Complex Stapes Motions in Human Ears

It has been reported that the physiological motion of the stapes in human and several animals in response to acoustic stimulation is mainly piston-like at low frequencies. At higher frequencies, the pattern includes rocking motions around the long and short axes of the footplate in human and animal ears. Measurements of such extended stapes motions are highly sensitive to the exact angulation of the stapes in relation to the measurement devices and to measurement errors. In this study, velocity in a specific direction was measured at multiple points on the footplates of human temporal bones using a Scanning Laser Doppler Vibrometer (SLDV) system, and the elementary components of the stapes motions, which were the piston-like motion and the rocking motions about the short and long axes of the footplate, were calculated from the measurements. The angular position of a laser beam with respect to the stapes and coordinates of the measurement points on the footplate plane were calculated by correlation between the SLDV measurement frame and the footplate-fixed frame, which was obtained from micro-CT images. The ratios of the rocking motions relative to the piston-like motion increased with frequency and reached a maximum around 7kHz. A novel method for quantitatively assessing measurements of complex stapes motions and error boundaries of the motion components is presented. In the frequency range of 0.5 to 8kHz, the magnitudes of the piston-like and two rocking motions were larger than estimated values of the corresponding upper error bound

Micro shift valve with media separation

Im IGF-Vorhaben 341 ZN "Miniaturisiertes Schaltventil mit Medientrennung" wurde von HSG-IMAT und dem ITM der Universität Stuttgart ein neuartiges Konzept für ein Schaltventil eingehend untersucht, bei dem die zum Umschalten der Ventilkugel benötigte Energie mit einem Stoßantrieb aufgebracht wird. Durch die Abbildung des Stoßantriebs des Ventils mittels Simulation einerseits und durch die Durchführung zahlreicher Experimente an Testaufbauten und Demonstratoren andererseits wurde ein sehr gutes Verständnis für den Ventilaufbau und die Einflussgrößen auf das Schaltverhalten des Ventils gewonnen

The influence of a cochlear implant electrode on the mechanical function of the inner ear

With the use of standard electrodes in cochlear implantation, residual acoustic hearing is markedly reduced or even lost. Possible reasons for this loss are direct implantation trauma to the inner ear, reaction of the cochlea triggered by the implantation, and change of cochlear mechanics due to the electrode

A method to measure sound transmission via the malleus-incus complex

BACKGROUND: The malleus-incus complex (MIC) plays a crucial role in the hearing process as it transforms and transmits acoustically-induced motion of the tympanic membrane, through the stapes, into the inner-ear. However, the transfer function of the MIC under physiologically-relevant acoustic stimulation is still under debate, especially due to insufficient quantitative data of the vibrational behavior of the MIC. This study focuses on the investigation of the sound transformation through the MIC, based on measurements of three-dimensional motions of the malleus and incus with a full six degrees of freedom (6 DOF). METHODS: The motion of the MIC was measured in two cadaveric human temporal bones with intact middle-ear structures excited via a loudspeaker embedded in an artificial ear canal, in the frequency range of 0.5-5 kHz. Three-dimensional (3D) shapes of the middle-ear ossicles were obtained by sequent micro-CT imaging, and an intrinsic frame based on the middle-ear anatomy was defined. All data were registered into the intrinsic frame, and rigid body motions of the malleus and incus were calculated with full six degrees of freedom. Then, the transfer function of the MIC, defined as velocity of the incus lenticular process relative to velocity of the malleus umbo, was obtained and analyzed. RESULTS: Based on the transfer function of the MIC, the motion of the lenticularis relative to the umbo reduces with frequency, particularly in the 2-5 kHz range. Analysis of the individual motion components of the transfer function indicates a predominant medial-lateral component at frequencies below 1 kHz, with low but considerable anterior-posterior and superior-inferior components that become prominent in the 2-5 kHz range. CONCLUSION: The transfer function of the human MIC, based on motion of the umbo and lenticularis, has been visualized and analyzed. While the magnitude of the transfer function decreases with frequency, its spatio-temporal complexity increases significantly

Complex Stapes Motions in Human Ears

It has been reported that the physiological motion of the stapes in human and several animals in response to acoustic stimulation is mainly piston-like at low frequencies. At higher frequencies, the pattern includes rocking motions around the long and short axes of the footplate in human and animal ears. Measurements of such extended stapes motions are highly sensitive to the exact angulation of the stapes in relation to the measurement devices and to measurement errors. In this study, velocity in a specific direction was measured at multiple points on the footplates of human temporal bones using a Scanning Laser Doppler Vibrometer (SLDV) system, and the elementary components of the stapes motions, which were the piston-like motion and the rocking motions about the short and long axes of the footplate, were calculated from the measurements. The angular position of a laser beam with respect to the stapes and coordinates of the measurement points on the footplate plane were calculated by correlation between the SLDV measurement frame and the footplate-fixed frame, which was obtained from micro-CT images. The ratios of the rocking motions relative to the piston-like motion increased with frequency and reached a maximum around 7 kHz