The OpenModelica integrated environment for modeling, simulation, and model-based development

OpenModelica is a unique large-scale integrated open-source Modelica- and FMI-based modeling, simulation, optimization, model-based analysis and development environment. Moreover, the OpenModelica environment provides a number of facilities such as debugging; optimization; visualization and 3D animation; web-based model editing and simulation; scripting from Modelica, Python, Julia, and Matlab; efficient simulation and co-simulation of FMI-based models; compilation for embedded systems; Modelica- UML integration; requirement verification; and generation of parallel code for multi-core architectures. The environment is based on the equation-based object-oriented Modelica language and currently uses the MetaModelica extended version of Modelica for its model compiler implementation. This overview paper gives an up-to-date description of the capabilities of the system, short overviews of used open source symbolic and numeric algorithms with pointers to published literature, tool integration aspects, some lessons learned, and the main vision behind its development.Fil: Fritzson, Peter. Linköping University; SueciaFil: Pop, Adrian. Linköping University; SueciaFil: Abdelhak, Karim. Fachhochschule Bielefeld; AlemaniaFil: Asghar, Adeel. Linköping University; SueciaFil: Bachmann, Bernhard. Fachhochschule Bielefeld; AlemaniaFil: Braun, Willi. Fachhochschule Bielefeld; AlemaniaFil: Bouskela, Daniel. Electricité de France; FranciaFil: Braun, Robert. Linköping University; SueciaFil: Buffoni, Lena. Linköping University; SueciaFil: Casella, Francesco. Politecnico di Milano; ItaliaFil: Castro, Rodrigo Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Investigación en Ciencias de la Computación. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Investigación en Ciencias de la Computación; ArgentinaFil: Franke, Rüdiger. Abb Group; AlemaniaFil: Fritzson, Dag. Linköping University; SueciaFil: Gebremedhin, Mahder. Linköping University; SueciaFil: Heuermann, Andreas. Linköping University; SueciaFil: Lie, Bernt. University of South-Eastern Norway; NoruegaFil: Mengist, Alachew. Linköping University; SueciaFil: Mikelsons, Lars. Linköping University; SueciaFil: Moudgalya, Kannan. Indian Institute Of Technology Bombay; IndiaFil: Ochel, Lennart. Linköping University; SueciaFil: Palanisamy, Arunkumar. Linköping University; SueciaFil: Ruge, Vitalij. Fachhochschule Bielefeld; AlemaniaFil: Schamai, Wladimir. Danfoss Power Solutions GmbH & Co; AlemaniaFil: Sjolund, Martin. Linköping University; SueciaFil: Thiele, Bernhard. Linköping University; SueciaFil: Tinnerholm, John. Linköping University; SueciaFil: Ostlund, Per. Linköping University; Sueci

Advanced modelling and simulation of water distribution systems with discontinuous control elements

Water distribution systems are large and complex structures. Hence, their construction, management and improvements are time consuming and expensive. But nearly all the optimisation methods, whether aimed at design or operation, suffer from the need for simulation models necessary to evaluate the performance of solutions to the problem. These simulation models, however, are increasing in size and complexity, and especially for operational control purposes, where there is a need to regularly update the control strategy to account for the fluctuations in demands, the combination of a hydraulic simulation model and optimisation is likely to be computationally excessive for all but the simplest of networks. The work presented in this thesis has been motivated by the need for reduced, whilst at the same time appropriately accurate, models to replicate the complex and nonlinear nature of water distribution systems in order to optimise their operation. This thesis attempts to establish the ground rules to form an underpinning basis for the formulation and subsequent evaluation of such models. Part I of this thesis introduces some of the modelling, simulation and optimisation problems currently faced by water industry. A case study is given to emphasise one particular subject, namely reduction of water distribution system models. A systematic research resulted in development of a new methodology which encapsulate not only the system mass balance but also the system energy distribution within the model reduction process. The methodology incorporates the energy audits concepts into the model reduction algorithm allowing the preservation of the original model energy distribution by imposing new pressure constraints in the reduced model. The appropriateness of the new methodology is illustrated on the theoretical and industrial case studies. Outcomes from these studies demonstrate that the new extension to the model reduction technique can simplify the inherent complexity of water networks while preserving the completeness of original information. An underlying premise which forms a common thread running through the thesis, linking Parts I and II, is in recognition of the need for the more efficient paradigm to model and simulate water networks; effectively accounting for the discontinuous behaviour exhibited by water network components. Motivated largely by the potential of contemplating a new paradigm to water distribution system modelling and simulation, a further major research area, which forms the basis of Part II, leads to a study of the discrete event specification formalism and quantised state systems to formulate a framework within which water distribution systems can be modelled and simulated. In contrast to the classic time-slicing simulators, depending on the numerical integration algorithms, the quantisation of system states would allow accounting for the discontinuities exhibited by control elements in a more efficient manner, and thereby, offer a significant increase in speed of the simulation of water network models. The proposed approach is evaluated on a number of case studies and compared with results obtained from the Epanet2 simulator and OpenModelica. Although the current state-of-art of the simulation tools utilising the quantised state systems do not allow to fully exploit their potential, the results from comparison demonstrate that, if the second or third order quantised-based integrations are used, the quantised state systems approach can outperform the conventional water network simulation methods in terms of simulation accuracy and run-time

EOOLT 2007 – Proceedings of the 1st International Workshop on Equation-Based Object-Oriented Languages and Tools

Computer aided modeling and simulation of complex systems, using components from multiple application domains, such as electrical, mechanical, hydraulic, control, etc., have in recent years witness0065d a significant growth of interest. In the last decade, novel equation-based object-oriented (EOO) modeling languages, (e.g. Mode- lica, gPROMS, and VHDL-AMS) based on acausal modeling using equations have appeared. Using such languages, it has become possible to model complex systems covering multiple application domains at a high level of abstraction through reusable model components. The interest in EOO languages and tools is rapidly growing in the industry because of their increasing importance in modeling, simulation, and specification of complex systems. There exist several different EOO language communities today that grew out of different application areas (multi-body system dynamics, electronic circuit simula- tion, chemical process engineering). The members of these disparate communities rarely talk to each other in spite of the similarities of their modeling and simulation needs. The EOOLT workshop series aims at bringing these different communities together to discuss their common needs and goals as well as the algorithms and tools that best support them. Despite the short deadlines and the fact that this is a new not very established workshop series, there was a good response to the call-for-papers. Thirteen papers and one presentation were accepted to the workshop program. All papers were subject to reviews by the program committee, and are present in these electronic proceedings. The workshop program started with a welcome and introduction to the area of equa- tion-based object-oriented languages, followed by paper presentations and discussion sessions after presentations of each set of related papers. On behalf of the program committee, the Program Chairmen would like to thank all those who submitted papers to EOOLT'2007. Special thanks go to David Broman who created the web page and helped with organization of the workshop. Many thanks to the program committee for reviewing the papers. EOOLT'2007 was hosted by the Technical University of Berlin, in conjunction with the ECOOP'2007 conference

Measurement-Based Monitoring and Control in Power Systems with High Renewable Penetrations

Power systems are experiencing rapid changes in their generation mixes because of the increasing integration of inverter-based resources (IBRs) and the retirement of traditional generations. This opens opportunities for a cleaner energy outlook but also poses challenges to the safe operation of the power networks. Enhanced monitoring and control based on the increasingly available measurements are essential in assisting stable operation and effective planning for these evolving systems. First, awareness of the evolving dynamic characteristics is quintessential for secure operation and corrective planning. A quantified monitoring study that keeps track of the inertial response and primary frequency response is conducted on the Eastern Interconnection (EI) for the past decade with field data. Whereas the inertia declined by at least 10%, the primary frequency response experienced an unexpected increase. The findings unveiled in the trending analysis also led to an improved event MW size estimation method, as well as discussions about regional dynamics. Experiencing a faster and deeper renewable integration, the Continental Europe Synchronous Area (CESA) system has been threatened by more frequent occurrences of inter-area oscillations during light-load high-renewable periods. A measurement-based oscillation damping control scheme is proposed for CESA with reduced reliance on system models. The design, implementation, and hardware-in-the-loop (HIL) testing of the controller are discussed in detail. Despite the challenges, the increasing presence of IBRs also brings opportunities for fast and efficient controls. Together with synchronized measurement, IBRs have the potential to flexibly complement traditional frequency and voltage control schemes for improved frequency and voltage recovery. The design, implementation, and HIL testing of the measurement-based frequency and voltage control for the New York State Grid are presented. In addition to the transmission level development, IBRs deployed in distribution networks can also be valuable assets in emergency islanding situations if controlled properly. A power management module is proposed to take advantage of measurements and automatically control the electric boundaries of islanded microgrids for maximized power utilization and improved frequency regulation. The module is designed to be adaptive to arbitrary non-meshed topologies with multiple source locations for increased flexibility, expedited deployment, and reduced cost

Languages and Tools for Optimization of Large-Scale Systems

Modeling and simulation are established techniques for solving design problems in a wide range of engineering disciplines today. Dedicated computer languages, such as Modelica, and efficient software tools are available. In this thesis, an extension of Modelica, Optimica, targeted at dynamic optimization of Modelica models is proposed. In order to demonstrate the Optimica extension, supporting software has been developed. This includes a modularly extensible Modelica compiler, the JModelica compiler, and an extension that supports also Optimica. A Modelica library for paper machine dryer section modeling, DryLib, has been developed. The classes in the library enable structured and hierarchical modeling of dryer sections at the application user level, while offering extensibility for the expert user. Based on DryLib, a parameter optimization problem, a model reduction problem, and an optimization-based control problem have been formulated and solved. A start-up optimization problem for a plate reactor has been formulated in Optimica, and solved by means of the Optimica compiler. In addition, the robustness properties of the start-up trajectories have been evaluated by means of Monte-Carlo simulation. In many control systems, it is necessary to consider interaction with a user. In this thesis, a manual control scheme for an unstable inverted pendulum system, where the inputs are bounded, is presented. The proposed controller is based on the notion of reachability sets and guarantees semi global stability for all references. An inverted pendulum on a two wheels robot has been developed. A distributed control system, including sensor processing algorithms and a stabilizing control scheme has been implemented on three on-board embedded processors

Modeling and Simulation Methodologies for Digital Twin in Industry 4.0

The concept of Industry 4.0 represents an innovative vision of what will be the factory of the future. The principles of this new paradigm are based on interoperability and data exchange between dierent industrial equipment. In this context, Cyber- Physical Systems (CPSs) cover one of the main roles in this revolution. The combination of models and the integration of real data coming from the field allows to obtain the virtual copy of the real plant, also called Digital Twin. The entire factory can be seen as a set of CPSs and the resulting system is also called Cyber-Physical Production System (CPPS). This CPPS represents the Digital Twin of the factory with which it would be possible analyze the real factory. The interoperability between the real industrial equipment and the Digital Twin allows to make predictions concerning the quality of the products. More in details, these analyses are related to the variability of production quality, prediction of the maintenance cycle, the accurate estimation of energy consumption and other extra-functional properties of the system. Several tools [2] allow to model a production line, considering dierent aspects of the factory (i.e. geometrical properties, the information flows etc.) However, these simulators do not provide natively any solution for the design integration of CPSs, making impossible to have precise analysis concerning the real factory. Furthermore, for the best of our knowledge, there are no solution regarding a clear integration of data coming from real equipment into CPS models that composes the entire production line. In this context, the goal of this thesis aims to define an unified methodology to design and simulate the Digital Twin of a plant, integrating data coming from real equipment. In detail, the presented methodologies focus mainly on: integration of heterogeneous models in production line simulators; Integration of heterogeneous models with ad-hoc simulation strategies; Multi-level simulation approach of CPS and integration of real data coming from sensors into models. All the presented contributions produce an environment that allows to perform simulation of the plant based not only on synthetic data, but also on real data coming from equipments

Artificial intelligence and model checking methods for in silico clinical trials

Model-based approaches to safety and efficacy assessment of pharmacological treatments (In Silico Clinical Trials, ISCT) hold the promise to decrease time and cost for the needed experimentations, reduce the need for animal and human testing, and enable personalised medicine, where treatments tailored for each single patient can be designed before being actually administered. Research in Virtual Physiological Human (VPH) is harvesting such promise by developing quantitative mechanistic models of patient physiology and drugs. Depending on many parameters, such models define physiological differences among different individuals and different reactions to drug administrations. Value assignments to model parameters can be regarded as Virtual Patients (VPs). Thus, as in vivo clinical trials test relevant drugs against suitable candidate patients, ISCT simulate effect of relevant drugs against VPs covering possible behaviours that might occur in vivo. Having a population of VPs representative of the whole spectrum of human patient behaviours is a key enabler of ISCT. However, VPH models of practical relevance are typically too complex to be solved analytically or to be formally analysed. Thus, they are usually solved numerically within simulators. In this setting, Artificial Intelligence and Model Checking methods are typically devised. Indeed, a VP coupled together with a pharmacological treatment represents a closed-loop model where the VP plays the role of a physical subsystem and the treatment strategy plays the role of the control software. Systems with this structure are known as Cyber-Physical Systems (CPSs). Thus, simulation-based methodologies for CPSs can be employed within personalised medicine in order to compute representative VP populations and to conduct ISCT. In this thesis, we advance the state of the art of simulation-based Artificial Intelligence and Model Checking methods for ISCT in the following directions. First, we present a Statistical Model Checking (SMC) methodology based on hypothesis testing that, given a VPH model as input, computes a population of VPs which is representative (i.e., large enough to represent all relevant phenotypes, with a given degree of statistical confidence) and stratified (i.e., organised as a multi-layer hierarchy of homogeneous sub-groups). Stratification allows ISCT to adaptively focus on specific phenotypes, also supporting prioritisation of patient sub-groups in follow-up in vivo clinical trials. Second, resting on a representative VP population, we design an ISCT aiming at optimising a complex treatment for a patient digital twin, that is the virtual counterpart of that patient physiology defined by means of a set of VPs. Our ISCT employs an intelligent search driving a VPH model simulator to seek the lightest but still effective treatment for the input patient digital twin. Third, to enable interoperability among VPH models defined with different modelling and simulation environments and to increase efficiency of our ISCT, we also design an optimised simulator driver to speed-up backtracking-based search algorithms driving simulators. Finally, we evaluate the effectiveness of our presented methodologies on state-of-the-art use cases and validate our results on retrospective clinical data

Proceedings of the 2nd Annual SMACC Research Seminar 2017

The Annual SMACC Research Seminar is a forum for researchers from VTT Technical Research Centre of Finland Ltd, Tampere University of Technology (TUT) and industry to present their research in the area of smart machines and manufacturing. The 2nd seminar is held in 7th of November 2017 in Tampere, Finland. The objective of the seminar is to publish results of the research to wider audiences and to offer researchers a forum to discuss their research and to find common research interests and new research ideas. Smart Machines and Manufacturing Competence Centre - SMACC is joint strategic alliance of VTT Ltd and TUT in the area of intelligent machines and manufacturing. SMACC offers unique services for SME`s in the field of machinery and manufacturing - key features are rapid solutions, cutting-edge research expertise and extensive partnership networks. SMACC is promoting digitalization in mechanical engineering and making scientific research with domestic and international partners in several different topics (www.smacc.fi)