Goal-seeking Behavior-based Mobile Robot Using Particle Swarm Fuzzy Controller

Behavior-based control architecture has successfully demonstrated their competence in mobile robot development. Fuzzy logic system characteristics are suitable to address the behavior design problems. However, there are difficulties encountered when setting fuzzy parameters manually. Therefore, most of the works in the field generate certain interest for the study of fuzzy systems with added learning capabilities. This paper presents the development of fuzzy behavior-based control architecture using Particle Swarm Optimization (PSO). A goal-seeking behaviors based on Particle Swarm Fuzzy Controller (PSFC) are developed using the modified PSO with two stages of the PSFC process. Several simulations and experiments with MagellanPro mobile robot have been performed to analyze the performance of the algorithm.  The promising results have proved that the proposed control architecture for mobile robot has better capability to accomplish useful task in real office-like environment

Deictic primitives for general purpose navigation

A visually-based deictic primative used as an elementary command set for general purpose navigation was investigated. It was shown that a simple 'follow your eyes' scenario is sufficient for tracking a moving target. Limitations of velocity, acceleration, and modeling of the response of the mechanical systems were enforced. Realistic paths of the robots were produced during the simulation. Scientists could remotely command a planetary rover to go to a particular rock formation that may be interesting. Similarly an expert at plant maintenance could obtain diagnostic information remotely by using deictic primitives on a mobile are used in the deictic primitives, we could imagine that the exact same control software could be used for all of these applications

VFH+ based shared control for remotely operated mobile robots

This paper addresses the problem of safe and efficient navigation in remotely controlled robots operating in hazardous and unstructured environments; or conducting other remote robotic tasks. A shared control method is presented which blends the commands from a VFH+ obstacle avoidance navigation module with the teleoperation commands provided by an operator via a joypad. The presented approach offers several advantages such as flexibility allowing for a straightforward adaptation of the controller's behaviour and easy integration with variable autonomy systems; as well as the ability to cope with dynamic environments. The advantages of the presented controller are demonstrated by an experimental evaluation in a disaster response scenario. More specifically, presented evidence show a clear performance increase in terms of safety and task completion time compared to a pure teleoperation approach, as well as an ability to cope with previously unobserved obstacles.Comment: 8 pages,6 figure

Trust-Based Control of (Semi)Autonomous Mobile Robotic Systems

Despite great achievements made in (semi)autonomous robotic systems, human participa-tion is still an essential part, especially for decision-making about the autonomy allocation of robots in complex and uncertain environments. However, human decisions may not be optimal due to limited cognitive capacities and subjective human factors. In human-robot interaction (HRI), trust is a major factor that determines humans use of autonomy. Over/under trust may lead to dispro-portionate autonomy allocation, resulting in decreased task performance and/or increased human workload. In this work, we develop automated decision-making aids utilizing computational trust models to help human operators achieve a more effective and unbiased allocation. Our proposed decision aids resemble the way that humans make an autonomy allocation decision, however, are unbiased and aim to reduce human workload, improve the overall performance, and result in higher acceptance by a human. We consider two types of autonomy control schemes for (semi)autonomous mobile robotic systems. The first type is a two-level control scheme which includes switches between either manual or autonomous control modes. For this type, we propose automated decision aids via a computational trust and self-confidence model. We provide analytical tools to investigate the steady-state effects of the proposed autonomy allocation scheme on robot performance and human workload. We also develop an autonomous decision pattern correction algorithm using a nonlinear model predictive control to help the human gradually adapt to a better allocation pattern. The second type is a mixed-initiative bilateral teleoperation control scheme which requires mixing of autonomous and manual control. For this type, we utilize computational two-way trust models. Here, mixed-initiative is enabled by scaling the manual and autonomous control inputs with a function of computational human-to-robot trust. The haptic force feedback cue sent by the robot is dynamically scaled with a function of computational robot-to-human trust to reduce humans physical workload. Using the proposed control schemes, our human-in-the-loop tests show that the trust-based automated decision aids generally improve the overall robot performance and reduce the operator workload compared to a manual allocation scheme. The proposed decision aids are also generally preferred and trusted by the participants. Finally, the trust-based control schemes are extended to the single-operator-multi-robot applications. A theoretical control framework is developed for these applications and the stability and convergence issues under the switching scheme between different robots are addressed via passivity based measures

An Integrated Decision Making Approach for Adaptive Shared Control of Mobility Assistance Robots

© 2016, Springer Science+Business Media Dordrecht. Mobility assistance robots provide support to elderly or patients during walking. The design of a safe and intuitive assistance behavior is one of the major challenges in this context. We present an integrated approach for the context-specific, on-line adaptation of the assistance level of a rollator-type mobility assistance robot by gain-scheduling of low-level robot control parameters. A human-inspired decision-making model, the drift-diffusion Model, is introduced as the key principle to gain-schedule parameters and with this to adapt the provided robot assistance in order to achieve a human-like assistive behavior. The mobility assistance robot is designed to provide (a) cognitive assistance to help the user following a desired path towards a predefined destination as well as (b) sensorial assistance to avoid collisions with obstacles while allowing for an intentional approach of them. Further, the robot observes the user long-term performance and fatigue to adapt the overall level of (c) physical assistance provided. For each type of assistance a decision-making problem is formulated that affects different low-level control parameters. The effectiveness of the proposed approach is demonstrated in technical validation experiments. Moreover, the proposed approach is evaluated in a user study with 35 elderly persons. Obtained results indicate that the proposed gain-scheduling technique incorporating ideas of human decision-making models shows a general high potential for the application in adaptive shared control of mobility assistance robots

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 370)

This bibliography lists 219 reports, articles and other documents introduced into the NASA Scientific and Technical Information System during Dec. 1992. Subject coverage includes: aerospace medicine and physiology, life support systems and man/system technology, protective clothing, exobiology and extraterrestrial life, planetary biology, and flight crew behavior and performance

Migration from Teleoperation to Autonomy via Modular Sensor and Mobility Bricks

In this thesis, the teleoperated communications of a Remotec ANDROS robot have been reverse engineered. This research has used the information acquired through the reverse engineering process to enhance the teleoperation and add intelligence to the initially automated robot. The main contribution of this thesis is the implementation of the mobility brick paradigm, which enables autonomous operations, using the commercial teleoperated ANDROS platform. The brick paradigm is a generalized architecture for a modular approach to robotics. This architecture and the contribution of this thesis are a paradigm shift from the proprietary commercial models that exist today. The modular system of sensor bricks integrates the transformed mobility platform and defines it as a mobility brick. In the wall following application implemented in this work, the mobile robotic system acquires intelligence using the range sensor brick. This application illustrates a way to alleviate the burden on the human operator and delegate certain tasks to the robot. Wall following is one among several examples of giving a degree of autonomy to an essentially teleoperated robot through the Sensor Brick System. Indeed once the proprietary robot has been altered into a mobility brick; the possibilities for autonomy are numerous and vary with different sensor bricks. The autonomous system implemented is not a fixed-application robot but rather a non-specific autonomy capable platform. Meanwhile the native controller and the computer-interfaced teleoperation are still available when necessary. Rather than trading off by switching from teleoperation to autonomy, this system provides the flexibility to switch between the two at the operator’s command. The contributions of this thesis reside in the reverse engineering of the original robot, its upgrade to a computer-interfaced teleoperated system, the mobility brick paradigm and the addition of autonomy capabilities. The application of a robot autonomously following a wall is subsequently implemented, tested and analyzed in this work. The analysis provides the programmer with information on controlling the robot and launching the autonomous function. The results are conclusive and open up the possibilities for a variety of autonomous applications for mobility platforms using modular sensor bricks

Telerobotic Sensor-based Tool Control Derived From Behavior-based Robotics Concepts

@font-face { font-family: TimesNewRoman ; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0in 0in 0.0001pt; font-size: 12pt; font-family: Times New Roman ; }div.Section1 { page: Section1; } Teleoperated task execution for hazardous environments is slow and requires highly skilled operators. Attempts to implement telerobotic assists to improve efficiency have been demonstrated in constrained laboratory environments but are not being used in the field because they are not appropriate for use on actual remote systems operating in complex unstructured environments using typical operators. This work describes a methodology for combining select concepts from behavior-based systems with telerobotic tool control in a way that is compatible with existing manipulator architectures used by remote systems typical to operations in hazardous environment. The purpose of the approach is to minimize the task instance modeling in favor of a priori task type models while using sensor information to register the task type model to the task instance. The concept was demonstrated for two tools useful to decontamination & dismantlement type operations—a reciprocating saw and a powered socket tool. The experimental results demonstrated that the approach works to facilitate traded control telerobotic tooling execution by enabling difficult tasks and by limiting tool damage. The role of the tools and tasks as drivers to the telerobotic implementation was better understood in the need for thorough task decomposition and the discovery and examination of the tool process signature. The contributions of this work include: (1) the exploration and evaluation of select features of behavior-based robotics to create a new methodology for integrating telerobotic tool control with positional teleoperation in the execution of complex tool-centric remote tasks, (2) the simplification of task decomposition and the implementation of sensor-based tool control in such a way that eliminates the need for the creation of a task instance model for telerobotic task execution, and (3) the discovery, demonstrated use, and documentation of characteristic tool process signatures that have general value in the investigation of other tool control, tool maintenance, and tool development strategies above and beyond the benefit sustained for the methodology described in this work

Fuzzy logic control of automated guided vehicle

This thesis describes the fuzzy logic based control system for an automated guided vehicle ( AGV ) designed to navigate from one position and orientation to another while avoiding obstacles. A vehicle with an onboard computer system and a beacon based location system has been used to provide experimental confirmation of the methods proposed during this research. A simulation package has been written and used to test control techniques designed for the vehicle. A series of navigation rules based upon the vehicle's current position relative to its goal produce a fuzzy fit vector, the entries in which represent the relative importance of sets defined over all the possible output steering angles. This fuzzy fit vector is operated on by a new technique called rule spreading which ensures that all possible outputs have some activation. An obstacle avoidance controller operates from information about obstacles near to the vehicle. A method has been devised for generating obstacle avoidance sets depending on the size, shape and steering mechanism of a vehicle to enable their definition to accurately reflect the geometry and dynamic performance of the vehicle. Using a set of inhibitive rules the obstacle avoidance system compiles a mask vector which indicates the potential for a collision if each one of the possible output sets is chosen. The fuzzy fit vector is multiplied with the mask vector to produce a combined fit vector representing the relative importance of the output sets considering the demands of both navigation and obstacle avoidance. This is operated on by a newly developed windowing technique which prevents any conflicts produced by this combination leading to an undesirable output. The final fit vector is then defuzzified to give a demand steering angle for the vehicle. A separate fuzzy controller produces a demand velocity. In tests carried out in simulation and on the research vehicle it has been shown that the control system provides a successful guidance and obstacle avoidance scheme for an automated vehicle

Intelligent assist device

In an Intelligent Assist Device (IAD), the human operator is assisted by the power of the servo drives as well as intelligence from this device. Because of the power actuation, the ergonomic injury of the operator using the device can be reduced. A force transducer provides a convenient way for the operator to generate control command by a simple push to move intuition. Therefore, there is minimum required training for using an IAD. Collision of payload with obstacles has always been a major problem in using a lift assist device. Collision might cause damage to the work piece, lift device and sometimes result in operator injury. All these occurrences will significantly increase the total production cost. In this work, a modified collision-avoidance scheme has been proposed, and it has been proven stable both analytically and experimentally. An artificial attractive well is also explored in this research to guide an operator to approach a target along a preferred path. Stability proof is provided and experimental results are given