The Heptane Static Worst-Case Execution Time Estimation Tool

Estimation of worst-case execution times (WCETs) is required to validate the temporal behavior of hard real time systems. Heptane is an open-source software program that estimates upper bounds of execution times on MIPS and ARM v7 architectures, offered to the WCET estimation community to experiment new WCET estimation techniques. The software architecture of Heptane was designed to be as modular and extensible as possible to facilitate the integration of new approaches. This paper is devoted to a description of Heptane, and includes information on the analyses it implements, how to use it and extend it

An Overview of Approaches Towards the Timing Analysability of Parallel Architecture

In order to meet performance/low energy/integration requirements, parallel architectures (multithreaded cores and multi-cores) are more and more considered in the design of embedded systems running critical software. The objective is to run several applications concurrently. When applications have strict real-time constraints, two questions arise: a) how can the worst-case execution time (WCET) of each application be computed while concurrent applications might interfere? b)~how can the tasks be scheduled so that they are guarantee to meet their deadlines? The second question has received much attention for several years~cite{CFHS04,DaBu11}. Proposed schemes generally assume that the first question has been solved, and in addition that they do not impact the WCETs. In effect, the first question is far from been answered even if several approaches have been proposed in the literature. In this paper, we present an overview of these approaches from the point of view of static WCET analysis techniques

On the Determinism of Multi-core Processors

Hard real time systems are evolving in order to respond to the increasing demand in complex functionalities while taking advantage of newer hardware. Software development for safety critical systems has to comply with strict requirements that will facilitate the certification process. During this process, each part of the system is evaluated, requiring a certain level of assurance in order to provide confidence in the product. In particular there must be a level of confidence that the system behaves deterministically that may be based on functionality, resources and time. The success of system verification depends greatly on the capacity to determine its exact behavior. Nonetheless, hardware evolved in order to maximize the average computation power throughput with little to no regard to the deterministic aspect. Therefore modern architectural features of processors, like pipelines, cache memories and co-processors, make it hard to verify that all the needed properties are respected. The multi-core is furthermore difficult to analyze as the architecture employs mechanisms that compromise strong spatial and temporal partitioning when using shared resources without rigorous access control like shared caches or shared input/outputs. In this paper we identify and analyze the main sources of nondeterminism of the multi-cores with regard to the timing estimation. Precise determination of the worst case execution time is a challenging task even in single-core architectures. The problems are accentuated in the multi-core context mainly due to the resource sharing that can lead to highly complex interactions or to nondeterminism. Most of the units that generate behaviors that are hard to take into account can be deactivated, but it is not always easy to predict the impact on the performance. Nevertheless some of the features cannot be disabled (such as the out of order execution or some nondeterministic crossbar access policies) which leads to the invalidation of the respective platform for applications with high criticality level. We will address the problematic units, propose configuration or architecture guidelines and estimate their impact on the performance and determinism of the system

WCET-aware Software Based Cache Partitioning for Multi-Task Real-Time Systems

Caches are a source of unpredictability since it is very difficult to predict if a memory access results in a cache hit or miss. In systems running multiple tasks steered by a preempting scheduler, it is even impossible to determine the cache behavior since interrupt-driven schedulers lead to unknown points of time for context switches. Partitioned caches are already used in multi-task environments to increase the cache hit ratio by avoiding mutual eviction of tasks from the cache. For real-time systems, the upper bound of the execution time is one of the most important metrics, called the Worst-Case Execution Time (WCET). In this paper, we use partitioning of instruction caches as a technique to achieve tighter WCET estimations since tasks can not be evicted from their partition by other tasks. We propose a novel WCET-aware cache partitioning algorithm, which determines the optimal partition size for each task with focus on decreasing the system\u27s WCET for a given set of possible partition sizes. Employing this algorithm, we are able to decrease the WCET depending on the number of tasks in a set by up to 34%. On average, reductions between 12% and 19% can be achieved

Impact of DM-LRU on WCET: A Static Analysis Approach

Cache memories in modern embedded processors are known to improve average memory access performance. Unfortunately, they are also known to represent a major source of unpredictability for hard real-time workload. One of the main limitations of typical caches is that content selection and replacement is entirely performed in hardware. As such, it is hard to control the cache behavior in software to favor caching of blocks that are known to have an impact on an application\u27s worst-case execution time (WCET). In this paper, we consider a cache replacement policy, namely DM-LRU, that allows system designers to prioritize caching of memory blocks that are known to have an important impact on an application\u27s WCET. Considering a single-core, single-level cache hierarchy, we describe an abstract interpretation-based timing analysis for DM-LRU. We implement the proposed analysis in a self-contained toolkit and study its qualitative properties on a set of representative benchmarks. Apart from being useful to compute the WCET when DM-LRU or similar policies are used, the proposed analysis can allow designers to perform WCET impact-aware selection of content to be retained in cache

211009

Tasks running on microprocessors with cache memories are often subjected to cache related preemption delays (CRPDs). CRPDs may significantly increase task execution times, thereby, affecting their schedulability. Schedulability analysis accounting for the impact of CRPD has been extensively studied over the past two decades for systems with a single level of cache. Yet, the literature on CRPD for multilevel non-inclusive caches is relatively scarce. Two main challenges exist when analyzing multilevel caches: (1) characterization of the indirect effect of preemption, i.e., capturing the increase in cache interference at lower cache levels (e.g., L2 cache) due to the evictions of cache content from a higher cache level (e.g., L1 cache), and (2) upper bounding the maximum CRPD suffered by tasks at lower cache levels (e.g., L2 cache), i.e., determining the cache content of tasks that can be evicted from lower cache levels in case of preemptions. Existing analysis that focus on bounding CRPD for multilevel non-inclusive caches overestimate the values of (1) and (2) leading to pessimistic worst-case response time (WCRT) estimations. In this work, we reduce the excessive pessimism of the state-of-the-art CRPD analysis for multilevel non-inclusive caches by (i) introducing the notion of multi-level useful cache blocks, i.e., cache blocks that can cause CRPD at different cache levels, and use it to compute a tighter bound on the indirect effect of preemption of tasks; and (ii) deriving a new analysis to compute tighter bounds on the CRPD of tasks at lower cache levels (e.g., L2 cache). We performed a thorough experimental evaluation using benchmarks to compare the performance of our proposed CRPD analysis against the state-of-the-art CRPD analysis. Experimental results show that our proposed CRPD analysis dominates the existing analysis and improves task set schedulability by up to 20% percentage pointsThis work was partially supported by National Funds through FCT/MCTES (Portuguese Foundation for Science and Technology), within the CISTER Research Unit (UIDP/UIDB/04234/2020); also by the Operational Competitiveness Programme and Internationalization (COMPETE 2020) under the PT2020 Partnership Agreement, through the European Regional Development Fund (ERDF), and by national funds through the FCT, within project PREFECT (POCI-01-0145-FEDER-029119); also by the European Union’s Horizon 2020 - The EU Framework Programme for Research and Innovation 2014-2020, under grant agreement No. 732505. Project ”TEC4Growth - Pervasive Intelligence, Enhancers and Proofs of Concept with Industrial Impact/NORTE-01- 0145-FEDER000020” financed by the North Portugal Regional Operational Programme (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement.info:eu-repo/semantics/publishedVersio

Probabilistic Worst-Case Timing Analysis: Taxonomy and Comprehensive Survey

"© ACM, 2019. This is the author's version of the work. It is posted here by permission of ACM for your personal use. Not for redistribution. The definitive version was published in ACM Computing Surveys, {VOL 52, ISS 1, (February 2019)} https://dl.acm.org/doi/10.1145/3301283"[EN] The unabated increase in the complexity of the hardware and software components of modern embedded real-time systems has given momentum to a host of research in the use of probabilistic and statistical techniques for timing analysis. In the last few years, that front of investigation has yielded a body of scientific literature vast enough to warrant some comprehensive taxonomy of motivations, strategies of application, and directions of research. This survey addresses this very need, singling out the principal techniques in the state of the art of timing analysis that employ probabilistic reasoning at some level, building a taxonomy of them, discussing their relative merit and limitations, and the relations among them. In addition to offering a comprehensive foundation to savvy probabilistic timing analysis, this article also identifies the key challenges to be addressed to consolidate the scientific soundness and industrial viability of this emerging field.This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant TIN2015-65316-P, the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 772773), and the HiPEAC Network of Excellence. Jaume Abella was partially supported by the Ministry of Economy and Competitiveness under a Ramon y Cajal postdoctoral fellowship (RYC-2013-14717). Enrico Mezzetti has been partially supported by the Spanish Ministry of Economy and Competitiveness under Juan de la Cierva-Incorporación postdoctoral fellowship No. IJCI-2016-27396.Cazorla, FJ.; Kosmidis, L.; Mezzetti, E.; Hernández Luz, C.; Abella, J.; Vardanega, T. (2019). Probabilistic Worst-Case Timing Analysis: Taxonomy and Comprehensive Survey. ACM Computing Surveys. 52(1):1-35. https://doi.org/10.1145/3301283S13552

Exploring average-case and probabilistic worst-case performance of time randomised caches and their associated overheads

In this work we focus on the analysis of performance in the context of Probabilistic Timing Analysis (PTA) from different angles. First, we model and evaluate average performance of time-randomised caches used in the context of PTA. Second, we quantify the time overheads of applying some PTA method