1,468 research outputs found
Analysis of organogenic competence of cotyledons of Jatropha curcas and their in vitro histological behavior
Using cut pieces cotyledons from germinating zygotic embryos of Jatropha curcas, we monitored the series of anatomical events leading to the generation of shoot through organogenesis by histological analysis. 14 days old cotyledons that were pre-cultured in a half strength Murashige and Skoog (MS) media supplemented with 100 mg/L myoinositol and 10 mg/L thiamine HCl, were cultured in organogenic competence induction media (CIM) comprising of MS salts with 1.5 mg/L benzyl adenine (BA) and 0.05 mg/L indole-3-butyric acid (IBA) and incubated for the induction of organogenic competence. Following their sequential transfer to shoot induction media (containing MS + 1.5 mg/L BA, 0.05 mg/L IBA and 0.5 mg/L GA3); shoot elongation media (containing MS + 0.3 mg/L BA) and rooting media (containing half strength MS + IBA at different concentrations), we selected individual explants and subjected them to histological analysis in order to study the morphological changes occurring during organogenesis. Our findings show that to induce organogenesis using cut pieces of cotyledons, these tissues must be harvested at least by the 14th day following germination. Optimal organogenic competence was attained after 21 days incubation period in the dark where most of the explants showed evidence of protruding shoots surrounded by calli with various morphological features. Up to 53.91% of the total explants cultured in this study produced well defined shoots with each explant producing an average number of 1.5 shoots bearing two to eight leaves. We recorded the highest percentage of root formation, which stood at 27.50% when the shoots were cultured in a rooting media containing 0.3 mg/L IBA. Histological analysis of the different events occurring during the process of organogenesis suggest that the protuberances arising from parenchymatous cells and perhaps bundle sheath forming meristematic centres acquiring organogenic competence have a multicellular origin, indicating that the regeneration process takes place through direct organogenesis.Key words: Jatropha curcas, organogenesis, auxins, histological analysis
Biomass Ashes for Acid Mine Drainage Remediation
Acid mine drainage (AMD) is the largest environmental problem facing the world mining and processing industry because
it has low pH and can contain high concentrations of potential pollutants. Biomass ash (BA) can be considered as a potential
material for AMD treatment. The main goal of this work was to investigate potential use of Biomass ash of CPK-LA and
PK-LA types for AMD remediation. Four UK BAs from diferent fuels (i.e. straw, meat and bone meal, poultry litter), synthetic AMD, and raw AMDs (Belovo and Ursk) were used for the AMD treatment experiments. Batch experiments showed
that in 1 h the biomass ash from straw combustion can efectively neutralise the synthetic AMD and the Belovo AMD with
removal of potential pollutants at the liquid-to-solid ratio (L/S) of 100–250 and 10–50, respectively. The biomass ashes
from straw and poultry litter combustion can efectively remove pollutants from the Ursk AMD at L/S 100 and adjust pH.
The metal concentrations of those treated AMDs met receiving water quality standards. Potential pollutants precipitated as
carbonate/hydroxide/sulphate, co-precipitated with Fe oxyhydroxides and Ca phosphates, and appeared as new phases such
as Ca, Cu, Zn phosphates and Ca, Fe phosphates. This investigation is essential for development of appropriate, environmentally friendly and economically rational waste management
Irreversibility in cooling and heating processes in the magnetocaloric MnAs and alloys
Fundação de Amparo Ă Pesquisa do Estado de SĂŁo Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de NĂvel Superior (CAPES)Conselho Nacional de Desenvolvimento CientĂfico e TecnolĂłgico (CNPq)Irreversibility of adiabatic processes in the magnetocaloric MnAs and alloys is presented here. We used a differential scanning calorimeter to record the heat flux as a function of the temperature and applied field for MnAs (Mn,X)As, where X stands for Fe or Cu in 0.6% of doping. We extracted the latent heat and entropy in a cycle. In the cooling process, we observed that S(Mn)(c)>S(Fe)(c)>S(Cu)(c), and for the heating process, S(Fe)(h)approximate to S(Mn)(h)>S(Cu)(h). The difference in the entropy obtained between processes was found to be as high as 37%.9326Fundação de Amparo Ă Pesquisa do Estado de SĂŁo Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de NĂvel Superior (CAPES)Conselho Nacional de Desenvolvimento CientĂfico e TecnolĂłgico (CNPq)Fundação de Amparo Ă Pesquisa do Estado de SĂŁo Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de NĂvel Superior (CAPES)Conselho Nacional de Desenvolvimento CientĂfico e TecnolĂłgico (CNPq
Transmutations and spectral parameter power series in eigenvalue problems
We give an overview of recent developments in Sturm-Liouville theory
concerning operators of transmutation (transformation) and spectral parameter
power series (SPPS). The possibility to write down the dispersion
(characteristic) equations corresponding to a variety of spectral problems
related to Sturm-Liouville equations in an analytic form is an attractive
feature of the SPPS method. It is based on a computation of certain systems of
recursive integrals. Considered as families of functions these systems are
complete in the -space and result to be the images of the nonnegative
integer powers of the independent variable under the action of a corresponding
transmutation operator. This recently revealed property of the Delsarte
transmutations opens the way to apply the transmutation operator even when its
integral kernel is unknown and gives the possibility to obtain further
interesting properties concerning the Darboux transformed Schr\"{o}dinger
operators.
We introduce the systems of recursive integrals and the SPPS approach,
explain some of its applications to spectral problems with numerical
illustrations, give the definition and basic properties of transmutation
operators, introduce a parametrized family of transmutation operators, study
their mapping properties and construct the transmutation operators for Darboux
transformed Schr\"{o}dinger operators.Comment: 30 pages, 4 figures. arXiv admin note: text overlap with
arXiv:1111.444
Towards an intelligent wearable ankle robot for assistance to foot drop
A wearable ankle robot prototype for assistance to foot drop is presented in this work. This device is built with soft and hard materials and employs one inertial sensor. First, the ankle robot uses a high-level method, developed with a Bayesian formulation, for recognition of walking activities and gait periods. Second, a low-level method, with a proportional-integral-derivative controller (PID), controls the wearable device to operate in assistive and transparent modes. In an assistive mode, activated by the toe-off detection, the wearable device assists the human foot in dorsiflexion orientation to reduce the effect of foot drop abnormality. In a transparent mode, activated by the heel-contact detection, the robot device follows the movements performed by the human foot. The wearable prototype is validated with experiments, in simulation and real-time modes, for recognition of walking activity and control of assistive and transparent modes during walking. Experiments achieved 99.87% and 99.20% accuracies for recognition of walking activity and gait periods. Results also show the ability of the wearable robot to operate according to the gait period recognised during walking. Overall, this work offers a wearable robot prototype with the potential to assist the human foot during walking, which is important to allow subjects to recover their confidence and quality of life
Laser-induced etching of few-layer graphene synthesized by Rapid-Chemical Vapour Deposition on Cu thin films
The outstanding electrical and mechanical properties of graphene make it very
attractive for several applications, Nanoelectronics above all. However a
reproducible and non destructive way to produce high quality, large-scale area,
single layer graphene sheets is still lacking. Chemical Vapour Deposition of
graphene on Cu catalytic thin films represents a promising method to reach this
goal, because of the low temperatures (T < 900 Celsius degrees) involved during
the process and of the theoretically expected monolayer self-limiting growth.
On the contrary such self-limiting growth is not commonly observed in
experiments, thus making the development of techniques allowing for a better
control of graphene growth highly desirable. Here we report about the local
ablation effect, arising in Raman analysis, due to the heat transfer induced by
the laser incident beam onto the graphene sample.Comment: v1:9 pages, 8 figures, submitted to SpringerPlus; v2: 11 pages,
PDFLaTeX, 9 figures, revised peer-reviewed version resubmitted to
SpringerPlus; 1 figure added, figure 1 and 4 replaced,typos corrected,
"Results and discussion" section significantly extended to better explain
etching mechanism and features of Raman spectra, references adde
Diphenyl Urea Derivatives as Inhibitors of Transketolase: A Structure-Based Virtual Screening
Transketolase is an enzyme involved in a critical step of the non-oxidative branch of the pentose phosphate pathway whose inhibition could lead to new anticancer drugs. Here, we report new human transketolase inhibitors, based on the phenyl urea scaffold, found by applying structure-based virtual screening. These inhibitors are designed to cover a hot spot in the dimerization interface of the homodimer of the enzyme, providing for the first time compounds with a suggested novel binding mode not based on mimicking the thiamine pyrophosphate cofactor
A review exploring the overarching burden of Zika virus with emphasis on epidemiological case studies from Brazil
This paper explores the main factors for mosquito-borne transmission of the Zika virus by focusing on environmental, anthropogenic, and social risks. A literature review was conducted bringing together related information from this genre of research from peer-reviewed publications. It was observed that environmental conditions, especially precipitation, humidity, and temperature, played a role in the transmission. Furthermore, anthropogenic factors including sanitation, urbanization, and environmental pollution promote the transmission by affecting the mosquito density. In addition, socioeconomic factors such as poverty as well as social inequality and low-quality housing have also an impact since these are social factors that limit access to certain facilities or infrastructure which, in turn, promote transmission when absent (e.g., piped water and screened windows). Finally, the paper presents short-, mid-, and long-term preventative solutions together with future perspectives. This is the first review exploring the effects of anthropogenic aspects on Zika transmission with a special emphasis in Brazil
Stochastic Gravity: Theory and Applications
Whereas semiclassical gravity is based on the semiclassical Einstein equation
with sources given by the expectation value of the stress-energy tensor of
quantum fields, stochastic semiclassical gravity is based on the
Einstein-Langevin equation, which has in addition sources due to the noise
kernel.In the first part, we describe the fundamentals of this new theory via
two approaches: the axiomatic and the functional. In the second part, we
describe three applications of stochastic gravity theory. First, we consider
metric perturbations in a Minkowski spacetime: we compute the two-point
correlation functions for the linearized Einstein tensor and for the metric
perturbations. Second, we discuss structure formation from the stochastic
gravity viewpoint. Third, we discuss the backreaction of Hawking radiation in
the gravitational background of a quasi-static black hole.Comment: 75 pages, no figures, submitted to Living Reviews in Relativit
Comparative study on the use of specific and heterologous microsatellite primers in the stingless bees Melipona rufiventris and M. mondury (Hymenoptera, Apidae)
Due to their high degree of polymorphism, microsatellites are considered useful tools for studying population genetics. Nevertheless, studies of genetic diversity in stingless bees by means of these primers have revealed a low level of polymorphism, possibly the consequence of the heterologous primers used, since in most cases these were not specifically designed for the species under consideration. Herein we compared the number of polymorphic loci and alleles per locus, as well as observed heterozygosity in Melipona rufiventris and M. mondury populations, using specific and heterologous primers. The use of specific primers placed in evidence the greater frequency of polymorphic loci and alleles per locus, besides an expressive increase in observed heterozygosity in M. rufiventris and M. mondury, thereby reinforcing the idea that populational studies should be undertaken by preferably using species-specific microsatellite primers
- …