Design of a multiple bloom filter for distributed navigation routing

Unmanned navigation of vehicles and mobile robots can be greatly simplified by providing environmental intelligence with dispersed wireless sensors. The wireless sensors can work as active landmarks for vehicle localization and routing. However, wireless sensors are often resource scarce and require a resource-saving design. In this paper, a multiple Bloom-filter scheme is proposed to compress a global routing table for a wireless sensor. It is used as a lookup table for routing a vehicle to any destination but requires significantly less memory space and search effort. An error-expectation-based design for a multiple Bloom filter is proposed as an improvement to the conventional false-positive-rate-based design. The new design is shown to provide an equal relative error expectation for all branched paths, which ensures a better network load balance and uses less memory space. The scheme is implemented in a project for wheelchair navigation using wireless camera motes. © 2013 IEEE

FPGA based Network Security Architecture for High Speed Networks

Cryptography and Network Security in high speed networks demands for specialized hardware in order to match up with the network speed. These hardware modules are being realized using reconfigurable FPGA technology to support heavy computation. Our work is mainly based on designing an efficient architecture for a cryptographic module and a network intrusion detection system for a high speed network. All the designs are coded using VHDL and are synthesized using Xilinx ISE for verifying their functionality. Virtex II pro FPGA is chosen as the target device for realization of the proposed design. In the cryptographic module, International Data Encryption Algorithm (IDEA), a symmetric key block cipher is chosen as the algorithm for implementation. The design goal is to increase the data conversion rate i.e the throughput to a substantial value so that the design can be used as a cryptographic coprocessor in high speed network applications. We have proposed a new n bit multiplier in the design which generates less number of partial products less than n/2 and the operands are in diminished-one representation. The multiplication is based on Radix-8 Booth's recoding with different combinations of outer round and inner round pipelining approach and a substantial high throughput to area ratio is achieved. The Network Intrusion Detection System (NIDS) module is designed for scanning suspicious patterns in data packets incoming to the network. Scanning a data packet against multiple patterns in quick time is a highly computational intensive task. A string matching module is realized using a memory efficient multi hashing data structure called Bloom Filter, in which multiple patterns can be matched in a single clock cycle. A separate parallel hash module is also designed for eliminating the packets which are treated as false positives. The string matching module is coded and functionally verified using VHDL targeting Virtex II pro FPGA and performance evaluation is made in terms of speed and resource utilization

New hardware support transactional memory and parallel debugging in multicore processors

This thesis contributes to the area of hardware support for parallel programming by introducing new hardware elements in multicore processors, with the aim of improving the performance and optimize new tools, abstractions and applications related with parallel programming, such as transactional memory and data race detectors. Specifically, we configure a hardware transactional memory system with signatures as part of the hardware support, and we develop a new hardware filter for reducing the signature size. We also develop the first hardware asymmetric data race detector (which is also able to tolerate them), based also in hardware signatures. Finally, we propose a new module of hardware signatures that solves some of the problems that we found in the previous tools related with the lack of flexibility in hardware signatures

Arquitectura, técnicas y modelos para posibilitar la Ciencia de Datos en el Archivo de la Misión Gaia

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadores y Automática, leída el 26/05/2017.The massive amounts of data that the world produces every day pose new challenges to modern societies in terms of how to leverage their inherent value. Social networks, instant messaging, video, smart devices and scientific missions are just mere examples of the vast number of sources generating data every second. As the world becomes more and more digitalized, new needs arise for organizing, archiving, sharing, analyzing, visualizing and protecting the ever-increasing data sets, so that we can truly develop into a data-driven economy that reduces inefficiencies and increases sustainability, creating new business opportunities on the way. Traditional approaches for harnessing data are not suitable any more as they lack the means for scaling to the larger volumes in a timely and cost efficient manner. This has somehow changed with the advent of Internet companies like Google and Facebook, which have devised new ways of tackling this issue. However, the variety and complexity of the value chains in the private sector as well as the increasing demands and constraints in which the public one operates, needs an ongoing research that can yield newer strategies for dealing with data, facilitate the integration of providers and consumers of information, and guarantee a smooth and prompt transition when adopting these cutting-edge technological advances. This thesis aims at providing novel architectures and techniques that will help perform this transition towards Big Data in massive scientific archives. It highlights the common pitfalls that must be faced when embracing it and how to overcome them, especially when the data sets, their transformation pipelines and the tools used for the analysis are already present in the organizations. Furthermore, a new perspective for facilitating a smoother transition is laid out. It involves the usage of higher-level and use case specific frameworks and models, which will naturally bridge the gap between the technological and scientific domains. This alternative will effectively widen the possibilities of scientific archives and therefore will contribute to the reduction of the time to science. The research will be applied to the European Space Agency cornerstone mission Gaia, whose final data archive will represent a tremendous discovery potential. It will create the largest and most precise three dimensional chart of our galaxy (the Milky Way), providing unprecedented position, parallax and proper motion measurements for about one billion stars. The successful exploitation of this data archive will depend to a large degree on the ability to offer the proper architecture, i.e. infrastructure and middleware, upon which scientists will be able to do exploration and modeling with this huge data set. In consequence, the approach taken needs to enable data fusion with other scientific archives, as this will produce the synergies leading to an increment in scientific outcome, both in volume and in quality. The set of novel techniques and frameworks presented in this work addresses these issues by contextualizing them with the data products that will be generated in the Gaia mission. All these considerations have led to the foundations of the architecture that will be leveraged by the Science Enabling Applications Work Package. Last but not least, the effectiveness of the proposed solution will be demonstrated through the implementation of some ambitious statistical problems that will require significant computational capabilities, and which will use Gaia-like simulated data (the first Gaia data release has recently taken place on September 14th, 2016). These ambitious problems will be referred to as the Grand Challenge, a somewhat grandiloquent name that consists in inferring a set of parameters from a probabilistic point of view for the Initial Mass Function (IMF) and Star Formation Rate (SFR) of a given set of stars (with a huge sample size), from noisy estimates of their masses and ages respectively. This will be achieved by using Hierarchical Bayesian Modeling (HBM). In principle, the HBM can incorporate stellar evolution models to infer the IMF and SFR directly, but in this first step presented in this thesis, we will start with a somewhat less ambitious goal: inferring the PDMF and PDAD. Moreover, the performance and scalability analyses carried out will also prove the suitability of the models for the large amounts of data that will be available in the Gaia data archive.Las grandes cantidades de datos que se producen en el mundo diariamente plantean nuevos retos a la sociedad en términos de cómo extraer su valor inherente. Las redes sociales, mensajería instantánea, los dispositivos inteligentes y las misiones científicas son meros ejemplos del gran número de fuentes generando datos en cada momento. Al mismo tiempo que el mundo se digitaliza cada vez más, aparecen nuevas necesidades para organizar, archivar, compartir, analizar, visualizar y proteger la creciente cantidad de datos, para que podamos desarrollar economías basadas en datos e información que sean capaces de reducir las ineficiencias e incrementar la sostenibilidad, creando nuevas oportunidades de negocio por el camino. La forma en la que se han manejado los datos tradicionalmente no es la adecuada hoy en día, ya que carece de los medios para escalar a los volúmenes más grandes de datos de una forma oportuna y eficiente. Esto ha cambiado de alguna manera con la llegada de compañías que operan en Internet como Google o Facebook, ya que han concebido nuevas aproximaciones para abordar el problema. Sin embargo, la variedad y complejidad de las cadenas de valor en el sector privado y las crecientes demandas y limitaciones en las que el sector público opera, necesitan una investigación continua en la materia que pueda proporcionar nuevas estrategias para procesar las enormes cantidades de datos, facilitar la integración de productores y consumidores de información, y garantizar una transición rápida y fluida a la hora de adoptar estos avances tecnológicos innovadores. Esta tesis tiene como objetivo proporcionar nuevas arquitecturas y técnicas que ayudarán a realizar esta transición hacia Big Data en archivos científicos masivos. La investigación destaca los escollos principales a encarar cuando se adoptan estas nuevas tecnologías y cómo afrontarlos, principalmente cuando los datos y las herramientas de transformación utilizadas en el análisis existen en la organización. Además, se exponen nuevas medidas para facilitar una transición más fluida. Éstas incluyen la utilización de software de alto nivel y específico al caso de uso en cuestión, que haga de puente entre el dominio científico y tecnológico. Esta alternativa ampliará de una forma efectiva las posibilidades de los archivos científicos y por tanto contribuirá a la reducción del tiempo necesario para generar resultados científicos a partir de los datos recogidos en las misiones de astronomía espacial y planetaria. La investigación se aplicará a la misión de la Agencia Espacial Europea (ESA) Gaia, cuyo archivo final de datos presentará un gran potencial para el descubrimiento y hallazgo desde el punto de vista científico. La misión creará el catálogo en tres dimensiones más grande y preciso de nuestra galaxia (la Vía Láctea), proporcionando medidas sin precedente acerca del posicionamiento, paralaje y movimiento propio de alrededor de mil millones de estrellas. Las oportunidades para la explotación exitosa de este archivo de datos dependerán en gran medida de la capacidad de ofrecer la arquitectura adecuada, es decir infraestructura y servicios, sobre la cual los científicos puedan realizar la exploración y modelado con esta inmensa cantidad de datos. Por tanto, la estrategia a realizar debe ser capaz de combinar los datos con otros archivos científicos, ya que esto producirá sinergias que contribuirán a un incremento en la ciencia producida, tanto en volumen como en calidad de la misma. El conjunto de técnicas e infraestructuras innovadoras presentadas en este trabajo aborda estos problemas, contextualizándolos con los productos de datos que se generarán en la misión Gaia. Todas estas consideraciones han conducido a los fundamentos de la arquitectura que se utilizará en el paquete de trabajo de aplicaciones que posibilitarán la ciencia en el archivo de la misión Gaia (Science Enabling Applications). Por último, la eficacia de la solución propuesta se demostrará a través de la implementación de dos problemas estadísticos que requerirán cantidades significativas de cómputo, y que usarán datos simulados en el mismo formato en el que se producirán en el archivo de la misión Gaia (la primera versión de datos recogidos por la misión está disponible desde el día 14 de Septiembre de 2016). Estos ambiciosos problemas representan el Gran Reto (Grand Challenge), un nombre grandilocuente que consiste en inferir una serie de parámetros desde un punto de vista probabilístico para la función de masa inicial (Initial Mass Function) y la tasa de formación estelar (Star Formation Rate) dado un conjunto de estrellas (con una muestra grande), desde estimaciones con ruido de sus masas y edades respectivamente. Esto se abordará utilizando modelos jerárquicos bayesianos (Hierarchical Bayesian Modeling). Enprincipio,losmodelospropuestos pueden incorporar otros modelos de evolución estelar para inferir directamente la función de masa inicial y la tasa de formación estelar, pero en este primer paso presentado en esta tesis, empezaremos con un objetivo algo menos ambicioso: la inferencia de la función de masa y distribución de edades actual (Present-Day Mass Function y Present-Day Age Distribution respectivamente). Además, se llevará a cabo el análisis de rendimiento y escalabilidad para probar la idoneidad de la implementación de dichos modelos dadas las enormes cantidades de datos que estarán disponibles en el archivo de la misión Gaia...Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu

Efficient processing of similarity queries with applications

Today, a myriad of data sources, from the Internet to business operations to scientific instruments, produce large and different types of data. Many application scenarios, e.g., marketing analysis, sensor networks, and medical and biological applications, call for identifying and processing similarities in big data. As a result, it is imperative to develop new similarity query processing approaches and systems that scale from low dimensional data to high dimensional data, from single machine to clusters of hundreds of machines, and from disk-based to memory-based processing. This dissertation introduces and studies several similarity-aware query operators, analyzes and optimizes their performance. The first contribution of this dissertation is an SQL-based Similarity Group-by operator (SGB, for short) that extends the semantics of the standard SQL Group-by operator to group data with similar but not necessarily equal values. We realize these SGB operators by extending the Standard SQL Group-by and introduce two new SGB operators for multi-dimensional data. We implement and test the new SGB operators and their algorithms inside an open-source centralized database server (PostgreSQL). In the second contribution of this dissertation, we study how to efficiently process Hamming-distance-based similarity queries (Hamming-distance select and Hamming-distance join) that are crucial to many applications. We introduce a new index, termed the HA-Index, that speeds up distance comparisons and eliminates redundancies when performing the two flavors of Hamming distance range queries (namely, the selects and joins). In the third and last contribution of this dissertation, we develop a system for similarity query processing and optimization in an in-memory and distributed setup for big spatial data. We propose a query scheduler and a distributed query optimizer that use a new cost model to optimize the cost of similarity query processing in this in-memory distributed setup. The scheduler and query optimizer generates query execution plans that minimize the effect of query skew. The query scheduler employs new spatial indexing techniques based on bloom filters to forward queries to the appropriate local sites. The proposed query processing and optimization techniques are prototyped inside Spark, a distributed main-memory computation system

A Paradigm for Scalable, Transactional, and Efficient Spatial Indexes

With large volumes of geo-tagged data collected in various applications, spatial query pro- cessing becomes essential. Query engines depend on efficient indexes to expedite processing. There are three main challenges: scaling out to accommodate large volumes of spatial data, support- ing transactional primitives for strong consistency guarantees, and adapting to highly dynamic workloads. This thesis proposes a paradigm for scalable, transactional, and efficient spatial indexes to significantly reduce development efforts in designing and comparing multiple spatial indexes.This thesis first introduces a distributed and transactional key value store called DTranx to persist the spatial indexes. DTranx follows the SEDA architecture to exploit high concurrency in multi-core environments and it adopts a hybrid of optimistic concurrency control and two-phase commit protocols to narrow down the critical sections of distributed locking during transaction com- mits. Moreover, DTranx integrates a persistent memory based write-ahead log to reduce durability overhead and combines a garbage collection mechanism without affecting normal transactions. To maintain high throughput for search workloads when databases are constantly updated, snapshot transactions are introduced.Then, a paradigm is presented with a set of intuitive APIs and a Mempool runtime to re- duce development efforts. Mempool transparently synchronizes local states of data structures with DTranx and it handles two critical tasks: address translation and transparent server synchroniza- tion, of which the latter includes transaction construction and data synchronization. Furthermore, a dynamic partitioning strategy is integrated into DTranx to generate partitioning and replication plans that reduce inter-server communications and balance resource usage.Lastly, single-threaded data structures BTree and RTree are converted into distributed versions within two weeks. The BTree and RTree achieve 253.07 kops/sec and 77.83 kops/sec through- put respectively for pure search operations in a 25-server cluster

Cyber Security of Critical Infrastructures

Critical infrastructures are vital assets for public safety, economic welfare, and the national security of countries. The vulnerabilities of critical infrastructures have increased with the widespread use of information technologies. As Critical National Infrastructures are becoming more vulnerable to cyber-attacks, their protection becomes a significant issue for organizations as well as nations. The risks to continued operations, from failing to upgrade aging infrastructure or not meeting mandated regulatory regimes, are considered highly significant, given the demonstrable impact of such circumstances. Due to the rapid increase of sophisticated cyber threats targeting critical infrastructures with significant destructive effects, the cybersecurity of critical infrastructures has become an agenda item for academics, practitioners, and policy makers. A holistic view which covers technical, policy, human, and behavioural aspects is essential to handle cyber security of critical infrastructures effectively. Moreover, the ability to attribute crimes to criminals is a vital element of avoiding impunity in cyberspace. In this book, both research and practical aspects of cyber security considerations in critical infrastructures are presented. Aligned with the interdisciplinary nature of cyber security, authors from academia, government, and industry have contributed 13 chapters. The issues that are discussed and analysed include cybersecurity training, maturity assessment frameworks, malware analysis techniques, ransomware attacks, security solutions for industrial control systems, and privacy preservation methods