Melanopsin Sensitivity in the Human Visual System

The human retina contains long [L]-wavelength, medium [M]-wavelength, and short [S]-wavelength cones, rods, and intrinsically photosensitive retinal ganglion cells expressing the blue-sensitive (λmax = ~480 nm) photopigment melanopsin. Previous animal studies have pointed to a role of melanopsin in advancing circadian phase, melatonin suppression, the pupillary light reflex (PLR), light avoidance, and brightness discrimination, often relying on genetic tools to study melanopsin in isolation in animal models. This work addresses the question of human melanopsin sensitivity and function in vivo using a spectrally tunable light source and the method of silent substitution, allowing for the selective stimulation of melanopsin in the human retina, in combination of pupillometry, psychophysics, and BOLD functional neuroimaging (fMRI). In three studies, we find (1) that the temporal transfer function of melanopsin in controlling the pupil in humans is low-pass, peaking at slow temporal frequencies (0.01 Hz), with a sharp drop off at higher frequencies (1-2 Hz); (2) that signals originating from S cones get combined in an antagonistic fashion with melanopsin signals and signals from L and M cones cones, demonstrating spectral opponency in the control of the human PLR; (3) that nominally cone-silent melanopsin-directed spectral modulations stimulate cones in the partial shadow of the retinal blood vessels (termed penumbral cones), leading to the entoptic percept of the subjective retinal vasculature; and (4) that there is no measurable signal due to melanopsin stimulation in human visual cortical areas (V1, V2/V3, MT, LOC; measured with BOLD fMRI) at temporal frequencies most relevant to spatial vision (0.5–64 Hz) while modulations directed at L+M, L–M and S photoreceptor combinations yield characteristic temporal transfer functions in these areas. This work advances to our understanding of the functional significance of melanopsin function in the human visual system, contributing to the study of human health in relation to light and color

Reconstruction of solar irradiance variations in cycles 21–23 based on surface magnetic fields

All A&A articles are in open access one year after their publication date (August 2013).Aims: We present a reconstruction of total solar irradiance (TSI) back to 1974, i.e. from the minimum of cycle 21 to the declining phase of cycle 23. We also present a cross-calibration between the magnetograms obtained by the 512 channel magnetograph and the spectromagnetograph at Kitt Peak. Methods: The TSI reconstruction is carried out using data from the 512-channel Diode Array Magnetograph and the newer spectromagnetograph on Kitt Peak. The model is based on the assumption that all irradiance changes on time-scales of a day and longer are entirely due to the variations of the surface distribution of the solar magnetic field. The reconstructed irradiance is compared with the composite of total solar irradiance measurements from PMOD/WRC (version 41). Results: A good correspondence is found with the PMOD TSI composite, with no bias between the three cycles on time-scales longer than the solar rotation period, although the accuracy of the TSI reconstruction is somewhat lower when 512 channel magnetograph data are used. This suggests that the same driver of the irradiance variations, namely the evolution of the magnetic flux at the solar surface, is acting in cycles 21-23. Different methods of comparing the magnetograms obtained by the two Kitt Peak magnetographs give somewhat different results, with factors by which 512 channel data must be divided in the range 1.38-1.63 being found. This is due to the non-linearity of the relationship between the magnetic field measured by the two instruments

proceedings of a workshop held at Göttingen September 27 - 29, 2006

An international workshop entitled: Modern Solar Facilities - Advanced Solar Science was held in Göttingen from September 27 until September 29, 2006. The workshop, which was attended by 88 participants from 24 different countries, gave a broad overview of the current state of solar research, with emphasis on modern telescopes and techniques, advanced observational methods and results, and on modern theoretical methods of modelling, computation, and data reduction in solar physics. This book collects written versions of contributions that were presented at the workshop as invited or contributed talks, and as poster contributions.Vom 27. bis 29. September 2006 fand in Göttingen ein internationaler Workshop zum Thema: Modern Solar Facilities - Advanced Solar Science statt, der von 88 Teilnehmern aus 24 verschiedenen Ländern besucht wurde und der einen breiten Überblick über den gegenwärtigen Stand der sonnenphysikalischen Forschung gab, unter Betonung moderner Teleskope und Techniken, fortschrittlicher Beobachtungsmethoden und Ergebnisse, sowie zu modernen theoretischen Verfahren der Modellierung, Berechnung und Datenreduktion in der Sonnenphysik. Dieser Band fasst die schriftlichen Versionen von Beiträgen zusammen, die auf der Konferenz als eingeladene oder angemeldete Vorträge, sowie als Posterbeiträge präsentiert worden sind.conferenc

Forward modelling of Kepler-band variability due to faculae and spots

Variability observed in photometric light curves of late-type stars (on time-scales longer than a day) is a dominant noise source in exoplanet surveys and results predominantly from surface manifestations of stellar magnetic activity, namely faculae and spots. The implementation of faculae in light-curve models is an open problem, with scaling typically based on spectra equivalent to hot stellar atmospheres or assuming a solar-derived facular contrast. We modelled rotational (single period) light curves of active G2, K0, M0, and M2 stars, with Sun-like surface distributions and realistic limb-dependent contrasts for faculae and spots. The sensitivity of light-curve variability to changes in model parameters such as stellar inclination, feature area coverage, spot temperature, facular region magnetic flux density, and active band latitudes is explored. For our light-curve modelling approach we used ACTRESS, a geometrically accurate model for stellar variability. ACTRESS generates two-sphere maps representing stellar surfaces and populates them with user-prescribed spot and facular region distributions. From this, light curves can be calculated at any inclination. Quiet star limb darkening and limb-dependent facular contrasts were derived from MURaM 3D magnetoconvection simulations using ATLAS9. 1D stellar atmosphere models were used for the spot contrasts. We applied ACTRESS in Monte Carlo simulations, calculating light-curve variability amplitudes in the Kepler band. We found that, for a given spectral type and stellar inclination, spot temperature and spot area coverage have the largest effect on variability of all simulation parameters. For a spot coverage of 1 per cent⁠, the typical variability of a solar-type star is around 2 parts per thousand. The presence of faculae clearly affects the mean brightness and light-curve shape, but has relatively little influence on the variability

Framework for near real time feature detection from the atmospheric imaging assembly images of the solar dynamics observatory

The study of the variability of the solar corona and the monitoring of its traditional regions (Coronal Holes, Quiet Sun and Active Regions) are of great importance in astrophysics as well as in view of the Space Weather applications. The Atmospheric Imaging Assembly (AIA) of the Solar Dynamics Observatory (SDO) provides high resolution images of the sun imaged at different wavelengths at a rate of approximately one every 10 seconds, a great resource for solar monitoring . Today, the process of identifying features and estimating their properties is applied manually in an iterative fashion to verify the detection results. We introduce a complete, automated image-processing pipeline, starting with raw data and ending with quantitative data of high level feature parameters. We implement two multichannel unsupervised algorithms that automatically segments EUV AIA solar images into Coronal Holes, Quiet Sun and Active Regions in near real time. We also develop a method of post processing to deal with fragments in a segmented image by spatial validity based compact clustering. The segmentation results are consistent with well-known algorithms and databases. The parameters extracted from the segments like area closely follow the solar activity pattern. Moreover, the methods developed within the proposed framework are generic enough to allow the study of any solar feature (e.g. Coronal Bright points) provided that the feature can be deduced from AIA images

Science Requirement Document for the European Solar Telescope

The European Solar Telescope (EST)1 is a research infrastructure for solar physics. It is planned to be an on-axis solar telescope with an aperture of 4m and equipped with an innovative suite of spectro-polarimetric and imaging post-focus instrumentation. The EST project was initiated and is driven by EAST2, the European Association for Solar Telescopes. EAST was founded in 2006 as an association of 14 European countries. Today, as of December 2019, EAST consists of 26 European research institutes from 18 European countries. The Preliminary Design Phase of EST was accomplished between 2008 and 2011. During this phase, in 2010, the first version of the EST Science Requirement Document (SRD)was published. After EST became a project on the ESFRI3 roadmap 2016, the preparatory phase started. This phase is partially supported by EU funding through the PRE-EST H2020 project4. The goal of the preparatory phase is to accomplish a final design for the telescope and the legal governance structure of EST. A major milestone on this path is to revisit and update the Science Requirement Document (SRD). The EST Science Advisory Group (SAG) has been constituted by EAST and the Board of the PRE-EST4 EU project in November 2017 and has been charged with the task of providing with a final statement on the science requirements for EST. Based on the conceptual design, the SRD update takes into account recent technical and scientific developments, to ensure that EST provides significant advancement beyond the current state-of-the-art. The present update of the EST SRD has been developed and discussed during a series of EST SAG meetings: 1st telecon meeting on Nov 5th, 2017 2nd meeting in Freiburg, Nov 24, 2017 3rd telecon meeting, Dec 15, 2017 4th telecon meeting, March 26, 2018 5th meeting in Belfast, April 16 & 17, 2018 6th meeting in Naxos, June 16, 2018 7th telecon meeting, January 14, 2019 8th telecon meeting, October 11, 2019 9th telecon meeting, October 22, 2019 10th telecon meeting, December 3, 2019 The SRD develops the top-level science objectives of EST into individual science cases. Identifying critical science requirements is one of its main goals. Those requirements will define the capabilities of EST and the post-focus instrument suite. The technical requirements for the final design of EST will be derived from the SRD. The science cases presented in Part II (Sects. 1 to 8) are not intended to cover all the science questions to be addressed with EST, but rather to provide a precise overview of the capabilities that will make of EST a competitive state-of-the-art telescope to push the boundaries of our knowledge over the next few decades. The science cases contain detailed observing programmes specifying the type of observations needed to solve specific science problems. An eort is being made to define the parameters of the required observations as accurately as possible, taking into account both present capabilities and technological developments expected in the near future. The tables of the observing programmes corresponding to the science cases are compiled in Sect. 10. The EST science cases represent challenging observations that put strong constraints on the telescope and its instrument suite. Ultimately, they will be translated into Technical Requirement Document (TRD) leading to the final EST design to be implemented during the construction phase. The unique design advantages of the EST concept is presented in Section 11. The eect of the science cases on the EST design are discussed in Section 12 and summarized in Section 13.This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 739 50

Science requirement document (SRD) for the European Solar Telescope (EST) (2nd edition, December 2019)

The European Solar Telescope (EST) is a research infrastructure for solar physics. It is planned to be an on-axis solar telescope with an aperture of 4 m and equipped with an innovative suite of spectro-polarimetric and imaging post-focus instrumentation. The EST project was initiated and is driven by EAST, the European Association for Solar Telescopes. EAST was founded in 2006 as an association of 14 European countries. Today, as of December 2019, EAST consists of 26 European research institutes from 18 European countries. The Preliminary Design Phase of EST was accomplished between 2008 and 2011. During this phase, in 2010, the first version of the EST Science Requirement Document (SRD) was published. After EST became a project on the ESFRI roadmap 2016, the preparatory phase started. The goal of the preparatory phase is to accomplish a final design for the telescope and the legal governance structure of EST. A major milestone on this path is to revisit and update the Science Requirement Document (SRD). The EST Science Advisory Group (SAG) has been constituted by EAST and the Board of the PRE-EST EU project in November 2017 and has been charged with the task of providing with a final statement on the science requirements for EST. Based on the conceptual design, the SRD update takes into account recent technical and scientific developments, to ensure that EST provides significant advancement beyond the current state-of-the-art. The present update of the EST SRD has been developed and discussed during a series of EST SAG meetings. The SRD develops the top-level science objectives of EST into individual science cases. Identifying critical science requirements is one of its main goals. Those requirements will define the capabilities of EST and the post-focus instrument suite. The technical requirements for the final design of EST will be derived from the SRD

The Impact of Sunspot Rotation on Solar Flares

Solar flares are one mechanism to release stored magnetic energy in the Sun’s atmosphere. This thesis aims to determine whether sunspot rotation can inject the energy required for solar flares into the corona. This thesis investigates the relationship between sunspot rotation and solar flares, and the impact that sunspot rotation has on the strength and frequency of flare events. A robust analysis tool is developed which uses continuum images of the Sun to determine the rotation of sunspots. This tool is used throughout the thesis, first on the active region 11158, in an in-depth case study of the rotation and flaring properties of the region as it traverses the solar disc. The case study develops analysis techniques, such as introducing sunspot selection criteria, which are used in the following statistical studies. The first statistical study involves the analysis of the rotation and flaring properties of a sample of all sunspots that meet the selection criteria within all X-class flaring regions since the launch of the Solar Dynamics Observatory. As this first statistical study is biased towards higher flare-energy active regions, a second unbiased statistical study is carried out on all sunspots that meet the sunspot selection criteria between 1 May 2013 and 31 August 2013. The results of these statistical studies are combined and analysed, concluding that sunspot rotation injects enough energy (and in the majority of cases, an excess of energy) to account for the energy output by solar flare radiation. On average, the radiated bolometric flare energy outputs 65.6% of the injected energy due to the absolute sunspot rotation for the X-class flare sample, and 59.2% for the four-month sample

Modélisation de l'irradiance solaire spectrale dans le proche et moyen ultraviolet

Nous présentons un modèle pour l’irradiance solaire spectrale entre 200 et 400 nm. Celui-ci est une extension d’un modèle d’irradiance solaire totale basé sur la simulation de la fragmentation et l’érosion des taches qui utilise, en entrée, les positions et aires des taches observées pour chaque pas de temps d’une journée. L’émergence des taches sur la face du Soleil opposée à la Terre est simulée par une injection stochastique. Le modèle simule ensuite leur désintégration, qui produit des taches plus petites et des facules. Par la suite, l’irradiance est calculée en sommant la contribution des taches, des facules et du Soleil inactif. Les paramètres libres du modèle sont ajustés en comparant les séquences temporelles produites avec les données provenant de divers satellites s’étalant sur trois cycles d’activité. Le modèle d’irradiance spectrale, quant à lui, a été obtenu en modifiant le calcul de la contribution des taches et des facules, ainsi que celle du Soleil inactif, afin de tenir compte de leur dépendance spectrale. Le flux de la photosphère inactive est interpolé sur un spectre synthétique non magnétisé, alors que le contraste des taches est obtenu en calculant le rapport du flux provenant d’un spectre synthétique représentatif des taches et de celui provenant du spectre représentatif du Soleil inactif. Le contraste des facules est quand à lui calculé avec une procédure simple d’inversion de corps noir. Cette dernière nécessite l’utilisation d’un profil de température des facules obtenu à l’aide de modèles d’atmosphère. Les données produites avec le modèle d’irradiance spectrale sont comparées aux observations de SOLSTICE sur UARS. L’accord étant peu satisfaisant, particulièrement concernant le niveau d’irradiance minimal ainsi que l’amplitude des variations, des corrections sont appliquées sur le flux du Soleil inactif, sur le profil de température des facules, ainsi qu’à la dépendance centre-bord du contraste des facules. Enfin, un profil de température des facules est reconstruit empiriquement en maximisant l’accord avec les observations grâce à un algorithme génétique. Il est utilisé afin de reconstruire les séquences temporelles d’irradiance jusqu’en 1874 à des longueurs d’ondes d’intérêt pour la chimie et la dynamique stratosphérique.We present a model for spectral solar irradiance between 200 and 400 nm. It is an extension of a model for total solar irradiance based on sunspots fragmentation and erosion. This model takes the observed sunspot position and area as input for every oneday time step whereas emergences on the far side of the Sun are injected stochastically. The model simulates the spot’s disintegration and fragmentation into smaller structures such as spots and faculae and produces a magnetic structures area distribution evolving with time. The model contains many free parameters controlling the spots fragmentation, the quiet Sun irradiance, etc. They are adjusted by comparing the model outputs with observations from satellites spanning approximately three activity cycles. The model for spectral irradiance is a modified version of the model for total irradiance. More precisely, the spots and faculae contrast calculation and the quiet Sun contribution are adjusted to account for their spectral dependance. First, the quiet Sun flux is interpolated on a non magnetic synthetic spectrum, while the spots contrast is calculated with the ratio of the flux from a synthetic spectrum colder than the non magnetic photosphere, and the flux from a quiet Sun spectrum. The facular brightening is calculated with a simple procedure using the black body theory. This procedure interpolates a temperature associated with the formation height of photons from faculae on a temperature profile resulting from model atmosphere calculations. The spectral irradiance time series calculated with the model are compared to data from SOLSTICE on UARS. The two data sets do not agree very well, especially when we consider the minimum irradiance level and the amplitude variations over a complete cycle. Therefore, we apply a correction on the quiet Sun level and on the facular temperature profile. Finally, using a genetic algorithm, we reconstruct an empirical facular temperature profile by maximizing the fitness with observations. We use it to reconstruct spectral irradiance time series starting in 1874 at wavelengths of interest for stratospheric chemistry and dynamics