Context-Aware Self-Healing for Small Cell Networks

These can be an invaluable source of information for the management of the network, in a way that we have denominated as context-aware SON, which is the approach proposed in this thesis. To develop this concept, the thesis follows a top-down approach. Firstly, the characteristics of the cellular deployments are assessed, especially for indoor small cell networks. In those scenarios, the need for context-aware SON is evaluated and considered indispensable. Secondly, a new cellular architecture is defined to integrate both context information and SON mechanisms in the management plane of the mobile network. Thus, the specifics of making context an integral part of cellular OAM/SON are defined. Also, the real-world implementation of the architecture is proposed. Thirdly, from the established general SON architecture, a logical self-healing framework is defined to support the context-aware healing mechanisms to be developed. Fourthly, different self-healing algorithms are defined depending on the failures to be managed and the conditions of the considered scenario. The mechanisms are based on probabilistic analysis, making use of both context and network data for detection and diagnosis of cellular issues. The conditions for the implementation of these methods are assessed. Their applicability is evaluated by means of simulators and testbed trials. The results show important improvements in performance and capabilities in comparison to previous methods, demonstrating the relevance of the proposed approach.The last years have seen a continuous increase in the use of mobile communications. To cope with the growing traffic, recently deployed technologies have deepened the adoption of small cells (low powered base stations) to serve areas with high demand or coverage issues, where macrocells can be both unsuccessful or inefficient. Also, new cellular and non-cellular technologies (e.g. WiFi) coexist with legacy ones, including also multiple deployment schemes (macrocell, small cells), in what is known as heterogeneous networks (HetNets). Due to the huge complexity of HetNets, their operation, administration and management (OAM) became increasingly difficult. To overcome this, the NGMN Alliance and the 3GPP defined the Self-Organizing Network (SON) paradigm, aiming to automate the OAM procedures to reduce their costs and increase the resulting performance. One key focus of SON is the self-healing of the network, covering the automatic detection of problems, the diagnosis of their causes, their compensation and their recovery. Until recently, SON mechanisms have been solely based on the analysis of alarms and performance indicators. However, on the one hand, this approach has become very limited given the complexity of the scenarios, and particularly in indoor cellular environments. Here, the deployment of small cells, their coexistence with multiple telecommunications systems and the nature of those environments (in terms of propagation, coverage overlapping, fast demand changes and users' mobility) introduce many challenges for classic SON. On the other hand, modern user equipment (e.g. smartphones), equipped with powerful processors, sensors and applications, generate a huge amount of context information. Context refers to those variables not directly associated with the telecommunication service, but with the terminals and their environment. This includes the user's position, applications, social data, etc

Quality of service optimization of multimedia traffic in mobile networks

Mobile communication systems have continued to evolve beyond the currently deployed Third Generation (3G) systems with the main goal of providing higher capacity. Systems beyond 3G are expected to cater for a wide variety of services such as speech, data, image transmission, video, as well as multimedia services consisting of a combination of these. With the air interface being the bottleneck in mobile networks, recent enhancing technologies such as the High Speed Downlink Packet Access (HSDPA), incorporate major changes to the radio access segment of 3G Universal Mobile Telecommunications System (UMTS). HSDPA introduces new features such as fast link adaptation mechanisms, fast packet scheduling, and physical layer retransmissions in the base stations, necessitating buffering of data at the air interface which presents a bottleneck to end-to-end communication. Hence, in order to provide end-to-end Quality of Service (QoS) guarantees to multimedia services in wireless networks such as HSDPA, efficient buffer management schemes are required at the air interface. The main objective of this thesis is to propose and evaluate solutions that will address the QoS optimization of multimedia traffic at the radio link interface of HSDPA systems. In the thesis, a novel queuing system known as the Time-Space Priority (TSP) scheme is proposed for multimedia traffic QoS control. TSP provides customized preferential treatment to the constituent flows in the multimedia traffic to suit their diverse QoS requirements. With TSP queuing, the real-time component of the multimedia traffic, being delay sensitive and loss tolerant, is given transmission priority; while the non-real-time component, being loss sensitive and delay tolerant, enjoys space priority. Hence, based on the TSP queuing paradigm, new buffer managementalgorithms are designed for joint QoS control of the diverse components in a multimedia session of the same HSDPA user. In the thesis, a TSP based buffer management algorithm known as the Enhanced Time Space Priority (E-TSP) is proposed for HSDPA. E-TSP incorporates flow control mechanisms to mitigate congestion in the air interface buffer of a user with multimedia session comprising real-time and non-real-time flows. Thus, E-TSP is designed to provide efficient network and radio resource utilization to improve end-to-end multimedia traffic performance. In order to allow real-time optimization of the QoS control between the real-time and non-real-time flows of the HSDPA multimedia session, another TSP based buffer management algorithm known as the Dynamic Time Space Priority (D-TSP) is proposed. D-TSP incorporates dynamic priority switching between the real-time and non-real-time flows. D-TSP is designed to allow optimum QoS trade-off between the flows whilst still guaranteeing the stringent real-time component’s QoS requirements. The thesis presents results of extensive performance studies undertaken via analytical modelling and dynamic network-level HSDPA simulations demonstrating the effectiveness of the proposed TSP queuing system and the TSP based buffer management schemes

Benefits and limits of machine learning for the implicit coordination on SON functions

Bedingt durch die Einführung neuer Netzfunktionen in den Mobilfunknetzen der nächsten Generation, z. B. Slicing oder Mehrantennensysteme, sowie durch die Koexistenz mehrerer Funkzugangstechnologien, werden die Optimierungsaufgaben äußerst komplex und erhöhen die OPEX (OPerational EXpenditures). Um den Nutzern Dienste mit wettbewerbsfähiger Dienstgüte (QoS) zu bieten und gleichzeitig die Betriebskosten niedrig zu halten, wurde von den Standardisierungsgremien das Konzept des selbstorganisierenden Netzes (SON) eingeführt, um das Netzmanagement um eine Automatisierungsebene zu erweitern. Es wurden dafür mehrere SON-Funktionen (SFs) vorgeschlagen, um einen bestimmten Netzbereich, wie Abdeckung oder Kapazität, zu optimieren. Bei dem konventionellen Entwurf der SFs wurde jede Funktion als Regler mit geschlossenem Regelkreis konzipiert, der ein lokales Ziel durch die Einstellung bestimmter Netzwerkparameter optimiert. Die Beziehung zwischen mehreren SFs wurde dabei jedoch bis zu einem gewissen Grad vernachlässigt. Daher treten viele widersprüchliche Szenarien auf, wenn mehrere SFs in einem mobilen Netzwerk instanziiert werden. Solche widersprüchlichen Funktionen in den Netzen verschlechtern die QoS der Benutzer und beeinträchtigen die Signalisierungsressourcen im Netz. Es wird daher erwartet, dass eine existierende Koordinierungsschicht (die auch eine Entität im Netz sein könnte) die Konflikte zwischen SFs lösen kann. Da diese Funktionen jedoch eng miteinander verknüpft sind, ist es schwierig, ihre Interaktionen und Abhängigkeiten in einer abgeschlossenen Form zu modellieren. Daher wird maschinelles Lernen vorgeschlagen, um eine gemeinsame Optimierung eines globalen Leistungsindikators (Key Performance Indicator, KPI) so voranzubringen, dass die komplizierten Beziehungen zwischen den Funktionen verborgen bleiben. Wir nennen diesen Ansatz: implizite Koordination. Im ersten Teil dieser Arbeit schlagen wir eine zentralisierte, implizite und auf maschinellem Lernen basierende Koordination vor und wenden sie auf die Koordination zweier etablierter SFs an: Mobility Robustness Optimization (MRO) und Mobility Load Balancing (MLB). Anschließend gestalten wir die Lösung dateneffizienter (d. h. wir erreichen die gleiche Modellleistung mit weniger Trainingsdaten), indem wir eine geschlossene Modellierung einbetten, um einen Teil des optimalen Parametersatzes zu finden. Wir nennen dies einen "hybriden Ansatz". Mit dem hybriden Ansatz untersuchen wir den Konflikt zwischen MLB und Coverage and Capacity Optimization (CCO) Funktionen. Dann wenden wir ihn auf die Koordinierung zwischen MLB, Inter-Cell Interference Coordination (ICIC) und Energy Savings (ES) Funktionen an. Schließlich stellen wir eine Möglichkeit vor, MRO formal in den hybriden Ansatz einzubeziehen, und zeigen, wie der Rahmen erweitert werden kann, um anspruchsvolle Netzwerkszenarien wie Ultra-Reliable Low Latency Communications (URLLC) abzudecken.Due to the introduction of new network functionalities in next-generation mobile networks, e.g., slicing or multi-antenna systems, as well as the coexistence of multiple radio access technologies, the optimization tasks become extremely complex, increasing the OPEX (OPerational EXpenditures). In order to provide services to the users with competitive Quality of Service (QoS) while keeping low operational costs, the Self-Organizing Network (SON) concept was introduced by the standardization bodies to add an automation layer to the network management. Thus, multiple SON functions (SFs) were proposed to optimize a specific network domain, like coverage or capacity. The conventional design of SFs conceived each function as a closed-loop controller optimizing a local objective by tuning specific network parameters. However, the relationship among multiple SFs was neglected to some extent. Therefore, many conflicting scenarios appear when multiple SFs are instantiated in a mobile network. Having conflicting functions in the networks deteriorates the users’ QoS and affects the signaling resources in the network. Thus, it is expected to have a coordination layer (which could also be an entity in the network), conciliating the conflicts between SFs. Nevertheless, due to interleaved linkage among those functions, it is complex to model their interactions and dependencies in a closed form. Thus, machine learning is proposed to drive a joint optimization of a global Key Performance Indicator (KPI), hiding the intricate relationships between functions. We call this approach: implicit coordination. In the first part of this thesis, we propose a centralized, fully-implicit coordination approach based on machine learning (ML), and apply it to the coordination of two well-established SFs: Mobility Robustness Optimization (MRO) and Mobility Load Balancing (MLB). We find that this approach can be applied as long as the coordination problem is decomposed into three functional planes: controllable, environmental, and utility planes. However, the fully-implicit coordination comes at a high cost: it requires a large amount of data to train the ML models. To improve the data efficiency of our approach (i.e., achieving good model performance with less training data), we propose a hybrid approach, which mixes ML with closed-form models. With the hybrid approach, we study the conflict between MLB and Coverage and Capacity Optimization (CCO) functions. Then, we apply it to the coordination among MLB, Inter-Cell Interference Coordination (ICIC), and Energy Savings (ES) functions. With the hybrid approach, we find in one shot, part of the parameter set in an optimal manner, which makes it suitable for dynamic scenarios in which fast response is expected from a centralized coordinator. Finally, we present a manner to formally include MRO in the hybrid approach and show how the framework can be extended to cover challenging network scenarios like Ultra-Reliable Low Latency Communications (URLLC)

Context-based Resource Management and Slicing for SDN-enabled 5G Smart, Connected Environments

Τα συστήματα κινητής επικοινωνίας πέμπτης γενιάς (5G) τα οποία αναμένονται τα αμέσως επόμενα χρόνια, θα αντιμετωπίσουν πρωτοφανείς απαιτήσεις όσον αφορά τον όγκο και το ρυθμό μεταδόσης δεδομένων, τις καθυστερήσεις του δικτύου, καθώς και τον αριθμό των συνδεδεμένων συσκευών. Τα μελλοντικά δικτυακά οικοσυστήματα θα περιλαμβάνουν μια πληθώρα τεχνολογιών ασύρματης επικοινωνίας (είτε τεχνολογιών 3GPP, είτε μη-3GPP) όπως το Wi-Fi, το 3G, το 4G ή LTE, το Bluetooth, κτλ. Τα σενάρια ανάπτυξης του 5G προβλέπουν έναν πολυεπίπεδο συνδυασμό μακρο- και μικρο-κυψελών, όπου πολυλειτουργικές συσκευές –οι οποίες μπορούν να υποστηρίξουν ποικιλία διαφορετικών εφαρμογών και υπηρεσιών- εξυπηρετούνται από διαφορετικές τεχνολογίες. Οι περιορισμοί που υπήρξαν στα παλιότερα συστήματα κινητών επικοινωνιών πρέπει να εξαλειφθούν, ανοίγοντας το δρόμο για ένα νέο κύμα υπηρεσιών και συνολική εμπειρία χρήστη. Ως εκ τούτου, η διαχείριση των ασύρματων πόρων μέσω της χαρτογράφησης και διανομής τους στις κινητές συσκευές, μέσω της πλέον κατάλληλης τεχνολογίας πρόσβασης, η οποία εξυπηρετεί τις ανάγκες των συγκεκριμένων υπηρεσιών/εφαρμογών αποκτά πρωταρχική σημασία. Οι κύριοι μηχανισμοί διαχείρισης πόρων δικτύου πρόσβασης δηλαδή η επιλογή κυψέλης (cell selection/reselection), η παράδοση υπηρεσίας από τη μία κυψέλη στην άλλη (handover), καθώς και ο έλεγχος εισαγωγής κλήσεων/υπηρεσιών (call/service admission control), είναι αυτοί που τελικώς θα μπορέσουν να προσφέρουν στους χρήστες εξαιρετικά υψηλή ποιότητα υπηρεσιών (Quality of Service - QoS) και εμπειρίας (Quality of Experience - QoE) προς τις πολύ απαιτητικές περιπτώσεις χρήσης του 5G. Αυτό θα γίνει εφικτό μέσω της βελτιστοποίησης του συσχετισμού-χαρτογράφησης μεταξύ των διαφορετικών (τελικών) κινητών συσκευών και των συνυπαρχόντων ασύρματων δικτύων πρόσβασης. Επιπλέον της οπτικής του χρήστη, οι Πάροχοι Δικτύων Κινητής θα είναι σε θέση να εκμεταλλευτούν τη μέγιστη αποδοτικότητα και χρήση των –ήδη δυσεύρετων- ασύρματων πόρων. Ευφυείς βελτιστοποιήσεις και αποδοτικές λύσεις όσον αφορά το κόστος και την κατανάλωση ενέργειας πρέπει επίσης να εισαχθούν στα δίκτυα 5ης γενιάς με σκοπό να προάγουν ένα συνεκτικό, στοχευμένο στο χρήστη και πολυδιάστατο οικοσύστημα πληροφοριών. Η παρούσα διατριβή αυτή εστιάζει στη Διαχείριση Ασύρματων Δικτυακών Πόρων (ΔΑΔΠ - RRM) από την οπτική των κύριων διαδικασιών που σχετίζονται με την επιλογή ασύρματης τεχνολογίας πρόσβασης και στρώματος κυψέλης (μικρο-, μάκρο κυψέλη, κτλ.), δηλαδή η επιλογή κυψέλης, η παράδοση υπηρεσίας και ο έλεγχος εισαγωγής κλήσεων/υπηρεσιών. Έπειτα, η διατριβή προχωρά ένα βήμα παραπέρα, με σκοπό να συνδέσει τη ΔΑΔΠ με μία από τις πιο πρόσφατες προσεγγίσεις διαχείρισης δικτυακών πόρων, δηλαδή τον «τεμαχισμό δικτύου» (network slicing), όπως αυτή εισάγεται σε περιβάλλοντα που χρησιμοποιούν τη μέθοδος της Δικτύωσης Βασισμένης στο Λογισμικό (Software Defined Networking), η οποία δημιουργεί μικρότερα, εικονικά τμήματα του δικτύου, προσαρμοσμένα και βελτιστοποιημένα για συκεκριμένες υπηρεσίες και αντίστοιχες απαιτήσεις. Σαν πρώτο βήμα, πραγματοποιήθηκε μια ολοκληρωμένη ανάλυση για τις υπάρχουσες λύσεις – όπως αυτές προδιαγράφονται στα πρότυπα της 3GPP, στη βιβλιογραφία, καθώς και τις σχετικές πατέντες-. Η διατριβή αυτή αρχικά εντοπίζει τους δεσμούς μεταξύ των προσπαθειών της ερευνητικής κοινότητας, των υλοποιήσεων της βιομηχανίας, καθώς και των δράσεων προτυποποίησης, σε μια προσπάθεια να επισημανθούν ρεαλιστικές λύσεις εφαρμογής, να προσδιοριστούν οι κύριοι στόχοι, τα πλεονεκτήματα, αλλά και οι ελλείψεις αυτών των προσπαθειών. Όπως θα δειχθεί, οι υπάρχουσες λύσεις προσπαθούν να εξισορροπήσουν σε ένα σημείο μεταξύ της βέλτιστης λύσης και μιας απλής υλοποίησης. Έτσι, οι λύσεις που έχουν προταθεί είτε είναι απλοποιημένες σε τέτοιο βαθμό που απομακρύνονται από μια ρεαλιστική πρόταση, και επιτυγχάνουν υπο-βέλτιστες λύσεις ή από την άλλη παρέχουν πολύ σημαντικές βελτιώσεις, αλλά η πολυπλοκότητά τους και η επιβάρυνση που επιβάλλουν στο δίκτυο (όσον αφορά για παράδειγμα κόστος σηματοδοσίας, ή επεξεργαστικής ισχύος) τις καθιστούν ελκυστικές για μια πραγματική ανάπτυξη. Προς αυτή την κατεύθυνση, η παρούσα διατριβή εισαγωγή ένα σύνολο μηχανισμών επίγνωσης πλαισίου για τη διαχείριση δικτυακών πόρων, που αποτελείται από τρεις επιμέρους μηχανισμούς με διακριτό ρόλο: Δύο από τους μηχανισμούς χρησιμοποιούν πληροφορία πλαισίου με σκοπό τη βελτίωση τη διαχείριση πόρων και και τη χαρτογράφηση μεταξύ ροών δεδομένων κινητών συσκευών και κυψέλης/τεχνολογίας δικτύου. Ο τρίτος μηχανισμός δρα με έναν ενισχυτικό ρόλο στους δύο προηγούμενους, μέσω μιας προ-επεξεργασίας που πραγματοποιεί πάνω σε πληροφορία πλαισίου, με σκοπό τον περιορισμό του κόστους της επιπλέον σηματοδοσίας που απαιτείται για την μεταφορά της πληροφορίας πλαισίου μεταξύ των διαφόρων ενδιαφερόμενων δικτυακών οντοτήτων. Εκτός από τους τρεις μηχανισμούς αυτούς, πραγματοποιήθηκαν εκτενείς μελέτες σε σχέση με αρχιτεκτονικά ζητήματα και πτυχές, στο πλαίσιο της επικείμενης αρχιτεκτονικής δικτύου 5G και χαρτογράφηση των προτεινόμενων μηχανισμών στα συστατικά στοιχεία του δικτύου 5G -όπως αυτά εισήχθησαν στα τελευταίο κείμενα προτυποποίησης της 3GPP-. Η πρώτη κύρια συμβολή της παρούσας διατριβής είναι το COmpAsS, ένας μηχανισμός επιλογής Τεχνολογίας Ασύρματης Πρόσβασης πολλαπλών κριτηρίων, με γνώμονα το περιβάλλον, το κύριο μέρος του οποίου λειτουργεί στην πλευρά του Εξοπλισμού Χρήστη (UE), ελαχιστοποιώντας με αυτό τον τρόπο τις επιβαρύνσεις σηματοδότησης στη διεπαφή αέρα και το φορτίο υπολογισμού στους σταθμούς βάσης. Ο μηχανισμός COmpAsS εκτελεί παρακολούθηση σε πραγματικό χρόνο, υιοθετώντας την Ασαφή Λογική (Fuzzy Logic -FL) ως μία από τις βασικές προσεγγίσεις αντίληψης και ανάλυσης της κατάστασης του δικτύου. Σε συνδυασμό με ένα σύνολο προκαθορισμένων κανόνων, υπολογίζει μια λίστα με τις καταλληλότερες διαθέσιμες επιλογές πρόσβασης δικτύου, για κάθε μία από τις ροές δεδομένων/υπηρεσίας που είναι ενεργές εκείνη τη στιγμή. Τα πλεονεκτήματα του COmpAsS παρουσιάζονται μέσω μιας εκτεταμένης σειράς σεναρίων προσομοίωσης, ως μέρος των περιπτώσεων χρήσης εξαιρετικά πυκνών δικτύων (UDN) 5G. Τα αποτελέσματα αποδεικνύουν τον τρόπο με τον οποίο ο προτεινόμενος μηχανισμός βελτιστοποιεί τους βασικούς δείκτες επιδόσεων (Key Performance Indicators - KPIs), όταν αντιπαρατίθεται σε έναν από τους καθιερωμένους LTE αλγορίθμους. Η δεύτερη σημαντική συμβολή της παρούσας διατριβής είναι η Μηχανή Εξόρυξης Πλαισίου και Δημιουργίας Προφίλ (Context Extraction and Profiling Engine – CEPE), ένας μηχανισμός διαχείρισης πόρων, ο οποίος αναλύει συμπεριφορικά πρότυπα των χρηστών/κινητών συσκευών, εξάγει ουσιώδη γνώση και δημιουργεί αντίστοιχα προφίλ/πρότυπα συμπεριφοράς, με σκοπό να τα χρησιμοποιήσει για βέλτιστο προγραμματισμό πόρων, καθώς επίσης και για την μελλοντική πρόβλεψη απαιτήσεων πόρων. Το CEPE συλλέγει πληροφορίες σχετικά με τους χρήστες, τις υπηρεσίες, τις κινητές συσκευές, καθώς και τις συνθήκες δικτύου, και μέσω επεξεργασίας -χωρίς σύνδεση, ετεροχρονισμένα- αποκτά ένα μοντέλο γνώσης, το οποίο στη συνέχεια χρησιμοποιείται για τη βελτιστοποίηση των κύριων μηχανισμών ΔΑΔΠ (RRM). Το προαναφερθέν μοντέλο γνώσης μεταφράζεται έπειτα σε προφίλ χρηστών/κινητών συσκευών, τα οποία εφαρμόζονται ως είσοδος κατά τις διαδικασίες ΔΑΔΠ. Η βιωσιμότητα και η εγκυρότητα του CEPE επιδεικνύεται μέσω εκτεταμένων σεναρίων προσομοίωσης. Η τρίτη σημαντική συμβολή είναι το CIP (Context Information Preprocessor), ένας μηχανισμός προεπεξεργασίας πληροφοριών πλαισίου, με στόχο τον εντοπισμό και την απόρριψη περιττών δεδομένων κατά τη σηματοδοσία πριν από την εξαγωγή της γνώσης. Το CIP θα μπορούσε να θεωρηθεί ως αναπόσπαστο μέρος των προαναφερθέντων σχημάτων σχεδίασης, δηλαδή των COmpAsS και CEPE. Ο προτεινόμενος μηχανισμός περιλαμβάνει τη συγκέντρωση και συμπίεση πληροφοριών πλαισίου σχετικά με το δίκτυο ανά μοναδικό αναγνωριστικό κινητής συσκευής/χρήστη, -όπως η διεθνής ταυτότητα συνδρομητή κινητού (IMSI)-, καθώς και τεχνικές που σχετίζονται με την αναγνώριση και την απόρριψη δεδομένων πλαισίου που δε συμβάλλουν στην βελτίωση ή διόρθωση του πρόφιλ χρήστη, πριν από οποιαδήποτε μετάδοση προς το CEPE (ή άλλο μηχανισμό ΔΑΔΠ). Οι βελτιώσεις και τα κέρδη του CIP στη διαδικασία της σηματοδοσίας απεικονίζονται μέσω λεπτομερούς αναλυτικής προσέγγισης, η οποία καθορίζεται από τις καθιερωμένες απαιτήσεις περί χρήσης 5G. Ως τελική σημαντική συμβολή αυτής της διατριβής, διεξάγεται μια εκτεταμένη ανάλυση όσον αφορά τη διασύνδεση των CEPE-COmpAsS, στο πλαίσιο της επικείμενης αρχιτεκτονικής δικτύου 5G και της χαρτογράφησης αυτών με τα τελευταία συστατικά στοιχεία του δικτύου 5G –όπως αυτά παρουσιάστηκαν στις τελευταίες δημοσιεύσεις προτυποποίησης της 3GPP -. Το έργο σε αυτή την ενότητα δείχνει πώς μπορεί να παρουσιαστεί το προτεινόμενο πλαίσιο ως μέρος των συνιστωσών του δικτύου 5G και των λειτουργιών που εισάγονται σε περιβάλλοντα με δυνατότητα SDN, όπως η προσέγγιση του «Τεμαχισμού Δικτύου», ο Μηχανισμός Ανάλυσης Δικτυακών Δεδομένων (Network Data Analytics Function – NWDAF), η λειτουργία επιλογής βέλτιστου τεμαχίου δικτύου (Network Slice Selection Function) - προς περαιτέρω βελτιστοποίηση της διανομής και της διαχείρισης των διαθέσιμων πόρων δικτύου μεταξύ των συσκευών-, καθώς και το ATSSS – Access Traffic Steering, Switching and Splitting, μια οντότητα υπεύθυνη για τη διαχείριση των ροών δεδομένων των UE –με δυνατότητες επαναδρομολόγησης, διαχωρισμού και σύνδεσης της κάθε ροής με την αντίστοιχη βέλτιστη, διαθέσιμη τεχνολογία πρόσβασης. Δύο συμπληρωματικές μελέτες περιλαμβάνονται –τέλος- σε αυτή τη διατριβή: μια αρχική ανάλυση των πολιτικών μηχανικής κυκλοφορίας (Traffic Engineering) που βασίζονται σε προφίλ χρηστών που προκύπτουν από το CEPE, καθώς και μία περίπτωση χρήσης 5G που σχετίζεται με τον τομέα του Διαδικτύου των Πραγμάτων - και πιο συγκεκριμένα την «Καλλιέργεια Ακριβείας» (Precision Farming), με σκοπό να δοθεί έμφαση σε ρητές απαιτήσεις των περιπτώσεων χρήσης 5G, όπως η επικοινωνία τύπου μηχανής κρίσιμης σημασίας (Mission-Critical Machine Type Communication).The fifth-generation (5G) mobile communication systems, which are expected to emerge in the forthcoming years, will address unprecedented demands in terms of system capacity, service latency and number of connected devices. Future 5G network ecosystems will comprise a plethora of 3GPP and non-3GGP Radio Access Technologies (RATs), such as Wi-Fi, 3G, 4G or LTE, Bluetooth, etc. Deployment scenarios envision a multi-layer combination of macro, micro and femto cells where multi-mode end devices, supporting diverse applications, are served by different technologies. Limitations previously posed by legacy generation systems need to be eliminated, paving the way to a new wave of services and overall experience for the user. As a result, the management of radio resources via mapping the end devices to the most appropriate access network becomes of paramount importance; the primary Radio Resource Management (RRM) mechanisms, i.e. cell selection/reselection, handover and call admission control will be able to offer extremely high Quality of Service (QoS) and Experience (QoE) to the users, towards the very demanding 5G use case requirements; this will be realised via an optimal association between the diverse end devices and the coexisting available access networks. Besides the user’s perspective, the Mobile Network Operators (MNOs) will be able to take advantage of the maximum efficiency and utilization over the –already scarce- wireless resources. Intelligent optimizations, as well as cost and energy efficient solutions need to be introduced in 5G networks in order to promote a consistent, user-centred and all-dimensional information ecosystem. This thesis focuses on the radio resource management (RRM) from the perspective of the primary RAT and cell layer selection processes (i.e., cell (re)selection, handover, admission control); afterwards, it goes one step beyond, in order to link the RRM with one of the latest RRM optimization approaches, i.e. the Network Slicing, as introduced in Software Defined Networking (SDN)-enabled environments, which creates smaller, virtual “portions” of the network, adapted and optimized for specific services/requirements. As a first step, a comprehensive analysis for the existing solutions -as these are specified in 3GPP standards, research papers, and patents has taken place. This thesis initially identifies the links between the research community efforts, the industry implementations, as well as the standardization efforts, in an attempt to highlight realistic solution implementations, identify the main goals, advantages and shortcomings of these efforts. As will be shown, existing solutions attempt to balance between implementation simplicity and solution optimality. Thus, solutions are either simple to implement but achieve sub-optimal solutions or provide significant improvements but their complexity and the burden placed on the network components renders them unattractive for a real-life deployment. Towards this end, this thesis introduces a context-based radio resource management (RRM) framework, comprised of three distinct mechanisms: Two out of the three mechanisms exploit contextual information with the aim of optimising the resource management and UE-RAT mapping, while the third mechanism acts with an augmenting role to the former two, by pre-processing the contextual information required by such, context-based mechanisms and –thus- by limiting the signalling cost required for communicating this contextual information among network entities. In addition to the three mechanisms, comprehensive analysis has taken place in relation to architectural aspects, in the context of the forthcoming 5G network architecture and by mapping them with the latest 5G network components –as these were introduced in the latest 3GPP work-. The first major contribution of this thesis is COmpAsS, a context-aware, multi-criteria RAT selection mechanism, the main part of which operates on the User Equipment (UE) side, minimizing signalling overhead over the air interface and computation load on the base stations. COmpAsS mechanism performs real-time monitoring and adopts Fuzzy Logic (FL) as one the core logic modules, responsible for the perception of the network situation and, in combination with a set of pre-defined rules, calculates a list of the most suitable available access network options. The merits of COmpAsS are showcased via an extensive series of simulation scenarios, as part of 5G ultra dense networks (UDN) use cases. The results prove how the proposed mechanism optimises Key Performance Indicators (KPIs), when juxtaposed to a well-established LTE handover algorithm. The second major contribution of the current thesis the Context Extraction and Profiling Engine (CEPE), a resource management framework, which analyzes user behavioral patterns, extracts meaningful knowledge and performs user profiling in order to apply it for optimal resource planning, as well as prediction of resource requirements. CEPE collects information about users, services, terminals and network conditions and –based on offline processing– derives a knowledge model, which is subsequently used for the optimization of the primary RRM mechanisms. Then, the extracted context information is translated into user profiles and is finally applied as input for enhanced cell (re)selection, handover or admission control. The viability and validity of CEPE is demonstrated via an extensive set of simulation scenarios. The third major contribution is CIP, a Context Information Pre-processing scheme, aiming to identify and discard redundant or unnecessary data during network signalling and before knowledge extraction. CIP could be considered as an integral part of the afore described profiling schemes, i.e. COmpAsS and CEPE. The module comprises aggregating and compressing mobile network-related context information per unique identifier, such as the end device’s International Mobile Subscriber Identity (IMSI), as well as techniques related to identifying and discarding user profile-redundant or unnecessary context data, before any transmission to CEPE. CIP gains are illustrated via a detailed analytical approach, guided by well-established 5G use case requirements. As a final major contribution of this thesis, a comprehensive analysis takes place with regard to the CEPE-COmpAsS interworking, in the context of the forthcoming 5G network architecture and by mapping them with the latest 5G network components –as these were introduced in the latest 3GPP work-. The work in this section shows how the proposed framework can be instantiated as part of the 5G network components and functions introduced in SDN-enabled environments, such as the Network Slicing approach, the Network Data Analytics and the Network Slice Selection Functions, towards further optimising the distribution and management of the available infrastructure and network resources among the UEs, as well as the Access Traffic Steering, Switching and Splitting (ATSSS), responsible for managing the UE data flows and mapping each single UE flow with the optimal available access technology.. Two supplementary studies are finally included in this dissertation: a preliminary analysis on traffic engineering policies based on user profiling realised by CEPE, as well as a 5G use case related to the Internet of Things domain -and more specifically, Precision Farming-, aiming to highlight explicit requirements such as mission-critical machine type communication

Journal of Telecommunications and Information Technology, 2018, nr 2

kwartalni

Enhanced connectivity in wireless mobile programmable networks

Mención Interancional en el título de doctorThe architecture of current operator infrastructures is being challenged by the non-stop growing demand of data hungry services appearing every day. While currently deployed operator networks have been able to cope with traffic demands so far, the architectures for the 5th generation of mobile networks (5G) are expected to support unprecedented traffic loads while decreasing costs associated with the network deployment and operations. Indeed, the forthcoming set of 5G standards will bring programmability and flexibility to levels never seen before. This has required introducing changes in the architecture of mobile networks, enabling different features such as the split of control and data planes, as required to support rapid programming of heterogeneous data planes. Network softwarisation is hence seen as a key enabler to cope with such network evolution, as it permits controlling all networking functions through (re)programming, thus providing higher flexibility to meet heterogeneous requirements while keeping deployment and operational costs low. A great diversity in terms of traffic patterns, multi-tenancy, heterogeneous and stringent traffic requirements is therefore expected in 5G networks. Software Defined Networking (SDN) and Network Function Virtualisation (NFV) have emerged as a basic tool-set for operators to manage their infrastructure with increased flexibility and reduced costs. As a result, new 5G services can now be envisioned and quickly programmed and provisioned in response to user and market necessities, imposing a paradigm shift in the services design. However, such flexibility requires the 5G transport network to undergo a profound transformation, evolving from a static connectivity substrate into a service-oriented infrastructure capable of accommodating the various 5G services, including Ultra-Reliable and Low Latency Communications (URLLC). Moreover, to achieve the desired flexibility and cost reduction, one promising approach is to leverage virtualisation technologies to dynamically host contents, services, and applications closer to the users so as to offload the core network and reduce the communication delay. This thesis tackles the above challengeswhicharedetailedinthefollowing. A common characteristic of the 5G servicesistheubiquityandthealmostpermanent connection that is required from the mobile network. This really imposes a challenge in thesignallingproceduresprovidedtogettrack of the users and to guarantee session continuity. The mobility management mechanisms will hence play a central role in the 5G networks because of the always-on connectivity demand. Distributed Mobility Management (DMM) helps going towards this direction, by flattening the network, hence improving its scalability,andenablinglocalaccesstotheInternet and other communication services, like mobile-edge clouds. Simultaneously, SDN opens up the possibility of running a multitude of intelligent and advanced applications for network optimisation purposes in a centralised network controller. The combination of DMM architectural principles with SDN management appears as a powerful tool for operators to cope with the management and data burden expected in 5G networks. To meet the future mobile user demand at a reduced cost, operators are also looking at solutions such as C-RAN and different functional splits to decrease the cost of deploying and maintaining cell sites. The increasing stress on mobile radio access performance in a context of declining revenues for operators is hence requiring the evolution of backhaul and fronthaul transport networks, which currently work decoupled. The heterogeneity of the nodes and transmisión technologies inter-connecting the fronthaul and backhaul segments makes the network quite complex, costly and inefficient to manage flexibly and dynamically. Indeed, the use of heterogeneous technologies forces operators to manage two physically separated networks, one for backhaul and one forfronthaul. In order to meet 5G requirements in a costeffective manner, a unified 5G transport network that unifies the data, control, and management planes is hence required. Such an integrated fronthaul/backhaul transport network, denoted as crosshaul, will hence carry both fronthaul and backhaul traffic operating over heterogeneous data plane technologies, which are software-controlled so as to adapt to the fluctuating capacity demand of the 5G air interfaces. Moreover, 5G transport networks will need to accommodate a wide spectrum of services on top of the same physical infrastructure. To that end, network slicing is seen as a suitable candidate for providing the necessary Quality of Service (QoS). Traffic differentiation is usually enforced at the border of the network in order to ensure a proper forwarding of the traffic according to its class through the backbone. With network slicing, the traffic may now traverse many slice edges where the traffic policy needs to be enforced, discriminated and ensured, according to the service and tenants needs. However, the very basic nature that makes this efficient management and operation possible in a flexible way – the logical centralisation – poses important challenges due to the lack of proper monitoring tools, suited for SDN-based architectures. In order to take timely and right decisions while operating a network, centralised intelligence applications need to be fed with a continuous stream of up-to-date network statistics. However, this is not feasible with current SDN solutions due to scalability and accuracy issues. Therefore, an adaptive telemetry system is required so as to support the diversity of 5G services and their stringent traffic requirements. The path towards 5G wireless networks alsopresentsacleartrendofcarryingoutcomputations close to end users. Indeed, pushing contents, applications, and network functios closer to end users is necessary to cope with thehugedatavolumeandlowlatencyrequired in future 5G networks. Edge and fog frameworks have emerged recently to address this challenge. Whilst the edge framework was more infrastructure-focused and more mobile operator-oriented, the fog was more pervasive and included any node (stationary or mobile), including terminal devices. By further utilising pervasive computational resources in proximity to users, edge and fog can be merged to construct a computing platform, which can also be used as a common stage for multiple radio access technologies (RATs) to share their information, hence opening a new dimension of multi-RAT integration.La arquitectura de las infraestructuras actuales de los operadores está siendo desafiada por la demanda creciente e incesante de servicios con un elevado consumo de datos que aparecen todos los días. Mientras que las redes de operadores implementadas actualmente han sido capaces de lidiar con las demandas de tráfico hasta ahora, se espera que las arquitecturas de la quinta generación de redes móviles (5G) soporten cargas de tráfico sin precedentes a la vez que disminuyen los costes asociados a la implementación y operaciones de la red. De hecho, el próximo conjunto de estándares 5G traerá la programabilidad y flexibilidad a niveles nunca antes vistos. Esto ha requerido la introducción de cambios en la arquitectura de las redes móviles, lo que permite diferentes funciones, como la división de los planos de control y de datos, según sea necesario para soportar una programación rápida de planos de datos heterogéneos. La softwarisación de red se considera una herramienta clave para hacer frente a dicha evolución de red, ya que proporciona la capacidad de controlar todas las funciones de red mediante (re)programación, proporcionando así una mayor flexibilidad para cumplir requisitos heterogéneos mientras se mantienen bajos los costes operativos y de implementación. Por lo tanto, se espera una gran diversidad en términos de patrones de tráfico, multi-tenancy, requisitos de tráfico heterogéneos y estrictos en las redes 5G. Software Defined Networking (SDN) y Network Function Virtualisation (NFV) se han convertido en un conjunto de herramientas básicas para que los operadores administren su infraestructura con mayor flexibilidad y menores costes. Como resultado, los nuevos servicios 5G ahora pueden planificarse, programarse y aprovisionarse rápidamente en respuesta a las necesidades de los usuarios y del mercado, imponiendo un cambio de paradigma en el diseño de los servicios. Sin embargo, dicha flexibilidad requiere que la red de transporte 5G experimente una transformación profunda, que evoluciona de un sustrato de conectividad estática a una infraestructura orientada a servicios capaz de acomodar los diversos servicios 5G, incluso Ultra-Reliable and Low Latency Communications (URLLC). Además, para lograr la flexibilidad y la reducción de costes deseadas, un enfoque prometedores aprovechar las tecnologías de virtualización para alojar dinámicamente los contenidos, servicios y aplicaciones más cerca de los usuarios para descargar la red central y reducir la latencia. Esta tesis aborda los desafíos anteriores que se detallan a continuación. Una característica común de los servicios 5G es la ubicuidad y la conexión casi permanente que se requiere para la red móvil. Esto impone un desafío en los procedimientos de señalización proporcionados para hacer un seguimiento de los usuarios y garantizar la continuidad de la sesión. Por lo tanto, los mecanismos de gestión de la movilidad desempeñarán un papel central en las redes 5G debido a la demanda de conectividad siempre activa. Distributed Mobility Management (DMM) ayuda a ir en esta dirección, al aplanar la red, lo que mejora su escalabilidad y permite el acceso local a Internet y a otros servicios de comunicaciones, como recursos en “nubes” situadas en el borde de la red móvil. Al mismo tiempo, SDN abre la posibilidad de ejecutar una multitud de aplicaciones inteligentes y avanzadas para optimizar la red en un controlador de red centralizado. La combinación de los principios arquitectónicos DMM con SDN aparece como una poderosa herramienta para que los operadores puedan hacer frente a la carga de administración y datos que se espera en las redes 5G. Para satisfacer la demanda futura de usuarios móviles a un coste reducido, los operadores también están buscando soluciones tales como C-RAN y diferentes divisiones funcionales para disminuir el coste de implementación y mantenimiento de emplazamientos celulares. El creciente estrés en el rendimiento del acceso a la radio móvil en un contexto de menores ingresos para los operadores requiere, por lo tanto, la evolución de las redes de transporte de backhaul y fronthaul, que actualmente funcionan disociadas. La heterogeneidad de los nodos y las tecnologías de transmisión que interconectan los segmentos de fronthaul y backhaul hacen que la red sea bastante compleja, costosa e ineficiente para gestionar de manera flexible y dinámica. De hecho, el uso de tecnologías heterogéneas obliga a los operadores a gestionar dos redes separadas físicamente, una para la red de backhaul y otra para el fronthaul. Para cumplir con los requisitos de 5G de manera rentable, se requiere una red de transporte única 5G que unifique los planos de control, datos y de gestión. Dicha red de transporte fronthaul/backhaul integrada, denominada “crosshaul”, transportará tráfico de fronthaul y backhaul operando sobre tecnologías heterogéneas de plano de datos, que están controladas por software para adaptarse a la demanda de capacidad fluctuante de las interfaces radio 5G. Además, las redes de transporte 5G necesitarán acomodar un amplio espectro de servicios sobre la misma infraestructura física y el network slicing se considera un candidato adecuado para proporcionar la calidad de servicio necesario. La diferenciación del tráfico generalmente se aplica en el borde de la red para garantizar un reenvío adecuado del tráfico según su clase a través de la red troncal. Con el networkslicing, el tráfico ahora puede atravesar muchos fronteras entre “network slices” donde la política de tráfico debe aplicarse, discriminarse y garantizarse, de acuerdo con las necesidades del servicio y de los usuarios. Sin embargo, el principio básico que hace posible esta gestión y operación eficientes de forma flexible – la centralización lógica – plantea importantes desafíos debido a la falta de herramientas de supervisión necesarias para las arquitecturas basadas en SDN. Para tomar decisiones oportunas y correctas mientras se opera una red, las aplicaciones de inteligencia centralizada necesitan alimentarse con un flujo continuo de estadísticas de red actualizadas. Sin embargo, esto no es factible con las soluciones SDN actuales debido a problemas de escalabilidad y falta de precisión. Por lo tanto, se requiere un sistema de telemetría adaptable para respaldar la diversidad de los servicios 5G y sus estrictos requisitos de tráfico. El camino hacia las redes inalámbricas 5G también presenta una tendencia clara de realizar acciones cerca de los usuarios finales. De hecho, acercar los contenidos, las aplicaciones y las funciones de red a los usuarios finales es necesario para hacer frente al enorme volumen de datos y la baja latencia requerida en las futuras redes 5G. Los paradigmas de “edge” y “fog” han surgido recientemente para abordar este desafío. Mientras que el edge está más centrado en la infraestructura y más orientado al operador móvil, el fog es más ubicuo e incluye cualquier nodo (fijo o móvil), incluidos los dispositivos finales. Al utilizar recursos de computación de propósito general en las proximidades de los usuarios, el edge y el fog pueden combinarse para construir una plataforma de computación, que también se puede utilizar para compartir información entre múltiples tecnologías de acceso radio (RAT) y, por lo tanto, abre una nueva dimensión de la integración multi-RAT.Programa Oficial de Doctorado en Ingeniería TelemáticaPresidente: Carla Fabiana Chiasserini.- Secretario: Vincenzo Mancuso.- Vocal: Diego Rafael López Garcí

Location-Based Sensor Fusion for UAS Urban Navigation.

For unmanned aircraft systems (UAS) to effectively conduct missions in urban environments, a multi-sensor navigation scheme must be developed that can operate in areas with degraded Global Positioning System (GPS) signals. This thesis proposes a sensor fusion plug and play capability for UAS navigation in urban environments to test combinations of sensors. Measurements are fused using both the Extended Kalman Filter (EKF) and Ensemble Kalman Filter (EnKF), a type of Particle Filter. A Long Term Evolution (LTE) transceiver and computer vision sensor each augment the traditional GPS receiver, inertial sensors, and air data system. Availability and accuracy information for each sensor is extracted from the literature. LTE positioning is motivated by a perpetually expanding network that can provide persistent measurements in the urban environment. A location-based logic model is proposed to predict sensor availability and accuracy for a given type of urban environment based on a map database as well as real-time sensor inputs and filter outputs. The simulation is executed in MATLAB where the vehicle dynamics, environment, sensors, and filters are user-customizable. Results indicate that UAS horizontal position accuracy is most dependent on availability of high sampling rate position measurements along with GPS measurement availability. Since the simulation is able to accept LTE sensor specifications, it will be able to show how the UAS position accuracy can be improved in the future with this persistent measurement, even though the accuracy is not improved using current LTE state-of-the-art. In the unmatched true propagation and filter dynamics model scenario, filter tuning proves to be difficult as GPS availability varies from urban canyon to urban canyon. The main contribution of this thesis is the generation of accuracy data for different sensor suites in both a homogeneous urban environment (solid walls) using matched dynamics models and a heterogeneous urban environment layout using unmatched models that necessitate filter tuning. Future work should explore the use of downward facing VISION sensors and LiDAR, integrate real-time map information into sensor availability and measurement weighting decisions, including the use of LTE for approximate localization, and more finely represent expected measurement accuracies in the GPS and LTE networks.PhDAerospace EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/110361/1/jrufa_1.pd

New models and patterns for traceability

Includes bibliographical references.Traceability is a critical software engineering practice that manages activities across the product development lifecycle. It is the discipline of getting an entire organisation to work together to build better quality products. Traceability is also about relationships between traceability items, the management of change and requires good communication between personnel on matters that impact the system in any way. At the start of the 21st Century it is evident that there was a proliferation in new traceability research promoting techniques from a number of emerging research communities. However, some researchers still report that there are still many problems, in particular the lack of empirical data from small, medium and large organisations. In this study we address this shortcoming by performing two empirical studies. Firstly, we carry out a four year case study investigating traceability in a large multinational that develops complex enterprise systems. Ericsson's is a world leader in the development of large telecom's systems and is renowned for their mature development processes, tools and highly skilled staff. We examine the state of the art at Ericsson and the factors that influence traceability, paying particular attention to how these factors change during the study and the impact that these changes have on the traceability practices. Secondly, we execute an industrial survey across nineteen corporations to further our understanding of traceability in small and medium sized organisations. Using this empirical data as the major design inputs, we design and test a Traceability Framework consisting of three solution components namely, a TRAceability Model (TRAM), a TRAceability Process (TRAP) and Traceability Patterns. The TRAceability Model (TRAM) consists of semantic models, designed using a layered approach, with each layer presenting traceability semantics from different user perspectives. The TRAceability Process (TRAP) consists of process models also utilising a layered approach but in this case capturing process elements that can be used in the creation of a traceability process in a variety of different contexts. At the lowest layer the models represent the actual traceability situation in a project at Ericsson. While patterns are a widely accepted method for describing best practices and recurring problems in many aspects of software development, they have not been applied to the field of traceability. Structural patterns emerged from the semantic and process models. Furthermore, we utilise a pre-defined pattern template for formalising the findings of the empirical data and communicating the outcomes to different users. The three components together promote better communication, reusability and understandability of traceability concepts and practices

Aspect oriented service composition for telecommunication applications

This PhD dissertation investigates how to overcome the negative effects of cross cutting concerns in the development of composite service applications. It proposes a combination of dynamic aspect oriented programming with a rules driven service composition mechanism. This combination allows very flexible utilization of aspects based on run-time data. The thesis contributes a join-point model and it integrates techniques for weaving and advice definition into the underlying composition language and execution engine. A particular focus of the thesis is telecommunication applications with their unique model for utilizing heterogeneous constituent services and their severe real-time requirements. Next to its primary use for modular implementation and flexible deployment of concerns in telecommunication applications, the dissertation discusses AOP as a feature for automated management and customization of service applications. The verification of the proposed solution contributes a detailed assessment of run-time performance, including a theoretical model of the AOP implementation. It allows predicting the performance of various alternative solutions. The proposed solution for combined AOP and service composition provides properties, which directly address challenges in pervasive computing and the Internet of things. Thus, this dissertation advances beyond the telecommunication domain with results applicable to various highly relevant technical developments