11 research outputs found

    Precision luminosity measurement in proton–proton collisions at √s=13TeV in 2015 and 2016 at CMS

    Get PDF
    The measurement of the luminosity recorded by the CMS detector installed at LHC interaction point 5, using proton–proton collisions at √s=13TeV in 2015 and 2016, is reported. The absolute luminosity scale is measured for individual bunch crossings using beam-separation scans (the van der Meer method), with a relative precision of 1.3 and 1.0% in 2015 and 2016, respectively. The dominant sources of uncertainty are related to residual differences between the measured beam positions and the ones provided by the operational settings of the LHC magnets, the factorizability of the proton bunch spatial density functions in the coordinates transverse to the beam direction, and the modeling of the effect of electromagnetic interactions among protons in the colliding bunches. When applying the van der Meer calibration to the entire run periods, the integrated luminosities when CMS was fully operational are 2.27 and 36.3 fb1^{-1} in 2015 and 2016, with a relative precision of 1.6 and 1.2%, respectively. These are among the most precise luminosity measurements at bunched-beam hadron colliders

    Fast Wire Scanner Calibration

    No full text
    The fast rotating wire scanners installed in the PS and the PS booster are used for the precise transversal profile measurements in horizontal and vertical planes. The scanners may show large position measurement errors if no special treatment is applied to the acquired data. The aim of the calibration is to obtain a correction algorithm for the systematic position measurement error due to mechanical and electronic offsets. A new calibration system has been developed and introduced at CERN for the scanners implementing position feedback control. The calibration method is based on a substitution of a particle beam by a laser one where the laser beam position is well known. According to the previous experience the following crucial requirements to the system have been taking into consideration: heavy and mechanically stable design of the calibration bench to reduce mechanical oscillations of scanner parts; automation of the calibration procedure to exclude human errors in data taking, storing and analysis; high precision of the laser positioning; minimization of the total amount of scans and calibration time for each scanner

    Hardware simulation kit for beam instrumentation

    No full text
    For beam instrumentation front-end software consolidation in the CERN-PS AB-BDI-SW section has launched a campaign in collaboration with the Joint Institute for Nuclear Research (JINR) in Dubna (Russia). This consolidation is to a large extent re-engineering of legacy front-end software of the running CERN-PS machine. This raises the following issues: standardization, simulation of non active timing events, simulation of non available hardware, and backward compatibility. This paper describes a beam instrumentation hardware simulation, which is used to develop, test and validate instrumentation software, which are disconnected from the real hardware and machine timings

    AB-BI-SW 2007/08 Newsletter

    No full text
    The purpose of this letter is to inform you of the AB-BI software developments done in 2007 and foreseen in 2008 on the LHC injectors and corresponding experimental areas

    New Fast Beam Conditions Monitoring (BCM1F) system for CMS

    No full text
    The CMS Beam Radiation Instrumentation and Luminosity (BRIL) project is composed of several systems providing the experiment protection from adverse beam conditions while also measuring the online luminosity and beam background. Although the readout bandwidth of the Fast Beam Conditions Monitoring system (BCM1F—one of the faster monitoring systems of the CMS BRIL), was sufficient for the initial LHC conditions, the foreseen enhancement of the beams parameters after the LHC Long Shutdown-1 (LS1) imposed the upgrade of the system. This paper presents the new BCM1F, which is designed to provide real-time fast diagnosis of beam conditions and instantaneous luminosity with readout able to resolve the 25 ns bunch structure

    The Pixel Luminosity Telescope: a detector for luminosity measurement at CMS using silicon pixel sensors

    No full text
    Abstract The Pixel Luminosity Telescope is a silicon pixel detector dedicated to luminosity measurement at the CMS experiment at the LHC. It is located approximately 1.75 m from the interaction point and arranged into 16 “telescopes”, with eight telescopes installed around the beam pipe at either end of the detector and each telescope composed of three individual silicon sensor planes. The per-bunch instantaneous luminosity is measured by counting events where all three planes in the telescope register a hit, using a special readout at the full LHC bunch-crossing rate of 40 MHz. The full pixel information is read out at a lower rate and can be used to determine calibrations, corrections, and systematic uncertainties for the online and offline measurements. This paper details the commissioning, operational history, and performance of the detector during Run 2 (2015–18) of the LHC, as well as preparations for Run 3, which will begin in 2022

    Precision luminosity measurement in proton-proton collisions at root S=13 TeV in 2015 and 2016 at CMS

    Get PDF
    The measurement of the luminosity recorded by the CMS detector installed at LHC interaction point 5, using proton-proton collisions at root S = 13 TeV in 2015 and 2016, is reported. The absolute luminosity scale is measured for individual bunch crossings using beam-separation scans (the van der Meer method), with a relative precision of 1.3 and 1.0% in 2015 and 2016, respectively. The dominant sources of uncertainty are related to residual differences between the measured beam positions and the ones provided by the operational settings of the LHC magnets, the factorizability of the proton bunch spatial density functions in the coordinates transverse to the beam direction, and the modeling of the effect of electromagnetic interactions among protons in the colliding bunches. When applying the van der Meer calibration to the entire run periods, the integrated luminosities when CMS was fully operational are 2.27 and 36.3 fb(-1) in 2015 and 2016, with a relative precision of 1.6 and 1.2%, respectively. These are among the most precise luminosity measurements at bunched-beam hadron colliders.Peer reviewe
    corecore