Efficient processor management strategies for multicomputer systems

Multicomputers are cost-effective alternatives to the conventional supercomputers. Contemporary processor management schemes tend to underutilize the processors and leave many of the processors in the system idle while jobs are waiting for execution;Instead of designing faster processors or interconnection networks, a substantial performance improvement can be obtained by implementing better processor management strategies. This dissertation studies the performance issues related to the processor management schemes and proposes several ways to enhance the multicomputer systems by means of processor management. The proposed schemes incorporate the concepts of size-reduction, non-contiguous allocation, as well as job migration. Job scheduling using a bypass-queue is also studied. All the proposed schemes are proven effective in improving the system performance via extensive simulations. Each proposed scheme has different implementation cost and constraints. In order to take advantage of these schemes, judicious selection of system parameters is important and is discussed

Design and performance evaluation of migration-based submesh allocation strategies in mesh multicomputers

Master'sMASTER OF ENGINEERIN

Performance analysis of wormhole routing in multicomputer interconnection networks

Perhaps the most critical component in determining the ultimate performance potential of a multicomputer is its interconnection network, the hardware fabric supporting communication among individual processors. The message latency and throughput of such a network are affected by many factors of which topology, switching method, routing algorithm and traffic load are the most significant. In this context, the present study focuses on a performance analysis of k-ary n-cube networks employing wormhole switching, virtual channels and adaptive routing, a scenario of especial interest to current research. This project aims to build upon earlier work in two main ways: constructing new analytical models for k-ary n-cubes, and comparing the performance merits of cubes of different dimensionality. To this end, some important topological properties of k-ary n-cubes are explored initially; in particular, expressions are derived to calculate the number of nodes at/within a given distance from a chosen centre. These results are important in their own right but their primary significance here is to assist in the construction of new and more realistic analytical models of wormhole-routed k-ary n-cubes. An accurate analytical model for wormhole-routed k-ary n-cubes with adaptive routing and uniform traffic is then developed, incorporating the use of virtual channels and the effect of locality in the traffic pattern. New models are constructed for wormhole k-ary n-cubes, with the ability to simulate behaviour under adaptive routing and non-uniform communication workloads, such as hotspot traffic, matrix-transpose and digit-reversal permutation patterns. The models are equally applicable to unidirectional and bidirectional k-ary n-cubes and are significantly more realistic than any in use up to now. With this level of accuracy, the effect of each important network parameter on the overall network performance can be investigated in a more comprehensive manner than before. Finally, k-ary n-cubes of different dimensionality are compared using the new models. The comparison takes account of various traffic patterns and implementation costs, using both pin-out and bisection bandwidth as metrics. Networks with both normal and pipelined channels are considered. While previous similar studies have only taken account of network channel costs, our model incorporates router costs as well thus generating more realistic results. In fact the results of this work differ markedly from those yielded by earlier studies which assumed deterministic routing and uniform traffic, illustrating the importance of using accurate models to conduct such analyses

Performance analysis of wormhole switched interconnection networks with virtual channels and finite buffers

An efficient interconnection network that provides high bandwidth and low latency interprocessor communication is critical to harness fully the computational power of large scale multicomputer. K-ary n-cube networks have been widely adopted in contemporary multicomputers due to their desirable properties. As such, the present study focuses on a performance analysis of K-ary n-cubes employing wormhole switching, virtual channels, and adaptive routing. The objective of this dissertation is twofold: to examine the performance of these networks, and to compare the performance merits of various topologies under different working conditions, by means of analytical modelling. Most existing analytical models reported in the literature have used a method originally proposed by Dally to capture the effects of virtual channels on network performance. This method is based on a Markov chain and it has been shown that its prediction accuracy degrades as traffic increases. Moreover, these studies have also constrained the buffer capacity to a single flit per channel, a simplifying assumption that has often been invoked to ease the derivation of the analytical models. Motivated by these observations, the first part of this research proposes a new method for modelling virtual channels, based on an M/G/1 queue. Owing to the generality of this method. Daily's method is shown to be a special case when the message service time is exponentially distributed. The second part of this research uses theoretical results of queuing systems to relax the single-flit buffer assumption. New analytical models are then proposed to capture the effects of deploying arbitrary size buffers on the performance of deterministic and adaptive routing algorithms. Simulation experiments reveal that results from the proposed analytical models are in close agreement with those obtained through simulation. Building on these new analytical models, the third part of this research compares the relative performance merits of K-ary n-cubes under different operating conditions, in the presence of finite size buffers and multiple virtual channels. Namely, the analysis first revisits the relative performance merits of the well-known 2D torus, 3D torus and hypercube under different implementation constraints. The analysis has then been extended to investigate the performance impact of arranging the total buffer space, allocated to a physical channel, into multiple virtual channels. Finally, the performance of adaptive routing has been compared to that of deterministic routing. While previous similar studies have only taken account of channel and router costs, the present analysis incorporates different intra-router delays, as well, and thus generates more realistic results. In fact, the results of this research differ notably from those reported in previous studies, illustrating the sensitivity of such studies to the level of detail, degree of accuracy and the realism of the assumptions adopted

Topology Agnostic Methods for Routing, Reconfiguration and Virtualization of Interconnection Networks

Modern computing systems, such as supercomputers, data centers and multicore chips, generally require efficient communication between their different system units; tolerance towards component faults; flexibility to expand or merge; and a high utilization of their resources. Interconnection networks are used in a variety of such computing systems in order to enable communication between their diverse system units. Investigation and proposal of new or improved solutions to topology agnostic routing and reconfiguration of interconnection networks are main objectives of this thesis. In addition, topology agnostic routing and reconfiguration algorithms are utilized in the development of new and flexible approaches to processor allocation. The thesis aims to present versatile solutions that can be used for the interconnection networks of a number of different computing systems. No particular routing algorithm was specified for an interconnection network technology which is now incorporated in Dolphin Express. The thesis states a set of criteria for a suitable routing algorithm, evaluates a number of existing routing algorithms, and recommend that one of the algorithms – which fulfils all of the criteria – is used. Further investigations demonstrate how this routing algorithm inherently supports fault-tolerance, and how it can be optimized for some network topologies. These considerations are also relevant for the InfiniBand interconnection network technology. Reconfiguration of interconnection networks (change of routing function) is a deadlock prone process. Some existing reconfiguration strategies include deadlock avoidance mechanisms that significantly reduce the network service offered to running applications. The thesis expands the area of application for one of the most versatile and efficient reconfiguration algorithms available in the literature, and proposes an optimization of this algorithm that improves the network service offered to running applications. Moreover, a new reconfiguration algorithm is presented that supports a replacement of the routing function without causing performance penalties. Processor allocation strategies that guarantee traffic-containment commonly pose strict requirements on the shape of partitions, and thus achieve only a limited utilization of a system’s computing resources. The thesis introduces two new approaches that are more flexible. Both approaches utilize the properties of a topology agnostic routing algorithm in order to enforce traffic-containment within arbitrarily shaped partitions. Consequently, a high resource utilization as well as isolation of traffic between different partitions is achieved

Efficient mechanisms to provide fault tolerance in interconnection networks for pc clusters

Actualmente, los clusters de PC son un alternativa rentable a los computadores paralelos. En estos sistemas, miles de componentes (procesadores y/o discos duros) se conectan a través de redes de interconexión de altas prestaciones. Entre las tecnologías de red actualmente disponibles para construir clusters, InfiniBand (IBA) ha emergido como un nuevo estándar de interconexión para clusters. De hecho, ha sido adoptado por muchos de los sistemas más potentes construidos actualmente (lista top500). A medida que el número de nodos aumenta en estos sistemas, la red de interconexión también crece. Junto con el aumento del número de componentes la probabilidad de averías aumenta dramáticamente, y así, la tolerancia a fallos en el sistema en general, y de la red de interconexión en particular, se convierte en una necesidad. Desafortunadamente, la mayor parte de las estrategias de encaminamiento tolerantes a fallos propuestas para los computadores masivamente paralelos no pueden ser aplicadas porque el encaminamiento y las transiciones de canal virtual son deterministas en IBA, lo que impide que los paquetes eviten los fallos. Por lo tanto, son necesarias nuevas estrategias para tolerar fallos. Por ello, esta tesis se centra en proporcionar los niveles adecuados de tolerancia a fallos a los clusters de PC, y en particular a las redes IBA. En esta tesis proponemos y evaluamos varios mecanismos adecuados para las redes de interconexión para clusters. El primer mecanismo para proporcionar tolerancia a fallos en IBA (al que nos referimos como encaminamiento tolerante a fallos basado en transiciones; TFTR) consiste en usar varias rutas disjuntas entre cada par de nodos origen-destino y seleccionar la ruta apropiada en el nodo fuente usando el mecanismo APM proporcionado por IBA. Consiste en migrar las rutas afectadas por el fallo a las rutas alternativas sin fallos. Sin embargo, con este fin, es necesario un algoritmo eficiente de encaminamiento capaz de proporcionar suficientesMontañana Aliaga, JM. (2008). Efficient mechanisms to provide fault tolerance in interconnection networks for pc clusters [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/2603Palanci

Predictive and distributed routing balancing (PR-DRB) : high speed interconnection networks

Current parallel applications running on clusters require the use of an interconnection network to perform communications among all computing nodes available. Imbalance of communications can produce network congestion, reducing throughput and increasing latency, degrading the overall system performance. On the other hand, parallel applications running on these networks posses representative stages which allow their characterization, as well as repetitive behavior that can be identified on the basis of this characterization. This work presents the Predictive and Distributed Routing Balancing (PR-DRB), a new method developed to gradually control network congestion, based on paths expansion, traffic distribution and effective traffic load, in order to maintain low latency values. PR-DRB monitors messages latencies on intermediate routers, makes decisions about alternative paths and record communication pattern information encountered during congestion situation. Based on the concept of applications repetitiveness, best solution recorded are reapplied when saved communication pattern re-appears. Traffic congestion experiments were conducted in order to evaluate the performance of the method, and improvements were observed.Les aplicacions paral·leles actuals en els Clústers requereixen l'ús d'una xarxa d'interconnexió per comunicar a tots els nodes de còmput disponibles. El desequilibri en la càrrega de comunicacions pot congestionar la xarxa, incrementant la latència i disminuint el throughput, degradant el rendiment total del sistema. D'altra banda, les aplicacions paral·leles que s'executen sobre aquestes xarxes contenen etapes representatives durant la seva execució les quals permeten caracteritzar-les, a més d'extraure un comportament repetitiu que pot ser identificat en base a aquesta caracterització. Aquest treball presenta el Balanceig Predictiu de Encaminament Distribuït (PR-DRB), un nou mètode desenvolupat per controlar la congestió a la xarxa en forma gradual, basat en l'expansió de camins, la distribució de trànsit i càrrega efectiva actual per tal de mantenir una latència baixa. PR-DRB monitoritza la latència dels missatges en els encaminadors, pren decisions sobre els camins alternatius a utilitzar i registra la informació de la congestió sobre la base del patró de comunicacions detectat, utilitzant com a concepte base la repetitivitat de les aplicacions per després tornar a aplicar la millor solució quan aquest patró es repeteixi. Experiments de trànsit amb congestió van ser portats a terme per avaluar el rendiment del mètode, els quals van mostrar la bondat del mateix.Las aplicaciones paralelas actuales en los Clústeres requieren el uso de una red de interconexión para comunicar a todos los nodos de cómputo disponibles. El desbalance en la carga de comunicaciones puede congestionar la red, incrementando la latencia y disminuyendo el throughput, degradando el rendimiento total del sistema. Por otro lado, las aplicaciones paralelas que corren sobre estas redes contienen etapas representativas durante su ejecución las cuales permiten caracterizarlas, además de un comportamiento repetitivo que puede ser identificado en base a dicha caracterización. Este trabajo presenta el Balanceo Predictivo de Encaminamiento Distribuido (PR-DRB), un nuevo método desarrollado para controlar la congestión en la red en forma gradual; basado en la expansión de caminos, la distribución de tráfico y carga efectiva actual, a fin de mantener una latencia baja. PR-DRB monitorea la latencia de los mensajes en los encaminadores, toma decisiones sobre los caminos alternativos a utilizar y registra la información de la congestión en base al patrón de comunicaciones detectado, usando como concepto base la repetitividad de las aplicaciones para luego volver a aplicar la mejor solución cuando dicho patrón se repita. Experimentos de tráfico con congestión fueron llevados a cabo para evaluar el rendimiento del método, los cuales mostraron la bondad del mismo

Scheduled routing for the NuMesh

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1994.Includes bibliographical references (leaves 66-68).by Milan Singh Minsky.M.S

Off-chip Communications Architectures For High Throughput Network Processors

In this work, we present off-chip communications architectures for line cards to increase the throughput of the currently used memory system. In recent years there is a significant increase in memory bandwidth demand on line cards as a result of higher line rates, an increase in deep packet inspection operations and an unstoppable expansion in lookup tables. As line-rate data and NPU processing power increase, memory access time becomes the main system bottleneck during data store/retrieve operations. The growing demand for memory bandwidth contrasts the notion of indirect interconnect methodologies. Moreover, solutions to the memory bandwidth bottleneck are limited by physical constraints such as area and NPU I/O pins. Therefore, indirect interconnects are replaced with direct, packet-based networks such as mesh, torus or k-ary n-cubes. We investigate multiple k-ary n-cube based interconnects and propose two variations of 2-ary 3-cube interconnect called the 3D-bus and 3D-mesh. All of the k-ary n-cube interconnects include multiple, highly efficient techniques to route, switch, and control packet flows in order to minimize congestion spots and packet loss. We explore the tradeoffs between implementation constraints and performance. We also developed an event-driven, interconnect simulation framework to evaluate the performance of packet-based off-chip k-ary n-cube interconnect architectures for line cards. The simulator uses the state-of-the-art software design techniques to provide the user with a flexible yet robust tool, that can emulate multiple interconnect architectures under non-uniform traffic patterns. Moreover, the simulator offers the user with full control over network parameters, performance enhancing features and simulation time frames that make the platform as identical as possible to the real line card physical and functional properties. By using our network simulator, we reveal the best processor-memory configuration, out of multiple configurations, that achieves optimal performance. Moreover, we explore how network enhancement techniques such as virtual channels and sub-channeling improve network latency and throughput. Our performance results show that k-ary n-cube topologies, and especially our modified version of 2-ary 3-cube interconnect - the 3D-mesh, significantly outperform existing line card interconnects and are able to sustain higher traffic loads. The flow control mechanism proved to extensively reduce hot-spots, load-balance areas of high traffic rate and achieve low transmission failure rate. Moreover, it can scale to adopt more memories and/or processors and as a result to increase the line card\u27s processing power

Cherub: A hardware distributed single shared address space memory architecture

Increased computer throughput can be achieved through the use of parallel processing. The granularity of a parallel program is the average number of instructions performed by the tasks constituting it. Coarse-grained programs typically execute huge numbers of instructions per task (w 105). The tasks in fine-grained programs are typically short (æ 103). In general, the finer the program grain, the greater the potential for exploiting parallelism. Amdahl’s Law shows that in the absence of overheads, the more potential parallelism that is realised in an algorithm, the faster it will be. The economical granularity of tasks is determined by the intertask communications overhead. Break-even occurs when processing is approximately equally divided between useful work and overhead. The two common parallel programming paradigms are shared variable and message passing. Shared variable is, in general, the more natural of the two as it allows implicit communication between tasks. This encourages the programmer to make use of fine-grained tasks. The message passing paradigm requires explicit communication between tasks. This encourages the programmer to use coarser-grained tasks. Two kinds of parallel architecture have become established. The first is the multiprocessor, which is built around a shared bus giving broadcast communications and a shared memory. This is characterised by low communications overhead, but limited scalability. The second is the multicomputer, which is based on point-to-point communications with larger communications overhead, but good scalability. Quantitatively, the low overhead of the multiprocessor is well matched to fine-grain tasks and, hence, to supporting the shared variable paradigm, while the high overhead of the multicomputer matches it to coarse-grain parallelism and, hence, to the message passing paradigm. Currently, there appears to be no middle ground in parallel computing; an architecture which can support both several hundred medium-grained (« 104 instructions) parallel tasks and the shared variable programming paradigm would be advantageous in many applications. This thesis asserts that it is possible to implement a new computer architecture, Cherub, which has at least 200 processors and is able to support shared variable programming with an optimal task granularity of around 104 instructions. This can be achieved through the combination of a hardware-based distributed shared single address space and a wafer-scale communications network. To support the thesis, the dissertation first specifies a programmer’s interface to Cherub which is simple enough to implement in hardware. It then designs algorithms which provide this interface, allowing the requirements of the underlying network to be estimated. Finally, a wafer scale communications network is outlined, and simulations are used to demonstrate that it can provide the performance required to successfully implement Cherub