Experimental and simulation study of 1D silicon nanowire transistors using heavily doped channels

The experimental results from 8 nm diameter silicon nanowire junctionless field effect transistors with gate lengths of 150 nm are presented that demonstrate on-currents up to 1.15 mA/m for 1.0 V and 2.52 mA/m for 1.8 V gate overdrive with an off-current set at 100 nA/m. On- to off-current ratios above 108 with a subthreshold slope of 66 mV/dec are demonstrated at 25 oC. Simulations using drift-diffusion which include densitygradient quantum corrections provide excellent agreement with the experimental results. The simulations demonstrate that the present silicon-dioxide gate dielectric only allows the gate to be scaled to 25 nm length before short-channel effects significantly reduce the performance. If high-K dielectrics replace some parts of the silicon dioxide then the technology can be scaled to at least 10 nm gatelength

Statistical variability and reliability in nanoscale FinFETs

A comprehensive full-scale 3D simulation study of statistical variability and reliability in emerging, scaled FinFETs on SOI substrate with gate-lengths of 20nm, 14nm and 10nm and low channel doping is presented. Excellent electrostatic integrity and resulting tolerance to low channel doping are perceived as the main FinFET advantages, resulting in a dramatic reduction of statistical variability due to random discrete dopants (RDD). It is found that line edge roughness (LER), metal gate granularity (MGG) and interface trapped charges (ITC) dominate the parameter fluctuations with different distribution features, while RDD may result in relatively rare but significant changes in the device characteristics

3-D statistical simulation comparison of oxide reliability of planar MOSFETs and FinFET

New transistor architectures such as fully depleted silicon on insulator (FDSoI) MOSFETs and FinFETs have been introduced in advanced CMOS technology generations to boost performance and to reduce statistical variability (SV). In this paper, the robustness of these architectures to random telegraph noise and bias temperature instability issues is investigated using comprehensive 3-D numerical simulations, and results are compared with those obtained from conventional bulk MOSFETs. Not only the impact of static trapped charges is investigated, but also the charge trapping dynamics are studied to allow device lifetime and failure rate predictions. Our results show that device-to-device variability is barely increased by progressive oxide charge trapping in bulk devices. On the contrary, oxide degradation determines the SV of SoI and FinFET devices. However, the SoI and multigate transistor architectures are shown to be significantly more robust in terms of immunity to time-dependent SV when compared with the conventional bulk device. The comparative study here presented could be of significant importance for reliability resistant CMOS circuits and systems design. © 2013 IEEE.published_or_final_versio

PtSi Clustering In Silicon Probed by Transport Spectroscopy

Metal silicides formed by means of thermal annealing processes are employed as contact materials in microelectronics. Control of the structure of silicide/silicon interfaces becomes a critical issue when the device characteristic size is reduced below a few tens of nanometers. Here we report on silicide clustering occurring within the channel of PtSi/Si/PtSi Schottky barrier transistors. This phenomenon is investigated through atomistic simulations and low-temperature resonant tunneling spectroscopy. Our results provide evidence for the segregation of a PtSi cluster with a diameter of a few nanometers from the silicide contact. The cluster acts as metallic quantum dot giving rise to distinct signatures of quantum transport through its discrete energy states

Impact of randomly distributed dopants on Ω-gate junctionless silicon nanowire transistors

This paper presents experimental and simulation analysis of an Ω-shaped silicon junctionless nanowire field-effect transistor (JL-NWT) with gate lengths of 150 nm and diameter of the Si channel of 8 nm. Our experimental measurements reveal that the ON-currents up to 1.15 mA/μm for 1.0 V and 2.52 mA/μm for the 1.8-V gate overdrive with an OFF-current set at 100 nA/μm. Also, the experiment data reveal more than eight orders of magnitude ON-current to OFF-current ratios and an excellent subthreshold slope of 66 mV/dec recorded at room temperature. The obtained experimental current-voltage characteristics are used as a reference point to calibrate the simulations models used in this paper. Our simulation data show good agreement with the experimental results. All simulations are based on drift-diffusion formalism with activated density gradient quantum corrections. Once the simulations methodology is established, the simulations are calibrated to the experimental data. After this, we have performed statistical numerical experiments of a set of 500 different JL-NWTs. Each device has a unique random distribution of the discrete dopants within the silicon body. From those statistical simulations, we extracted important figures of merit, such as OFF-current and ON-current, subthreshold slope, and voltage threshold. The performed statistical analysis, on samples of those 500 JL-NWTs, shows that the mean ID-VGs characteristic is in excellent agreement with the experimental measurements. Moreover, the mean ID-VGs characteristic reproduces better the subthreshold slope data obtained from the experiment in comparison to the continuous model simulation. Finally, performance predictions for the JL transistor with shorter gate lengths and thinner oxide regions are carried out. Among the simulated JL transistors, the configuration with 25-nm gate length and 2-nm oxide thickness shows the most promising characteristics offering scalable designs

Back-gate bias dependence of the statistical variability of FDSOI MOSFETs with thin BOX

The impact of back-gate bias on the statistical variability (SV) of FDSOI MOSFETs with thin buried oxide (BOX) is studied via 3-D 'atomistic' drift-diffusion simulation. The impact of the principal sources of SV, i.e., random dopant fluctuations, line edge roughness, and metal gate granularity, on threshold voltage, drain-induced barrier lowering, and drive current is studied in detail. It is shown that reverse back-bias is beneficial in terms of reducing the dispersion of the off-current and the corresponding standby leakage power, whereas forward back-bias reduces the on-current variability. The correlation coefficients between relevant figures of merit and their trends against back-bias are also studied in detail, providing guidelines for the development of statistical compact models of thin-BOX FDSOI MOSFETs for low-standby-power circuit applications. © 1963-2012 IEEE.published_or_final_versio

Modeling and Simulation of Subthreshold Characteristics of Short-Channel Fully-Depleted Recessed-Source/Drain SOI MOSFETs

Non-conventional metal-oxide-semiconductor (MOS) devices have attracted researchers‟ attention for future ultra-large-scale-integration (ULSI) applications since the channel length of conventional MOS devices approached the physical limit. Among the non-conventional CMOS devices which are currently being pursued for the future ULSI, the fully-depleted (FD) SOI MOSFET is a serious contender as the SOI MOSFETs possess some unique features such as enhanced short-channel effects immunity, low substrate leakage current, and compatibility with the planar CMOS technology. However, due to the ultra-thin source and drain regions, FD SOI MOSFETs possess large series resistance which leads to the poor current drive capability of the device despite having excellent short-channel characteristics. To overcome this large series resistance problem, the source/drain area may be increased by extending S/D either upward or downward. Hence, elevated-source/drain (E-S/D) and recessed-source/drain (Re-S/D) are the two structures which can be used to minimize the series resistance problem. Due to the undesirable issues such as parasitic capacitance, current crowding effects, etc. with E-S/D structure, the Re-S/D structure is a better choice. The FD Re-S/D SOI MOSFET may be an attractive option for sub-45nm regime because of its low parasitic capacitances, reduced series resistance, high drive current, very high switching speed and compatibility with the planar CMOS technology. The present dissertation is to deal with the theoretical modeling and computer-based simulation of the FD SOI MOSFETs in general, and recessed source/drain (Re-S/D) ultra-thin-body (UTB) SOI MOSFETs in particular. The current drive capability of Re-S/D UTB SOI MOSFETs can be further improved by adopting the dual-metal-gate (DMG) structure in place of the conventional single-metal-gate-structure. However, it will be interesting to see how the presence of two metals as gate contact changes the subthreshold characteristics of the device. Hence, the effects of adopting DMG structure on the threshold voltage, subthreshold swing and leakage current of Re-S/D UTB SOI MOSFETs have been studied in this dissertation. Further, high-k dielectric materials are used in ultra-scaled MOS devices in order to cut down the quantum mechanical tunneling of carriers. However, a physically thick gate dielectric causes fringing field induced performance degradation. Therefore, the impact of high-k dielectric materials on subthreshold characteristics of Re-S/D SOI MOSFETs needs to be investigated. In this dissertation, various subthreshold characteristics of the device with high-k gate dielectric and metal gate electrode have been investigated in detail. Moreover, considering the variability problem of threshold voltage in ultra-scaled devices, the presence of a back-gate bias voltage may be useful for ultimate tuning of the threshold voltage and other characteristics. Hence, the impact of back-gate bias on the important subthreshold characteristics such as threshold voltage, subthreshold swing and leakage currents of Re-S/D UTB SOI MOSFETs has been thoroughly analyzed in this dissertation. The validity of the analytical models are verified by comparing model results with the numerical simulation results obtained from ATLAS™, a device simulator from SILVACO Inc

Development of the analog ASIC for multi-channel readout X-ray CCD camera

We report on the performance of an analog application-specific integrated circuit (ASIC) developed aiming for the front-end electronics of the X-ray CCDcamera system onboard the next X-ray astronomical satellite, ASTRO-H. It has four identical channels that simultaneously process the CCD signals. Distinctive capability of analog-to-digital conversion enables us to construct a CCD camera body that outputs only digital signals. As the result of the front-end electronics test, it works properly with low input noise of =<30 uV at the pixel rate below 100 kHz. The power consumption is sufficiently low of about 150 mW/chip. The input signal range of 720 mV covers the effective energy range of the typical X-ray photon counting CCD (up to 20 keV). The integrated non-linearity is 0.2% that is similar as those of the conventional CCDs in orbit. We also performed a radiation tolerance test against the total ionizing dose (TID) effect and the single event effect. The irradiation test using 60Co and proton beam showed that the ASIC has the sufficient tolerance against TID up to 200 krad, which absolutely exceeds the expected amount of dose during the period of operating in a low-inclination low-earth orbit. The irradiation of Fe ions with the fluence of 5.2x10^8 Ion/cm2 resulted in no single event latchup (SEL), although there were some possible single event upsets. The threshold against SEL is higher than 1.68 MeV cm^2/mg, which is sufficiently high enough that the SEL event should not be one of major causes of instrument downtime in orbit.Comment: 16 pages, 6 figure