45 research outputs found

    Thermally exfoliated graphite oxide

    Get PDF
    A modified graphite oxide material contains a thermally exfoliated graphite oxide with a surface area of from about 300 sq m/g to 2600 sq m/g, wherein the thermally exfoliated graphite oxide displays no signature of the original graphite and/or graphite oxide, as determined by X-ray diffraction

    Wire coating containing thermally exfoliated graphite oxide

    Get PDF
    A wire coating containing a modified graphite oxide material, which is a thermally exfoliated graphite oxide with a surface area of from about 300 sq m/g to 2600 sq m.sup.2/g

    Automotive body panel containing thermally exfoliated graphite oxide

    Get PDF
    An automotive body panel containing a polymer composite formed of at least one polymer and a modified graphite oxide material, which is a thermally exfoliated graphite oxide with a surface area of from about 300 m.sup.2/g to 2600 m.sup.2/g

    Azimuthal Anisotropy beneath North Central Africa from Shear Wave Splitting Analyses

    Get PDF
    This study represents the first multistation investigation of azimuthal anisotropy beneath the interior of north central Africa, including Libya and adjacent regions, using shear wave splitting (SWS) analysis. Data used in the study include recently available broadband seismic data obtained from 15 stations managed by the Libyan Center for Remote Sensing and Space Science, and those from five other stations at which data are publicly accessible. A total of 583 pairs of high-quality SWS measurements utilizing the PKS, SKKS, and SKS phases demonstrate primarily N-S fast orientations with an average splitting delay time of approximately 1.2 s. An absence of periodic azimuthal variation of the observed splitting parameters indicates the presence of simple anisotropy, and lack of correlation between surficial features and the splitting parameters suggests that the origin of the observed anisotropy is primarily asthenospheric. This conclusion is enhanced by nonperiodic azimuthal variation of the splitting parameters observed at one of the stations located near the boundary of areas with different anisotropic properties. We interpret the observed anisotropy to be the consequence of northward movement of the African plate relative to the asthenosphere toward the Hellenic and Calabrian subduction zones. Local variance in fast orientations may be attributable to flow deflection by the northern edge of the African continental root. The observations provide critical and previously lacking constraints on mantle dynamic models in the vicinity of the convergent boundary between the African and Eurasian plates

    Enhancing Oil Removal from Water using Ferric Oxide Nanoparticles Doped Carbon Nanotubes Adsorbents

    Get PDF
    Oil contaminated water is one of the challenges in water resources management. It is crucial to remove the oil droplets from water in order to meet the discharge regulations set by the environmental authorities. Carbon nanotubes (CNTs) have generated a lot of attention as a new type of adsorbent due to their exceptionally high adsorption capacity for oil–water separation. The high hydrophobicity of CNTs makes them good candidates to enhance the de-oiling process from wastewater. In this study, we have reported the synthesis and evaluation of novel iron-oxide/CNTs nanocomposites for oil–water separation. The CNTs were doped with different loadings of iron oxide nanoparticles using a wet impregnation technique. The synthesized nanocomposite nanomaterials were characterized using field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (TEM), Brunauer, Emmett and Teller (BET) technique, X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The effect of adsorption parameters, including, adsorbent dosage, contact time, and agitation speed on the oil removal efficiency were optimized using batch experiments. The sorption capacities of doped CNTs were found to be greater than 7 g/g for gasoline oil. The doped CNTs reached maximum sorption capacity after only 15 min providing one of the fastest minimum contact times reported of all oil sorbent materials. The loading of Fe2O3 nanoparticles on the negative surface of CNT decreases the negative sign and magnitude of the zeta potential by overcoming the repulsive effects of the electrical double layers to allow the finely sized oil droplets to form larger droplets through coalescence. Therefore increasing percentage of the Fe2O3 on the surface of CNT increased the removal of the emulsified oil from the water

    Thermally conductive polyethylene/expanded graphite composites as heat transfer surface: Mechanical, thermo-physical and surface behavior

    Get PDF
    Composites of high-density polyethylene (HDPE) and expanded graphite (EG) are prepared for heat exchangers in multi-effect distillation (MED) desalination. At 50 wt.% EG loading, the thermal conductivity of HDPE was increased by 372%. Moreover, the surface wettability of the HDPE/EG composite was enhanced by corona and RF plasma treatment as demonstrated by the increase in surface free energy from 28.5 mJ/m2 for untreated HDPE/EG to 55.5 and 54.5 mJ/m2 for HDPE/EG treated by corona and RF plasma, respectively. This enhanced surface wettability was retained over a long time with only a 9% and 18% decrease in RF and corona plasma-treated samples’ surface energy after two months. The viscoelastic moduli and the complex viscosity profiles indicated that EG content dictates the optimum processing technique. At loading below 30 wt.%, the extrusion process is preferred, while above 30 wt.% loading, injection molding is preferred. The plasma treatment also improved the HDPE/EG composite overall heat transfer coefficient with an overall heat transfer coefficient of the composite reaching about 98% that of stainless steel. Moreover, the plasma-treated composite exhibited superior resistance to crystallization fouling in both CaSO4 solution and artificial seawater compared to untreated composites and stainless-steel surfaces. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.Qatar National Research Fund (A Member of the Qatar Foundation) [NPRP10-0205-170349

    Carotid body dysregulation contributes to Long COVID symptoms

    Get PDF
    Patients with long COVID suffer from breathlessness during exercise, leading to exercise intolerance. We know that SARSCoV-2, the virus that causes COVID-19, can infect carotid bodies which is a small sensory organ that sends signals to the brain for regulating breathing and blood pressure. This is called the carotid chemoreflex. However, itis not clear if SARS-CoV-2 infection affects carotid chemoreflex. Here, we examine whether the normal functioning of carotid chemoreflex is disrupted in non-hospitalised patients with long COVID and if this is linked to excessive breathing during exercise. Our study shows that carotid chemoreflex is more sensitive in long COVID patients, who areotherwise healthy. The carotid bodies could be a good therapeutic target for treating breathlessness in patients with long COVID

    Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

    Get PDF
    Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat
    corecore