Distributed synchronization algorithms for wireless sensor networks

The ability to distribute time and frequency among a large population of interacting agents is of interest for diverse disciplines, inasmuch as it enables to carry out complex cooperative tasks. In a wireless sensor network (WSN), time/frequency synchronization allows the implementation of distributed signal processing and coding techniques, and the realization of coordinated access to the shared wireless medium. Large multi-hop WSN\u27s constitute a new regime for network synchronization, as they call for the development of scalable, fully distributed synchronization algorithms. While most of previous research focused on synchronization at the application layer, this thesis considers synchronization at the lowest layers of the communication protocol stack of a WSN, namely the physical and the medium access control (MAC) layer. At the physical layer, the focus is on the compensation of carrier frequency offsets (CFO), while time synchronization is studied for application at the MAC layer. In both cases, the problem of realizing network-wide synchronization is approached by employing distributed clock control algorithms based on the classical concept of coupled phase and frequency locked loops (PLL and FLL). The analysis takes into account communication, signaling and energy consumption constraints arising in the novel context of multi-hop WSN\u27s. In particular, the robustness of the algorithms is checked against packet collision events, infrequent sync updates, and errors introduced by different noise sources, such as transmission delays and clock frequency instabilities. By observing that WSN\u27s allow for greater flexibility in the design of the synchronization network architecture, this work examines also the relative merits of both peer-to-peer (mutually coupled - MC) and hierarchical (master-slave - MS) architectures. With both MC and MS architectures, synchronization accuracy degrades smoothly with the network size, provided that loop parameters are conveniently chosen. In particular, MS topologies guarantee faster synchronization, but they are hindered by higher noise accumulation, while MC topologies allow for an almost uniform error distribution at the price of much slower convergence. For all the considered cases, synchronization algorithms based on adaptive PLL and FLL designs are shown to provide robust and scalable network-wide time and frequency distribution in a WSN

A FEEDBACK-BASED DYNAMIC INSTRUMENT FOR MEASURING THE MECHANICAL PROPERTIES OF SOFT TISSUES

In this paper, a novel feedback-based dynamic instrument integrated into a Minimally- Invasive-Surgery (MIS) tool to evaluate the mechanical impedance of soft tissues is presented. This instrument is capable of measuring viscoelasticity of tissues if specific boundary conditions are known. Some important advantages of the proposed instrument are that it is robust and simple in comparison to other similar instruments as it does not require magnitude information of plant’s displacement output and no force sensor is used. The precision and accuracy of the measurements of the proposed instrument for soft tissues is noticeably higher than similar instruments, which are not optimized to work with soft tissues. The proposed dynamic instrument is designed to detect the frequency shifts caused by contacting a soft tissue using an improved phase-locked loop feedback system (closed loop). These frequency shifts can then be used to evaluate the mechanical properties of the tissue. The closed-loop method works fast (with an approximate resonance-frequency-shift rate of 15 Hz per second), and is capable of measuring dy­ namic mechanical properties of viscoelastic tissues, while previous focus was mostly on static/quasi-static elastic modulus. The instrument is used to evaluate the equivalent stiffness of several springs and cantilever beams, mass of reference samples, and also the frequency shifts of several phantoms with injected tumors, noting that these frequency shifts can be used to measure the viscoelasticity of the tissues. It is also shown that the instrument can be used for tumor localization in these phantoms

Stability Analysis of Converter Control Strategies for Power Electronics-Dominated Power Systems

The electric power system, whose well-established structure consolidated over decades of studies is composed of large centralized generating units, transmission systems, and distributed loads, is currently experiencing a significant transformation, posing new challenges for its safe operation in the near future. The increasing amount of grid-connected power electronics-based converters associated with renewable energy sources, is reducing the amount of energy produced by means of conventional generating units, generally represented by large synchronous machines (SMs) directly connected to the grid. As a consequence, declining system inertia, as well as reduced fault currents affecting short-circuit level and retained voltage under fault conditions, are expected. This has caused concerns among system operators (SOs) worldwide about the stability of the future power system, triggering discussions in different countries about the need for new converter control strategies, which would allow safe system operation under the expected grid configuration. In this scenario, the concept of ”grid-forming (GFM) converters” has been recently proposed as a possible solution allowing high-penetration of power electronics-based generation. Initially introduced in the context of microgrids, the concept of GFM converters needs to be reviewed for applications in wide interconnected systems. Indeed, at the present time, a well-established formulation is still missing in the literature, and several committees worldwide are currently working on a definition for identifying the characteristics of such converters. Due to the initial concern of SOs related to declining system inertia, the concept of GFM converters has been often associated with the idea of virtual inertia, and namely the emulation of a synthetic inertial response by means of a power electronics-based converter. Yet, this is only one aspect related to the increase of power electronics-based generation, and the concept of a GFM converter includes other features, which, however, need to be properly specified in order to provide clear guidelines for manufacturers aiming to the development of suitable converter control strategies. This thesis addresses the topic of GFM converters from a control perspective, and aims to characterize potential features, as well as the relevant issues related to this technology. First, the characteristics of a GFM converter are identified according to an extensive literature overview, so that by reviewing international practice on this technology, a general formulation for a GFM converter control structure is identified. Particular emphasis is given to the synchronization principle adopted by the converter which, contrary to state-of-the-art grid-connected converters adopting a dedicated unit for grid synchronization purposes, is generally achieved in a GFM converter by reproducing the power-synchronization mechanism of a SM. An extensive small-signal stability analysis is performed in order to identify the implications of the identified converter behaviour on converter stability, as well as the effects due to the interactions between converters operating nearby. Finally, potential issues related to the implementation of a GFM converter are highlighted, and possible solutions are proposed, whose effectiveness is validated by means of hardware-in-the-loop (HIL) simulations, as well as experimental tests in a laboratory environment, by adopting power-HIL (PHIL) test benches

Control of Voltage-Source Converters Considering Virtual Inertia Dynamics

Controlling power-electronic converters in power systems has significantly gained more attention due to the rapid penetration of alternative energy sources. This growth in the depth of penetration also poses a threat to the frequency stability of modern power systems. Photovoltaic and wind power systems utilizing power-electronic converters without physical rotating masses, unlike traditional power generations, provide low inertia, resulting in frequency instability. Different research has developed the control aspects of power-electronic converters, offering many control strategies for different operation modes and enhancing the inertia of converter-based systems. The precise control algorithm that can improve the inertial response of converter-based systems in the power grid is called virtual inertia. This thesis employs a control methodology that mimics synchronous generators characteristics based on the swing equation of rotor dynamics to create virtual inertia. The models are also built under different cases, including grid-connected and islanded situations, using the swing equation with inner current and voltage outer loops. Analysis of the simulation results in MATLAB/Simulink demonstrates that active and reactive power are independently controlled under the grid-imposed mode, voltage and frequency are controlled under the islanded mode, and frequency stability of the system is enhanced by the virtual inertia emulation using swing equation. On this basis, it is recommended that the swing equation-based approach is incorporated with the current and voltage control loops to achieve better protection under over-current conditions. Further works are required to discover other factors that could improve the effectiveness of the models

Design and Control of Virtual Synchronous Machine Based Energy Systems

Conventionally, the operation and stability of power systems have been governed by the dynamics of large synchronous generators (SGs) which provide the inertial support required to maintain the resilience and stability of the power system. How-ever, the commitment of the UK to drive a zero-carbon economy is accelerating the integration of renewable energy sources (RESs) into the power system. Since the dynamics and operation of RESs differs from SGs, the large-scale integration of RESs will significantly impact the control and stability of the power system.This thesis focuses on the design of grid-friendly control algorithms termed virtual synchronous machines (VSMs), which mimic the desirable characteristics of SGs. Although several VSM topologies have been proposed in literature, most of them require further modifications before they can be integrated into the grid. Hence, a novel VSM algorithm for permanent magnet synchronous generator based wind turbines has been proposed in this thesis.The proposed VSM performs seamlessly in all operating modes and enables maxi-mum power point tracking in grid-connected operation (assuming strong grid), load following power generation in islanded mode and fault ride-through during faults. To ensure optimal performance of the VSM in all operating modes, a comprehensive stability analysis of the VSM was performed in the event of small and large per-turbations. The result of the analysis was used to establish design guidelines and operational limits of the VSM.This thesis further evaluates the impact of VSMs on the power systems low-frequency oscillations (LFOs). A detailed two-machine test-bed was developed to analyze the LFOs which exists when VSMs replace SGs. The characteristics of the LFO modes and the dominant states was comprehensively analyzed. The LFO modes which exists in an all-VSM grid was also analyzed. Further, the role of the power system stabilizers in an all-VSM grid was comprehensively evaluated. An IEEE benchmark two-area four-machine system was employed to validate the results of the small-signal analysis.The analysis and time-domain simulations in this thesis were performed in the MAT-LAB/SIMULINK environment

MATLAB

A well-known statement says that the PID controller is the "bread and butter" of the control engineer. This is indeed true, from a scientific standpoint. However, nowadays, in the era of computer science, when the paper and pencil have been replaced by the keyboard and the display of computers, one may equally say that MATLAB is the "bread" in the above statement. MATLAB has became a de facto tool for the modern system engineer. This book is written for both engineering students, as well as for practicing engineers. The wide range of applications in which MATLAB is the working framework, shows that it is a powerful, comprehensive and easy-to-use environment for performing technical computations. The book includes various excellent applications in which MATLAB is employed: from pure algebraic computations to data acquisition in real-life experiments, from control strategies to image processing algorithms, from graphical user interface design for educational purposes to Simulink embedded systems

Space programs summary no. 37-66, volume 3 for the period 1 October - 30 November 1970. Supporting research and advanced development

Research studies on development of Thermoelectric Outer Planet Spacecraft /TOPS/ and lunar exploratio

Power Electronics Applications in Renewable Energy Systems

The renewable generation system is currently experiencing rapid growth in various power grids. The stability and dynamic response issues of power grids are receiving attention due to the increase in power electronics-based renewable energy. The main focus of this Special Issue is to provide solutions for power system planning and operation. Power electronics-based devices can offer new ancillary services to several industrial sectors. In order to fully include the capability of power conversion systems in the network integration of renewable generators, several studies should be carried out, including detailed studies of switching circuits, and comprehensive operating strategies for numerous devices, consisting of large-scale renewable generation clusters