24 research outputs found
Recommended from our members
High-temperature order–disorder transitions in the skutterudites CoGe1.5Q1.5 (Q=S, Te)
The temperature dependence of anion ordering in the skutterudites CoGe1.5Q1.5 (Q=S, Te) has been investigated by powder neutron diffraction. Both materials adopt a rhombohedral structure at room temperature (space group R-3 ) in which the anions are ordered trans to each other within Ge2Q2 rings. In CoGe1.5S1.5, anion ordering is preserved up to the melting point of 950 °C. However, rhombohedral CoGe1.5Te1.5 undergoes a phase transition at 610 °C involving a change to cubic symmetry (space group Im-3). In the high-temperature modification, there is a statistical distribution of anions over the available sites within the Ge2Te2 rings. The structural transition involves a reduction in the degree of distortion of the Ge2Te2 rings which progressively transform from a rhombus to a rectangular shape. The effect of this transition on the thermoelectric properties has been investigated
Recommended from our members
Ordered-defect sulfides as thermoelectric materials
The thermoelectric behaviour of the transition-metal disulphides n-type NiCr2S4 and p-type CuCrS2 is investigated. Materials prepared by high-temperature reaction were consolidated using cold-pressing and sintering, hot-pressing (HP) in graphite dies or spark-plasma sintering (SPS) in tungsten carbide dies. The consolidation conditions have a marked influence on the electrical transport properties. In addition to the effect on sample density, altering the consolidation conditions results in changes to the sample composition, including the formation of impurity phases. Maximum room-temperature power factors are 0.18 mW m-1 K-2 and 0.09 mW m-1 K-2 for NiCr2S4 and CuCrS2, respectively. Thermal conductivities of ca. 1.4 and 1.2 W m-1 K-1 lead to figures of merit of 0.024 and 0.023 for NiCr2S4 and CuCrS2, respectively
Halogen effects on ordering and bonding of CH<sub>3</sub>NH<sub>3</sub> <sup>+</sup> in CH<sub>3</sub>NH<sub>3</sub>PbX<sub>3</sub> (X = Cl, Br, I) hybrid perovskites:a vibrational spectroscopic study
This study reports Raman and infrared spectra of hybrid organic-inorganic MAPbX3 perovskites (MA = CH3NH3, X = Cl, Br, I) and their mixed-halide derivatives. Raman spectra were recorded at three laser wavelengths (514, 785, and 1064 nm) under on- and off-resonance conditions, as well as at room temperature and 100 K. The use of different excitation wavelengths allowed the unambiguous acquisition of "true" Raman spectra from the perovskites, without degradation or photoinduced structural changes. Low-frequency PbX vibrational modes were thoroughly identified by comparison of Raman and far-IR results. Red Raman frequency shifts for almost all MA vibrations from 200 to 3200 cm-1, and particularly intense for the torsional mode, were observed toward heavy halide derivatives, indicative of strengthening the interaction between halides and the organic cation inside the inorganic cage. Different MA-X bonding schemes are evidenced by torsional mode pairs emerging in the orthorhombic phase. MAPbBr3 was further characterized by variable temperature Raman measurements (100-295 K). Broadening of the MA rocking mode slightly above the tetragonal I to II phase transition is connected with disorder of the MA cation. Our results advance the understanding of perovksite materials properties (ferroelectric domain formation, anomalous hysteresis) and their use as efficient light absorbers in solar cells.</p
Halogen effects on ordering and bonding of CH<sub>3</sub>NH<sub>3</sub> <sup>+</sup> in CH<sub>3</sub>NH<sub>3</sub>PbX<sub>3</sub> (X = Cl, Br, I) hybrid perovskites:a vibrational spectroscopic study
This study reports Raman and infrared
spectra of hybrid organic–inorganic
MAPbX<sub>3</sub> perovskites (MA = CH<sub>3</sub>NH<sub>3</sub>,
X = Cl, Br, I) and their mixed-halide derivatives. Raman spectra were
recorded at three laser wavelengths (514, 785, and 1064 nm) under
on- and off-resonance conditions, as well as at room temperature and
100 K. The use of different excitation wavelengths allowed the unambiguous
acquisition of “true” Raman spectra from the perovskites,
without degradation or photoinduced structural changes. Low-frequency
PbX vibrational modes were thoroughly identified by comparison of
Raman and far-IR results. Red Raman frequency shifts for almost all
MA vibrations from 200 to 3200 cm<sup>–1</sup>, and particularly
intense for the torsional mode, were observed toward heavy halide
derivatives, indicative of strengthening the interaction between halides
and the organic cation inside the inorganic cage. Different MA–X
bonding schemes are evidenced by torsional mode pairs emerging in
the orthorhombic phase. MAPbBr<sub>3</sub> was further characterized
by variable temperature Raman measurements (100–295 K). Broadening
of the MA rocking mode slightly above the tetragonal I to II phase
transition is connected with disorder of the MA cation. Our results
advance the understanding of perovksite materials properties (ferroelectric
domain formation, anomalous hysteresis) and their use as efficient
light absorbers in solar cells
The influence of mobile copper ions on the glass-like thermal conductivity of copper-rich tetrahedrites
Tetrahedrites are promising p-type thermoelectric materials for energy recovery. We present here the first investigation of the structure and thermoelectric properties of copper-rich tetrahedrites, Cu12+xSb4S13 (0 0 consist of two tetrahedrite phases. In-situ neutron diffraction data demonstrate that on heating, the two tetrahedrite phases coalesce into a single tetrahedrite phase at temperatures between 493 and 553 K, and that this transition shows marked hysteresis on cooling. Our structural data indicate that copper ions become mobile above 393 K. Marked changes in the temperature dependence of the electrical and thermal transport properties of the copper-rich phases occur at the onset of copper mobility. Excess copper leads to a significant reduction in the total thermal conductivity, which for the nominal composition Cu14Sb4S13 reaches a value as low as 0.44 W m-1K-1 at room temperature, and to thermoelectric properties consistent with phonon liquid electron crystal (PLEC) behaviour
A Silanol-Functionalized Polyoxometalate with Excellent Electron Transfer Mediating Behavior to ZnO and TiO 2 Cathode Interlayers for Highly Efficient and Extremely Stable Polymer Solar Cells
Combining high efficiency and long lifetime under ambient conditions still poses a major challenge towards commercialization of polymer solar cells. Here we report a facile strategy that can simultaneously enhance the efficiency and temporal stability of inverted photovoltaic architectures. Inclusion of a silanol-functionalized organic–inorganic hybrid polyoxometalate derived from a PW9O34 lacunary phosphotungstate anion, namely (nBu4N)3[PW9O34(tBuSiOH)3], significantly increases the effectiveness of the electron collecting interface, which consists of a metal oxide such as titanium dioxide or zinc oxide, and leads to a high efficiency of 6.51% for single-junction structures based on poly(3-hexylthiophene):indene-C60 bisadduct (P3HT:IC60BA) blends. The above favourable outcome stems from a large decrease in the work function, an effective surface passivation and a decrease in the surface energy of metal oxides which synergistically result in the outstanding electron transfer mediating capability of the functionalized polyoxometalate. In addition, the insertion of a silanol-functionalized polyoxometalate layer significantly enhances the ambient stability of unencapsulated devices which retain nearly 90% of their original efficiencies (T90) after 1000 hours
Recommended from our members
Synthesis and thermoelectric properties of the new skutterudites Yb x Fe2Ni2Sb12 (0 ≤ x ≤ 0.4)
The family of materials Yb x Fe2 Ni 2Sb12 (0 ≤ x ≤ 0.4) has been prepared by solid-state synthesis from the pure elements and characterized by powder X-ray diffraction. These materials crystallize in the skutterudite structure, with the framework voids partially filled with Yb atoms. Electrical resistivity, Seebeck coefficient and thermal conductivity measurements have been performed on hot-pressed samples, and indicate that the thermoelectric performance is significantly improved by increasing the Yb content. The decomposition of the compounds under oxidizing atmosphere at elevated temperatures has also been studied by thermogravimetric analysis. The physical properties and thermal stability of the new compounds are further discussed in comparison with those of the reported isostructural and isoelectronic Yb x Co4Sb12 (0 ≤ x ≤ 0.19)
Synthesis, crystal structure and luminescence of [(CH<sub>3</sub>)<sub>3</sub>S]<sub>2</sub>ZrCl<sub>6</sub>
The current work reports on the synthesis, crystal structure and optoelectronic properties of (Me3S)2ZrCl6, prepared by reacting the solid precursors (Me3S)Cl and ZrCl4 in pyrex tubes at 150 °C under vacuum. According to X-ray powder diffraction and Rietveld analysis, (Me3S)2ZrCl6 crystallizes in the cubic space group Pa-3 (No. 205) with a = 12.4664(1) Å. The crystal structure consists of isolated trigonal pyramidal trimethylsulfonium cations and octahedral [ZrCl6]2- anions with weak hydrogen bonds among them and no signs of structural disorder. This 0D-material is stable in air and dissolves in water and dimethylformamide. Raman spectroscopy shows characteristic vibrational modes for the organic and inorganic moieties over the frequency range of 5–3200 cm−1. UV-Vis spectroscopy reveals a large band gap of 5.1 eV and a broadband luminescence with emission maximum at 465 nm in the solid state. The luminescent properties of (Me3S)2ZrCl6 are discussed and compared with those of similar inorganic or metal-organic compounds.</p
Recommended from our members
Fabrication and evaluation of a skutterudite-based thermoelectric module for high-temperature applications
We report a straightforward methodology for the fabrication of high-temperature thermoelectric (TE) modules using commercially available solder alloys and metal barriers. This methodology employs standard and accessible facilities that are simple to implement in any laboratory. A TE module formed by nine n-type Yb x Co4Sb12 and p-type Ce x Fe3CoSb12 state-of-the-art skutterudite material couples was fabricated. The physical properties of the synthesized skutterudites were determined, and the module power output, internal resistance, and thermocycling stability were evaluated in air. At a temperature difference of 365 K, the module provides more than 1.5 W cm−3 volume power density. However, thermocycling showed an increase of the internal module resistance and degradation in performance with the number of cycles when the device is operated at a hot-side temperature higher than 573 K. This may be attributed to oxidation of the skutterudite thermoelements