a large Latin American City

Abstract Urbanization is high and growing in low- and middle-income countries, but intraurban variations in adult health have been infrequently examined. We used spatial analysis methods to investigate spatial variation in total, cardiovascular disease, respiratory disease, and neoplasm adult mortality in Buenos Aires, Argentina, a large city within a middle-income country in Latin America. Conditional autoregressive models were used to examine the contribution of socioeconomic inequalities to the spatial patterning observed. Spatial autocorrelation was present in both men and women for total deaths, cardiovascular deaths, and other causes of death (Moran’s Is ranging from 0.15 to 0.37). There was some spatial autocorrelation for respiratory deaths, which was stronger in men than in women. Neoplasm deaths were not spatially patterned. Socioeconomic disadvantage explained some of this spatial patterning and was strongly associated with death from all causes except respiratory deaths in women and neoplasms in men and women [relative rates (RR) for 90th vs 10th percentile of percent of adults with incomplete high school and 95% confidence intervals: 1.23 and 1.09–1.39 vs 1.24 and 1.08–1.42 for total deaths in men and women, respectively; 1.36 and 1.15–1.60 vs 1.22 and 1.01–1.47 for cardiovascular deaths; 1.21 and 0.97–1.52 vs 1.07 and 0.85–1.34 for respiratory deaths; 0.94 and 0.85–1.04 vs 1.03 and 0.87–1.22 for neoplasms; and 1.49 and 1.20–1.85 vs 1.63 and 1.31–2.03 for other deaths].There is substantial intraurban variation in risk of death within cities. This spatial variability was present for multiple causes of death and is partly explained by the spatial patterning of socioeconomic disadvantage. Our results highlight the pervasive role of space and social inequalities in shaping life and death within large cities.http://deepblue.lib.umich.edu/bitstream/2027.42/57778/1/Intraurban variations in Adult Mortality in a large Latin American City.pd

Influence of polishing procedures on the surface roughness of dental ceramics made by different techniques

The aim of this study was to evaluate the influence of 2 different surface polishing procedures - glazing (GZ) and manual polishing (MP) - on the roughness of ceramics processed by computer-aided design/computer-aided manufacturing (CAD/CAM) and conventional systems (stratification technique). Eighty ceramic discs (diameter: 8 mm, thickness: 1 mm) were prepared and divided among 8 groups (n = 10) according to the type of ceramic disc and polishing method: 4 GZ and 4 MP. Specimens were glazed according to each manufacturer's recommendations. Two silicone polishing points were used on the ceramic surface for manual polishing. Roughness was measured using a surface roughness tester. The roughness measurements were made along a distance of 2 mm on the sample surface and the speed of reading was 0.1 mm/s. Three measurements were taken for each sample. The data (μm) were statistically analyzed using analysis of variance (ANOVA) and Tukey's test (α = 0.05). Qualitative analysis was performed using scanning electron microscopy (SEM). The mean (± SD) roughness values obtained for GZ were: 1.1 ± 0.40 μm; 1.0 ± 0.31 μm; 1.6 ± 0.31 μm; and 2.2 ± 0.73 μm. For MP, the mean values were: 0.66 ± 0.13 μm; 0.43 ± 0.14 μm; 1.6 ± 0.55 μm; and 2.0 ± 0.63 μm. The mean roughness values were significantly affected by the ceramic type (P = 0.0001) and polishing technique (P = 0.0047). The SEM images confirmed the roughness data. The manually polished glass CAD/CAM ceramics promoted lower surface roughness than did the glazed feldspathic dental ceramics