11 research outputs found
Vehicle Based Laser Range Finding in Crops
Laser rangefinders and laser scanners are widely used for industrial purposes and for remote sensing. In agriculture information about crop parameters like volume, height, and density can support the optimisation of production processes. In scientific papers the measurement of these parameters by low cost laser rangefinders with one echo has been presented for short ranges. Because the cross section area of the beam increases with the measuring range, it can be expected that laser rangefinders will have a reduced measuring accuracy in small sized crops and when measuring far distances. These problems are caused by target areas smaller than the beam and by the beam striking the edges of crop objects. Lab tests under defined conditions and a real field test were performed to assess the measuring properties under such difficult conditions of a chosen low cost sensor. Based on lab tests it was shown that the accuracy was reduced, but the successful use of the sensor under field conditions demonstrated the potential to meet the demands for agricultural applications, Insights resulting from investigations made in the paper contribute to facilitating the choice or the development of laser rangefinder sensors for vehicle based measurement of crop parameters for optimisation of production processes
Precision neutron flux measurement using the Alpha-Gamma device
The Alpha-Gamma device at the National Institute of Standards and Technology (NIST) utilizes neutron capture on a totally absorbing 10B deposit to measure the absolute neutron flux of a monochromatic cold neutron beam. Gammas produced by the boron capture are counted using high purity germanium detectors, which are calibrated using a well-measured 239Pu alpha source and the alpha-to-gamma ratio from neutron capture on a thin 10B target. This device has been successfully operated and used to calibrate the neutron flux monitor for the BL2 neutron lifetime experiment at NIST. It is also being used for a measurement of the 6Li(n,t)4He cross section. We shall present its principle of operation along with the current and planned projects involving the Alpha-Gamma device, including the recalibration of the U.S. national neutron standard NBS-1 and (n,f) cross section measurements of 235U
Precision neutron flux measurement using the Alpha-Gamma device
The Alpha-Gamma device at the National Institute of Standards and Technology (NIST) utilizes neutron capture on a totally absorbing 10B deposit to measure the absolute neutron flux of a monochromatic cold neutron beam. Gammas produced by the boron capture are counted using high purity germanium detectors, which are calibrated using a well-measured 239Pu alpha source and the alpha-to-gamma ratio from neutron capture on a thin 10B target. This device has been successfully operated and used to calibrate the neutron flux monitor for the BL2 neutron lifetime experiment at NIST. It is also being used for a measurement of the 6Li(n,t)4He cross section. We shall present its principle of operation along with the current and planned projects involving the Alpha-Gamma device, including the recalibration of the U.S. national neutron standard NBS-1 and (n,f) cross section measurements of 235U
Innovative Lehr- und Lernkonzepte an der Hochschule Osnabrück – Einblick in ausgewählte Innovation-plus-Projekte der Förderrunden I und II
In der Schriftenreihe „Voneinander Lehren lernen“ publiziert das LearningCenter der Hochschule Osnabrück anwendungsbezogene Beiträge zur Qualitätsentwicklung in Studium und Lehre. Die Schriftenreihe ist an das Konzept des „Scholarship of Teaching and Learning“ (SoTL) angelehnt. Demnach soll sie insbesondere den Fachlehrenden verschiedener Studiengänge als Plattform dienen, um ihre eigenen Erfahrungen, Ideen und Konzepte zur Lehr- und Studiengangentwicklung systematisch zu reflektieren und entsprechende Erkenntnisse für andere nutzbar zu machen. Ziel ist es, den Diskurs über hochschuldidaktische Themen in die Fächer zu tragen und so die Qualität der Lehr-Lernprozesse in den Studiengängen zu fördern. In diesem vierten Band der Schriftenreihe werden Projekte der Hochschule Osnabrück beschrieben, die im Rahmen des Programms „Innovative Lehr- und Lernkonzepte: Innovation plus“ des Landes Niedersachsen gefördert wurden. Der Fokus liegt dabei auf abgeschlossenen Projekten der ersten beiden Ausschreibungsrunden. Gemeinsam ist den vorgestellten Initiativen, dass sie nicht nur das fachbezogene Lernen unterstützen, sondern auch zur Förderung überfachlicher Kompetenzen im Rahmen curricularer Lehre beitragen. Ergänzt werden die Texte der Fachlehrenden daher durch einen Aufsatz, in dem Mitarbeitende des LearningCenters diesen integrativen Ansatz und alternative Herangehensweisen zur Förderung überfachlicher Kompetenzen diskutieren
Beyond ΛCDM: Problems, solutions, and the road ahead
Despite its continued observational successes, there is a persistent (and growing) interest in extending cosmology beyond the standard model, ΛCDM. This is motivated by a range of apparently serious theoretical issues, involving such questions as the cosmological constant problem, the particle nature of dark matter, the validity of general relativity on large scales, the existence of anomalies in the CMB and on small scales, and the predictivity and testability of the inflationary paradigm. In this paper, we summarize the current status of ΛCDM as a physical theory, and review investigations into possible alternatives along a number of different lines, with a particular focus on highlighting the most promising directions. While the fundamental problems are proving reluctant to yield, the study of alternative cosmologies has led to considerable progress, with much more to come if hopes about forthcoming high-precision observations and new theoretical ideas are fulfilled
Polymorphisms in the lectin pathway of complement activation influence the incidence of acute rejection and graft outcome after kidney transplantation
Real-time-capable prediction of temperature and density profiles in a tokamak using RAPTOR and a first-principle-based transport model
The RAPTOR code is a control-oriented core plasma profile simulator with various applications in control design and verification, discharge optimization and real-time plasma simulation. To date, RAPTOR was capable of simulating the evolution of poloidal flux and electron temperature using empirical transport models, and required the user to input assumptions on the other profiles and plasma parameters. We present an extension of the code to simulate the temperature evolution of both ions and electrons, as well as the particle density transport. A proof-of-principle neural-network emulation of the quasilinear gyrokinetic QuaLiKiz transport model is coupled to RAPTOR for the calculation of first-principle-based heat and particle turbulent transport. These extended capabilities are demonstrated in a simulation of a JET discharge. The multi-channel simulation requires ∼0.2 s to simulate 1 second of a JET plasma, corresponding to ∼20 energy confinement times, while predicting experimental profiles within the limits of the transport model. The transport model requires no external inputs except for the boundary condition at the top of the H-mode pedestal. This marks the first time that simultaneous, accurate predictions of Te, Tiand nehave been obtained using a first-principle-based transport code that can run in faster-than-real-time for present-day tokamaks
Runaway electron beam control
Post-disruption runaway electron (RE) beams in tokamaks with large current can cause deep melting of the vessel and are one of the major concerns for ITER operations. Consequently, a considerable effort is provided by the scientific community in order to test RE mitigation strategies. We present an overview of the results obtained at FTU and TCV controlling the current and position of RE beams to improve safety and repeatability of mitigation studies such as massive gas (MGI) and shattered pellet injections (SPI). We show that the proposed RE beam controller (REB-C) implemented at FTU and TCV is effective and that current reduction of the beam can be performed via the central solenoid reducing the energy of REs, providing an alternative/parallel mitigation strategy to MGI/SPI. Experimental results show that, meanwhile deuterium pellets injected on a fully formed RE beam are ablated but do not improve RE energy dissipation rate, heavy metals injected by a laser blow off system on low-density flat-top discharges with a high level of RE seeding seem to induce disruptions expelling REs. Instabilities during the RE beam plateau phase have shown to enhance losses of REs, expelled from the beam core. Then, with the aim of triggering instabilities to increase RE losses, an oscillating loop voltage has been tested on RE beam plateau phase at TCV revealing, for the first time, what seems to be a full conversion from runaway to ohmic current. We finally report progresses in the design of control strategies at JET in view of the incoming SPI mitigation experiments