Optimization of accurate estimation of single diode solar photovoltaic parameters and extraction of maximum power point under different conditions

Introduction. With the snowballing requirement of renewable resources of energy, solar energy has been an area of key concern to the increasing demand for electricity. Solar photovoltaic has gotten a considerable amount of consideration from researchers in recent years. Purpose. For generating nearly realistic curves for the solar cell model it is needed to estimate unknown parameters with utmost precision. The five unknown parameters include diode-ideality factor, shunt-resistance, photon-current, diode dark saturation current, and series-resistance. Novelty. The proposed research method hybridizes flower pollination algorithm with least square method to better estimate the unknown parameters, and produce more realistic curves. Methodology. The proposed method shows many promising results that are more realistic in nature, as compared to other methods. Shunt-resistance and series-resistance are considered and diode constant is not neglected in this approach that previously has been in practice. The values of series-resistance and diode-ideality factor are found using flower pollination algorithm while shunt-resistance, diode dark saturation current and photon-current are found through least square method. Results. The combination of these techniques has achieved better results compared to other techniques. The simulation studies are carried on MATLAB/Simulink.Вступ. З огляду на величезну потребу у відновлюваних енергетичних ресурсах, сонячна енергія стала ключовою сферою розв’язання проблеми зростання попиту на електроенергію. За останні роки сонячна фотоелектрична техніка отримала значну увагу з боку дослідників. Мета. Для створення майже реалістичних кривих для моделі сонячних батарей необхідно оцінити невідомі параметри з максимальною точністю. П'ять невідомих параметрів включають коефіцієнт ідеальності діодів, опір шунту, фотонний струм, струм темного насичення діодів і послідовний опір. Новизна. Запропонований метод дослідження поєднує алгоритм запилення квітів із методом найменших квадратів для кращої оцінки невідомих параметрів та отримання більш реалістичних кривих. Методологія. Запропонований метод демонструє багато перспективних результатів, які є більш реалістичними за своєю природою, порівняно з іншими методами. Розглянуто опір шунта і послідовний опір, і в цьому підході, який раніше застосовувався на практиці, не нехтують постійною діода. Значення послідовного опору та коефіцієнта ідеальності діодів визначаються за допомогою алгоритму запилення квіток, тоді як опір шунту, струм темного насичення діодів і фотонний струм - методом найменших квадратів. Результати. Поєднання цих методів забезпечило кращі результати у порівнянні з іншими методами. Моделювання проводиться на MATLAB/Simulink

Physiologie appliquee, nutrition et metabolisme

This study examined whether expectancy of ergogenicity of a commonly used nutritional supplement (sodium bicarbonate; NaHCO3) influenced subsequent high-intensity cycling capacity. Eight recreationally active males (age, 21 ± 1 years; body mass, 75 ± 8 kg; height, 178 ± 4 cm; WPEAK = 205 ± 22 W) performed a graded incremental test to assess peak power output (WPEAK), one familiarisation trial and two experimental trials. Experimental trials consisted of cycling at 100% WPEAK to volitional exhaustion (TLIM) 60 min after ingesting either a placebo (PLA: 0.1 g·kg(-1) sodium chloride (NaCl), 4 mL·kg(-1) tap water, and 1 mL·kg(-1) squash) or a sham placebo (SHAM: 0.1 g·kg(-1) NaCl, 4 mL·kg(-1) carbonated water, and 1 mL·kg(-1) squash). SHAM aimed to replicate the previously reported symptoms of gut fullness (GF) and abdominal discomfort (AD) associated with NaHCO3 ingestion. Treatments were administered double blind and accompanied by written scripts designed to remain neutral (PLA) or induce expectancy of ergogenicity (SHAM). After SHAM mean TLIM increased by 9.5% compared to PLA (461 ± 148 s versus 421 ± 150 s; P = 0.048, d = 0.3). Ratings of GF and AD were mild but ~1 unit higher post-ingestion for SHAM. After 3 min TLIM overall ratings of perceived exertion were 1.4 ± 1.3 units lower for SHAM compared to PLA (P = 0.020, d = 0.6). There were no differences between treatments for blood lactate, blood glucose, or heart rate. In summary, ergogenicity after NaHCO3 ingestion may be influenced by expectancy, which mediates perception of effort during subsequent exercise. The observed ergogenicity with SHAM did not affect our measures of cardiorespiratory physiology or metabolic flux.University of Derby Departmental Teaching Budge

Electro-osmotic flow of couple stress fluids in a microchannel propagated by peristalsis

A mathematical model is developed for electro-osmotic peristaltic pumping of a non-Newtonian liquid in a deformable micro-channel. Stokes’ couple stress fluid model is deployed to represent realistic working liquids. The Poisson-Boltzmann equation for electric potential distribution is implemented owing to the presence of an electrical double layer (EDL) in the micro-channel. Using long wavelength, lubrication theory and Debye-Huckel approximations, the linearized transformed dimensionless boundary value problem is solved analytically. The influence of electro-osmotic parameter (inversely proportional to Debye length), maximum electro-osmotic velocity (a function of external applied electrical field) and couple stress parameter on axial velocity, volumetric flow rate, pressure gradient, local wall shear stress and stream function distributions is evaluated in detail with the aid of graphs. The Newtonian fluid case is retrieved as a special case with vanishing couple stress effects. With increasing couple stress parameter there is a significant elevation in axial pressure gradient whereas the core axial velocity is reduced. An increase in electro-osmotic parameter induces both flow acceleration in the core region (around the channel centreline) and also enhances axial pressure gradient substantially. The study is relevant to simulation of novel smart bio-inspired space pumps, chromatography and medical microscale devices

The DUNE far detector vertical drift technology. Technical design report

DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals

Highly-parallelized simulation of a pixelated LArTPC on a GPU

The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on 10^3 pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype

Convalescent plasma in patients admitted to hospital with COVID-19 (RECOVERY): a randomised controlled, open-label, platform trial

Background: Many patients with COVID-19 have been treated with plasma containing anti-SARS-CoV-2 antibodies. We aimed to evaluate the safety and efficacy of convalescent plasma therapy in patients admitted to hospital with COVID-19. Methods: This randomised, controlled, open-label, platform trial (Randomised Evaluation of COVID-19 Therapy [RECOVERY]) is assessing several possible treatments in patients hospitalised with COVID-19 in the UK. The trial is underway at 177 NHS hospitals from across the UK. Eligible and consenting patients were randomly assigned (1:1) to receive either usual care alone (usual care group) or usual care plus high-titre convalescent plasma (convalescent plasma group). The primary outcome was 28-day mortality, analysed on an intention-to-treat basis. The trial is registered with ISRCTN, 50189673, and ClinicalTrials.gov, NCT04381936. Findings: Between May 28, 2020, and Jan 15, 2021, 11558 (71%) of 16287 patients enrolled in RECOVERY were eligible to receive convalescent plasma and were assigned to either the convalescent plasma group or the usual care group. There was no significant difference in 28-day mortality between the two groups: 1399 (24%) of 5795 patients in the convalescent plasma group and 1408 (24%) of 5763 patients in the usual care group died within 28 days (rate ratio 1·00, 95% CI 0·93–1·07; p=0·95). The 28-day mortality rate ratio was similar in all prespecified subgroups of patients, including in those patients without detectable SARS-CoV-2 antibodies at randomisation. Allocation to convalescent plasma had no significant effect on the proportion of patients discharged from hospital within 28 days (3832 [66%] patients in the convalescent plasma group vs 3822 [66%] patients in the usual care group; rate ratio 0·99, 95% CI 0·94–1·03; p=0·57). Among those not on invasive mechanical ventilation at randomisation, there was no significant difference in the proportion of patients meeting the composite endpoint of progression to invasive mechanical ventilation or death (1568 [29%] of 5493 patients in the convalescent plasma group vs 1568 [29%] of 5448 patients in the usual care group; rate ratio 0·99, 95% CI 0·93–1·05; p=0·79). Interpretation: In patients hospitalised with COVID-19, high-titre convalescent plasma did not improve survival or other prespecified clinical outcomes. Funding: UK Research and Innovation (Medical Research Council) and National Institute of Health Research

Impact of zinc and manganese application to increase productivity of autumn planted maize (Zea mays L.)

Micronutrients play a significant role in various plant metabolic processes and are required in much smaller amount by the plants as compared to the macronutrients. An experiment was conducted during 2011, at the Agronomic research area, University of Agriculture, Faisalabad, Pakistan, to investigate the response of autumn planted maize to ZnSO4 and MnSO4 levels (10, 20 and 30 kg ha-1) and in combinations (5 kg ha-1 ZnSO4 + 5 kg ha-1 MnSO4, 10 kg ha-1 ZnSO4 + 10 kg ha-1 MnSO4 and 15 kg ha-1 ZnSO4 + 15 kg ha-1 MnSO4). The randomized complete block design (RCBD) having three replicates was used with plot size of 3 m x 6 m. The crop was planted on ridges 75 cm apart with recommended plant to plant distance of 25 cm. Maximum values for plant height at maturity (225 cm), cob diameter (4.29 cm), number of grains per cob (415), biological yield (20.15 tons ha-1), grain yield (7.42 tons ha-1) and seed protein content (8.96%) were recorded where 15 kg ha-1 ZnSO4 + 15 kg ha-1 MnSO4 was applied

Molecular detection and prevalence of Rotavirus with acute gastroenteritis among the children of rural and urban areas

Rotavirus is the main infective agent of acute gastroenteritis (AGE) in children under the age of five years and causing significant morbidity as well as mortality throughout the world. The study was carried out to detect the prevalence rate, genotypes strain and risk factors of Rotavirus among the children of rural and urban areas of district Bannu Khyber Pakhtunkhwa Pakistan. A total of 180 stool samples were collected from children under the age of 5 years from two major hospitals of Bannu from January to December (2015). The samples were analyzed by Reverse-transcriptase Polymerase Chain Reaction (RT-PCR) for the detection of Rotavirus, positive samples were further processed for genotyping (G and P type) through specific PCR. Of the total, 41 (23%) samples were positive for Rotavirus. The most prevalent G genotypes found were: G3, G8, G9 (each 29%), followed by G10 (15%), and G11 (10%). Whereas the prevalent P genotypes were: P-8 (25%), P-4 and P-10 (each 20%), P-9 (15%), followed by P-6 and P-11 (each 10%). Moreover, Rotavirus infection was more prevalent in summer (23.73%) and winter (22.7%) than spring (20%) and autumn (21.4%). Rotavirus infection exhibited high frequency in June (14%), October (8%) and November (6%). It is concluded that Rotavirus is more prevalent in children and various genotypes (G and P) of Rotavirus are present in the study area. Lack of studies, awareness and rarer testing of Rotavirus are the principal reasons of virus prevalence in district Bannu, Pakistan

Overexpression of heat shock protein 27 reduces cortical damage after cerebral ischemia

Heat shock protein 27 (HSP27) has a major role in mediating survival responses to a range of central nervous system insults, functioning as a protein chaperone, an antioxidant, and through inhibition of cell death pathways. We have used transgenic mice overexpressing HSP27 (HSP27tg) to examine the role of HSP27 in cerebral ischemia, using model of permanent middle cerebral artery occlusion (MCAO). Infarct size was evaluated using multislice T-2-weighted anatomical magnetic resonance imaging (MRI) after 24 h. A significant reduction of 30% in infarct size was detected in HSP27tg animals compared with wild-type (WT) littermates. To gain some insight into the mechanisms contributing to cell death and its attenuation by HSP27, we monitored the effect of induction of c-jun and ATF3 on tissue survival in MCAO and their effects on the expression of endogenous mouse HSP25 and HSP70. It is important that, the c-jun induction seen at 4 h tended to be localized to regions that were salvageable in HSP27tg mice but became infarcted in WT animals. Our results provide support for the powerful neuroprotective effects of HSP27 in cerebral ischemia. Journal of Cerebral Blood Flow & Metabolism (2010) 30, 849-856; doi:10.1038/jcbfm.2009.249; published online 9 December 2009Stem cells & developmental biolog